• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.898-901
• /
• 2003

In order to get the drive reliability and low Power-consumption characteristics, most of small form factor HDD has und the load/unload mechanism instead of CSS type. Compared with CSS mechanism, the load/unload system has little opportunity of head/media contact during the disk spin-up and down. However, the load/unload mechanism needs the precise integration technology with slider, suspension, ramp and load/unload velocity, and all of these component s should be designed simultaneously, not an individually. In this paper, we focus the design of the suspension stiffness using the specified ABS design. We use the CML software to calculate the load/unload dynamic and use the RSM(Response surface method) to get the optimal condition of the suspension stiffness.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.902-905
• /
• 2003

It's general a trend to use the load/unload mechanism in the small form factor HDD, like 2.5", 1.8" and 1.0". The load/unload mechanism has tittle opportunity of head/media contact during the disk spin-up and down. However, the load/unload mechanism needs the precise integration technology with slider, suspension ramp, load/unload velocity and so on, and all of these components should be designed simultaneously, not an individually. In this paper, we measured the load/unload velocity in the drive level, and executed the load/unload dynamics with this velocity profiles. We could find the current load/unload mechanism suitable to the long load/unload test.

• 한국자기학회지
• /
• 제10권1호
• /
• pp.22-29
• /
• 2000

Ca-Zr이 치환된 YIG산화물 자성체의 유효 선폭이 마이코로파 진동수 9.43 GHz에서 공동공진기의 섭동법에 의해 측정되었다. 실험장치는 network analyzer, 전자석, 공동 공진기로 구성되었으며, 시편이 삽입된 공진기에서 정자기장의 변화에 따른 공명진동수와 품질인자의 측정치로부터 계산된 마이크로파 자기감수율 텐서의 대각성분에 의해 분석되었다. 유효 선폭은 균일 모드와 스핀파가 축퇴되는 영역에서 급격한 손실을 보이며, 축퇴영역 밖에서도 비교적 큰 손실을 보이고 있다.

• Journal of Magnetics
• /
• 제2권2호
• /
• pp.38-41
• /
• 1997

Spinel ferrite thin films Fe3-x MnxO4 (x=0.000, 0.006, 0.0010, 0.015, 0.023) were prepared on the coverglass by ferrite plating technique. To investigate the uniaxial anisotrpy of the samples, the saturation and effective magnetization of the thin films were measured by VSM(vibrating sample magnetometer) and FMR(ferromagnetic resonance) measurements respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For x=0.000, 0.006, the effective magnetization was measured of temperatures form T=77 K to T=300 K. The results were analyzed in terms of Bloch's law Ms(T) = Ms(0) (1-BT3/2-CT5/2). The Bloch coefficient B, C were determined by fitting. Ms(0) was obtained by extrapolating Meff to 0 K. From this result, the spin wave stiffness constants D was also determined.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.922-927
• /
• 2001

Single-layer green ELs was fabricated with using molecularly-dispersed Bu-PBD into poly-N-vinylcarbazole(PVK) which has low operating voltage and high quantum efficiency. A EL cell structure of glass substrate/indium-tin-oxide/PVK:Bu-PBD:C6(∼ 100nm)/Ca(20nm)/Al(20nm) was employed with variable doping concentration. The keys to obtain high quantum efficiency was excellent film forming capability of molecularly dispersed into PVK and appropriate combination of cathode for avoiding exciplex. We obtained the turn-on voltage of 4.2V and quantum efficiency of 0.52% at 0.lmol% of C6 concentration which has been improved about a factor of 50 in comparison with the undoped cell. The PL peak wavelengths wouldn\`t be turned by changing the concentration of the C6 dopant. Green EL emission peak and FWHM were 520nm and 70nm respectively. PL emission peak was obtained at 495nm.

• 벤처창업연구
• /
• 제9권1호
• /
• pp.69-77
• /
• 2014

연구소기업은 연구기반 스핀오프(research-based spin-offs)의 범주에 포함되지만 기술사업화 과정에서 일반적인 연구기반 스핀오프와는 구별되는 특징을 가지고 있다. 본 연구는 연구자의 창업의지로 나타나는 기업가정신의 확산을 중심으로 연구소기업 설립 운영의 효과를 분석하는데 목적이 있다. 이를 위해 22개 연구소기업에 대한 심층 인터뷰 결과와 14개 공공연구기관 200명의 유효 응답자로부터 얻은 결과를 분석한다. 분석의 주요 결과는 다음과 같다. 첫째, 연구소기업 설립 여부와 설립 건수 모두 연구자의 창업의지로 나타나는 기업가정신의 확산과 강화에 유의한 양(+)의 영향을 미치는 것으로 나타났다. 둘째, 연구자의 개별 특성 측면에서는 연구자의 기술이전 여부 및 기술이전 건수가 창업의지에 영향을 주는 주요한 요인으로 나타났다. 셋째, 매출액, 고용창출, 연구개발 투자 등과 같은 경제적인 효과와 더불어 기업가정신의 확산과 강화를 연구소기업 설립 운영의 긍정적인 효과로 볼 수 있다. 기업가정신의 확장과 경제적 성과라는 측면에서 연구소기업이 가지고 있는 장점이 실제 연구소기업을 설립, 운영하는 과정에서 실현될 수 있는지를 검토함으로써 향후 연구소기업 설립 및 운영의 전반적인 방향을 설정하는데 유용한 자료를 제시하였다는 점에서 본 연구의 의의가 있다.

• Investigative Magnetic Resonance Imaging
• /
• 제4권1호
• /
• pp.27-33
• /
• 2000

목적: 전자상자성 공명(Electron Paramagnetic Resonance EPR)을 사용하여, 현재 상용되고 있는 세가지 상자성 자기공명 조영제, Gd-DTPA, Gd-DTPA-BMA, Gd-DOTA의 전자스핀 이완시간 $T_{le}$를 결정하고자 한다. 대상 및 방법: 본 연구에 사용된 상자성 자기공명 조영제는 Gd-DTPA(Magnevist), Gd-DTPA-BMA(OMNISCAN), Gd-DOTA(Dotarem)이다. 이들 자기공명 조영제들은 2:1 부피 비율의 메탄올과 물의 혼합용액에 희석하여 저온의 glassy상태에서 EPR스펙트럼을 얻었으며, 또한 주어진 영 자기장 갈라지기 (zero-field splitting, ZFS)변수를 $3{\times}3$ 텐서량으로 계산하는 컴퓨터 시뮬레이션 프로그램 'GEN'을 사용하여, 이들 조영제들에 대한 각각 다른 ZFS변수를 가지는 시뮬레이션 스펙트럼을 만들었다. 이 결과들과 McLachlan의 평균이완율 이론을 적용하여 전자스핀 이완시간이 결정되었다. 결과: 상자성 자기공명 조영제 Gd-DTPA, Gd-DTPA-BMA, Gd-DOTA의 전자 횡축 스핀이완시간($T_{2e}$)은 각각 0.113ns, 0.147ns, 1.81ns, g-value는 1,9737, 1.9735, 1.9830, 전자스핀 이완시간($T_{le}$)는 18.70ns, 33.40ns, $1.66{\mu}s$로 결정되었다. 결론: 실험 결과로부터 상자성 자기공명 조영제의 ZFS변수가 클수록 짧은 전자스핀 이완시간 $T_{le}$를 가진다는 일반적인 사실을 재 확인할 수 있었다. 본 연구에 사용된 3가지 자기 공명 조영제들 중에는 화학적으로 환상구조 배위자를 갖는 Gd-DOTA가 가장 긴 전자스핀 이완시간 $T_{le}$를 가지는 것으로 나타나서 일반적으로 환상구조 배위자를 갖는 조영제들이 선상구조 배위자를 갖는 조영제에 비해 전자적인 성질은 우수한 것으로 나타났고 결론적으로 상자성 조명제가 물분자의 자기이완시간에 미치는 영향을 평가하고 고효율 상자성 자기 공명 조영제 개발에는 정확한 ZFS변수 결정이 매우 중요하다는 것을 알 수 있었다.

• 한국자기공명학회논문지
• /
• 제9권1호
• /
• pp.48-60
• /
• 2005

Purpose: The purpose of this study was to design and build an optimized birdcage resonator configuration with a low pass filter, which would facilitate the acquisition of high-resolution 3D-image of small animals at 3T MRI system. Methods and Materials: The birdcage resonator with 12-element structures was built, in order to ensure B1 homogeneity over the image volume and maximum filling factor, and hence to maximize the signal to noise ratio (SNR) and resolution of the 3-dimensional images. The diameter and length of each element of a birdcage resonator were as follows: (1) diameter 13 cm, length 22 cm, (2) diameter 15 cm, length 22 cm, (3) diameter 17 cm, length 25 cm. Spin echo pulse sequence and fast spin echo pulse sequence were employed in obtaining MR images. The quality of the manufactured birdcage resonators wes evaluated on the basis of the return loss following matching and tuning process. Results: The experimental MR image of phantoms by the various manufactured birdcage resonators were obtained to compare the SNR in accordance with the size of objects. The size of an object to that of coil was identified by parameters that were estimated from the image of a phantom. First, the diameter of the birdcage resonator was 15cm, and the ratio of the tangerine to the birdcage resonator accounted for approximately 27%. The Q factor was 53.2 and the SNR was 150.7. Second, at the same birdcage resonator, the ratio of the orange was approximately 53%. The SNR and the Q parameter was 212.8 and 91.2, respectively. Conclusion: The present study demonstrated that if birdcage resonators have the same forms, SNR could be different depending on the size of an object, especially when the size of an object to that of coil is approximately 40~80%, the former is bigger than the latter. Therefore, when the size of an object to be observed is smaller than that of coil, the coil should be manufactured in accordance with the size of an object in order to obtain much more excellent images.

• 대한화학회지
• /
• 제24권2호
• /
• pp.91-100
• /
• 1980

축방향대칭을 갖는 팔면체 $[Ti(III)A_3B_3]$형태 착물의 자기모멘트를 계산하는 식을 유도하여 distortion parameter$({\delta})$, 스핀-궤도 상호작용상수$({\zeta}')$ 및 orbital reduction factor의 실험치를 사용하여 이들 착물의 자기모멘트를 계산하였다. 축방향으로 일그러진 팔면체 $[Ti(III)A_3B_3]$형태 착물의 계산한 자기모멘트가 실험치와 비교적 일치하였다. 팔면체로부터 축방향 일그러짐이 커짐에 따라 그리고 orbital reduction factor가 감소함에 따라 계산한 자기모멘트의 값이 크게 감소하였다. 축방향대칭보다 낮은 리간드장으로 일그러진 팔면체착물의 자기모멘트를 계산하는 방법을 발전시켰으며 계산한 자기모멘트를 기초로 하여 일그러진 팔면체 $[Ti(III)A_3B_3]$형태 착물의 구조를 논의하였다.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.245-250
• /
• 2011

Parallel imaging technique can provide several advantages for a multitude of MRI applications. Especially, in SENSE technique, sensitivity maps were always required in order to determine the reconstruction matrix, therefore, a number of difference approaches using sensitivity information from coils have been demonstrated to improve of image quality. Moreover, many filtering methods were proposed such as adaptive matched filter and nonlinear diffusion technique to optimize the suppression of background noise and to improve of image quality. In this study, we performed SENSE reconstruction using computer simulations to confirm the most suitable method for the feasibility of filtering effect and according to changing order of polynomial fit that were applied on variation of spatial resolution of sensitivity map. The image was obtained at 0.32T(Magfinder II, Genpia, Korea) MRI system using spin-echo pulse sequence(TR/TE = 500/20 ms, FOV = 300 mm, matrix = $128{\times}128$, thickness = 8 mm). For the simulation, obtained image was multiplied with four linear-array coil sensitivities which were formed of 2D-gaussian distribution and the image was complex white gaussian noise was added. Image processing was separated to apply two methods which were polynomial fitting and filtering according to spatial resolution of sensitivity map and each coil image was subsampled corresponding to reduction factor(r-factor) of 2 and 4. The results were compared to mean value of geomety factor(g-factor) and artifact power(AP) according to r-factor 2 and 4. Our results were represented while changing of spatial resolution of sensitivity map and r-factor, polynomial fit methods were represented the better results compared with general filtering methods. Although our result had limitation of computer simulation study instead of applying to experiment and coil geometric array such as linear, our method may be useful for determination of optimal sensitivity map in a linear coil array.