• 대한기계학회논문집B
• /
• 제36권9호
• /
• pp.907-913
• /
• 2012

연속적으로 누출되면서 원형으로 퍼져가고 있는 액체에 대한 모델에 대한 고차 섭동 해를 구하여 1차 섭동 해를 개선하였다. 일반적인 해를 얻기 위하여 무차원화된 지배방정식을 유도하고 무차원 지배 변수를 도출하였다. 무차원 증발계수를 섭동 변수로 이용하였다. 계산 결과 부피 및 확산 반경에 관해서 고차 섭동해가 1차 섭동 해를 개선시키고 있으며, 섭동해의 차수가 증가함 따라 오차를 감소시키는 경향을 보였다. 3차 섭동 해는 수치 해와 거의 일치하고 있어 3차 섭동해의 타당성을 보여주고 있다.

• 에너지공학
• /
• 제23권4호
• /
• pp.41-48
• /
• 2014

지금까지 관행적으로 액체의 누출은 순간누출과 연속누출로 분류 되어 왔다. 본 논문에서는 이러한 분류의 문제점을 인식하고 새로운 분류 방법을 찾기 위하여 제한된 시간 동안 누출되는 극저온 액체의 확산에 관한 연구를 수행하였다. 이러한 물리적 현상은 누출된 액체풀의 부피, 반경, 높이에 관한 연립방정식에 의해 지배되며, 주요 변수는 단위면적당 증발률, 누출시간, 누출량의 3 개 이다. 섭동법에 의한 해를 효율적으로 구하기 위하여 독립된 형태의 부피에 관한 2차 미분방정식을 얻었다. 이 새로운 지배 방정식은 기존의 방법에 비하여 매우 간단하게 해를 얻을 수 있게 한다. 섭동해의 결과, 동일한 누출량인 경우에 누출시간이 작으면 연속누출이 순간누출로 이어지는 혼합 형태의 누출이 되나, 누출시간이 크게 되면 연속누출 형태로만 존재하게 된다. 동일한 누출시간의 경우에는 누출량이 작으면 연속누출 형태로만 존재하지만, 누출량이 증가할수록 혼합형태의 누출로 된다. 이러한 2개의 영역을 분할하는 경계를 섭동해를 이용하여 해석적으로 제시함으로서 누출의 새로운 분류에 대한 명확한 근거를 제시 하였다.

• 대한토목학회논문집
• /
• 제29권3B호
• /
• pp.221-230
• /
• 2009

국내 주요 상수 취수원은 동일한 하천 및 호수에 하수 처리장이 위치해 있어 처리 방출수로 인한 악영향을 받게 된다. 또한 하천을 따라 건설된 도로나 교량에서 발생하는 교통사고나 수질 오염사고로 인한 하천 내의 오염물 유입은 취수장 운영에 큰 어려움을 주게 된다. 특히 우리나라 주요 상수원에 해당하는 팔당호의 경우 호수면적에 비해 유역면적이 상당히 크기 때문에 다양한 수질 오염사고에 노출되어 있다. 따라서 사전에 발생 가능한 수질사고를 모의하고 이에 대한 대책을 모색하는 일이 매우 중요하다. 본 연구에서는 팔당호 주변에서 발생할 수 있는 수질 오염사고에 대한 수질모의를 수행하였다. 2차원 수치모형을 이용하여 사고로 유입된 오염물질의 혼합거동을 모의하였고, 팔당호에 위치한 주요 취수장에 미치는 영향을 분석하였다. 이를 위해서 2차원 흐름모형인 RMA-2를 이용하여 유속장을 모의하고, 이 결과를 2차원 하천수질 해석모형인 RAM4에 입력하여 오염물질의 시간에 따른 거동을 분석하였다. 갈수기 수질사고 발생시 저감방안으로써 남한강과 북한강의 유량증대에 따른 오염물질의 희석 및 수세 효과에 대해 분석하였다. 분석결과 유량증대에 따라 오염물질의 최대 농도는 더 높아지면서 더 빠르게 이동하는 현상을 관찰할 수 있었다. 따라서 오염물질이 주입된 지점에서의 초기 희석 효과보다는 빨라진 흐름에 의한 수세 효과가 훨씬 더 크게 나타난 것으로 판단된다. 이를 통해 독성 오염물질로 인한 수질사고 발생시 유량증대에 의한 수세 효과가 취수장 운영에 있어 유리한 대책이 될 수 있음을 확인할 수 있다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.123-136
• /
• 2015

The present study numerically investigates the effect of shield on the flow characteristics of Hartmann whistle. The flow characteristics of un-shielded Hartmann whistle are compared with whistles of different shield heights 15 mm, 17 mm, 20 mm, 25 mm and 30 mm. The comparison of Mach number contours and transient velocity vectors of shielded Hartmann whistles with un-shielded ones for the same conditions reveal that the presence of shield causes the exiting jet to stick to the wall of the shield without causing spill-over around the cavity inlet, thus sustaining the shock oscillation as seen in the unshielded Hartmann whistle, which has intense flow/shock oscillation and spill-over around the cavity mouth. The velocity vectors indicate jet regurgitance in shielded whistles showing inflow and outflow phases like un-shielded ones with different regurgitant phases. The sinusoidal variation of mass flow rate at the cavity inlet in un-shielded Hartmann whistle indicates jet regurgitance as the primary operating mode with large flow diversion around the cavity mouth whereas the non-sinusoidal behavior in shielded ones represent that the jet regurgitance is not the dominant operating mode. Thus, this paper sufficiently demonstrates the effect of shield in modifying the flow/shock oscillations in the vicinity of the cavity mouth.

• Nuclear Engineering and Technology
• /
• 제35권2호
• /
• pp.91-107
• /
• 2003

Since DBA(Design Basis Accidents) has been studied rather separately from SA(Severe Accidents) in the conventional nuclear reactor safety analysis, the thermal hydraulics during transition between DBA and SA has not been identified so much as each accident itself. Thus, in this study, the thermal hydraulic behavior from DBA to the commencement of SA has been experimentally and analytically investigated for the long-term cooling phase of LB-LOCA(Large-Break Loss-of-Coolant Accident). Experiments were conducted for both cases of the loop seal open and closed in an integral test loop, named as SNUF (Seoul National University Facility), which was scaled down to l/6.4 in length and 1/178 in area of the APR1400 (Advanced Power Reactor 1400MWe). The core mixture level was a main measured value since it took major role in the fuel heat-up rate, the location of fuel melting initiation and the channel blockage by melting material during SA. Experimental results were compared to MAAP4.03 to assess its model of calculating the core mixture level. MAAP4.03 overestimates the core two- phase mixture level because sweep-out and spill-over and the measures to simulate the status of loop seal are not included, which is against the conservatism. Thus, it is recommended that MAAP4.03 should be improved to simulate the thermal hydraulic phenomena, such as sweep-out, spill-over and the status of loop seal.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.69-76
• /
• 2000

Bubble boom may be a good alternative for the prevention of oil spill pollution due to its easy deployment and clean post-process tasks. The present work is focused on the experimental investigation of air bubble movement for the bubble boom by visualization and quantitative PIV measurements. Bubble plume was generated by adjusting the pressure of pressure vessel ranging 6.7 kpa to 14.7 kpa. The results showed at lower inlet velocity and higher supply air flow rate that bubble boom maintained its containing capability reasonably well up to the maximum containing limit.

• 한국안전학회지
• /
• 제10권1호
• /
• pp.41-49
• /
• 1995

A potable oil skimmer is in need to remove spilt oils before they spread, which is applicable to various situations of oil viscosity, spill location, current, tides, waves and wind. An air suction skimmer was selected to be developed because of its advantages such as simple structure, excellent transportability, and easy deployment. A prototype operating by a commercial vacuum cleaner was fabricated. Tests of the skimmer showed good performance : the maximum suction rate of water and suction head were 18㎥/h and 2.7m, respectively.

• Journal of Preventive Medicine and Public Health
• /
• 제42권2호
• /
• pp.82-88
• /
• 2009

Objectives : Our objective was to examine and evaluate the psychological health of the residents of Taean during the cleanup of the Hebei Spirit(HS) oil spill and to review some factors associated with the results. Methods : A community survey of 71 men and women was conducted 8 weeks after the HS oil spill. Questionnaires used were the PWI(Psychological Well-being Index) scale for psychosocial distress, the CES-D(Center for Epidemiologic Studies-Depression) scale for depressive symptoms, and a questionnaire created to assess suicidal impulses. Results : The overall prevalence of high-risk psychosocial distress among the study group was 64.2%. The percentages of respondents with scores on the CES-D Scale above 16 and above 21 were 77.6% and 62.7%, respectively. The percentage of respondents categorized as having suicidal impulses was 18.3%. When compared with unexposed groups in the general population taken from various sources, the residents of Taean were 6.5 times as likely to have high stress and 9.4-9.7 times as likely to be depressed. No significant difference in the rate of suicidal impulse was found between the residents of Taean and the general population. Factors associated with high stress, depression, and suicidal impulses were age, a change in income, educational level, number of days working on the cleanup, and positive responses to questions about "affected daily activity" and "hospital visit due to work on cleanup". Conclusions : The results suggest that the HS oil spill had a significant impact on the psychological health of residents of Taean, but the comparability of the unexposed groups is a limitation of the study.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.47-55
• /
• 2000

A three-dimensional digital image processing technique is proposed to quantitatively predict the dispersion phenomena of oil droplet onto the surface of the water. This technique is able to get the dispersion rate of an oil droplet three-dimensionally just below the surface of the water over time. The obtained dispersion rate obtained through this technique is informative to the investigation into the relationship among the gravity, surface tensions between oil, water, and air. This technique is based upon the three-dimensional PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a three CCD(Charge Coupled Device) cameras, an image grabber, and a host computer in which an image processing algorithm is adopted for the acquisition of dispersion rate oil an oil droplet.

• 한국물환경학회지
• /
• 제39권6호
• /
• pp.439-450
• /
• 2023

The Yeongsan River, a major water resource for Jeollanam-do, that is adjacent to industrial complexes and agricultural areas, is exposed to water pollution. Therefore, it is necessary to investigate the impact of water pollution incidences and prepare response systems for river environment safety for other water resources in the future. Environmental Fluid Dynamics Code (EFDC) was applied to the mainstream of the Yeongsan River where residential, commercial, and agricultural areas are located to analyze the behavior of pollutants conducting the scenario analysis. Considering the pollutants that affected the study area, two pollutants, oil and benzene, with different physical and chemical characteristics were selected for the analysis. As a result of comparing the actual and simulated values of the water elevation, temperature, and flow rate, it was confirmed that the model adequately reproduced the hydraulic characteristics of the Yeongsan River. The oil flow dynamics showed that an increase in flow rate led to reduction in the maximum height of the slick. Notably, the behavior of the oil was predominantly influenced by the wind conditions. In the case of benzene, lower flow scenarios exhibited decreased arrival times and residence times accompanied by an elevation in the maximum concentration levels. From the results of pollutant behavior in the study area, it is feasible to utilize the section of tributary confluence for collection and the weir area for dilution. This study enhances the understanding of the pollutant's behavior with different characteristics and develops effective control systems tailored to the physicochemical attributes of pollutants.