• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1802-1812
• /
• 2001

The purpose of this study is to analyze numerically the movement of particles included in turbulent fluid flow characteristics of metallic surfaces. To describe fluid flew, the incompressible Navier-Stokes equation discretized by the finite volume method were solved on the non-orthogonal coordinates with non-staggered variable arrangement, and the k-$\xi$ turbulence model was adapted. After fluid flow was calculated, particle movement was predicted from the Lagrangian approaches. Non-essential complexities were avoided by assuming that the particles had spherical shapes and the Stoke's drag formula only consisted of external farces acting upon them. In order to validate the numerical calculations, the results were compared with the experimental data reported in literature and agreed well with them. The drag force coefficient equation showed better agreement with the experimental data in the prediction of particle movement than the correction factor equation. Impact velocity and impact angle increased as inlet turbulence intensity decreased, relative jet height was lower. or the Reynolds number was larger.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1326-1338
• /
• 1997

Electrical characteristics of soot particles in a LPG diffusion flame were studied for the control of soot particle coagulation. When a DC voltage was applied between two electrodes installed parallel to gas flow, ionic wind effect caused soot deposition on the cathode, implying that most of the soot particles were positively charged. Soot deposit on the cathode linearly increased and was saturated with respect to the strength of the applied voltage. The possibility of applying an AC voltage to enhance the particle coagulation was then investigated and the efficiency of the size control was checked with transmission electron microscope photographs. For the amplitude of 2 kV AC field, primary (spherical) soot particle size decreased from 30 ~ 40 nm to around 20 nm when the frequency of the applied AC voltage was 60 Hz and higher. Collisions between the soot particles in such a selected AC condition could lead to the formation of much bigger agglomerates of roughly 1-5 .mu.m in size.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.547-554
• /
• 1992

본 연구에서는 Climet사의 백색광원 OPC인 CI226와 PMS사의 laser 광원 OPC인 LAS-X 및 HS-LAS의 응답특성을 측정하여 제작사가 제시한 응답특성과 비교하여 그 정 확성을 논하였으며 아울러 고유량(high flow rate) Clean Room용 OPC인 Climet CI- 7300, Met One 200, Hiac/Royco5120 등 3가지 장치에 관한 오계수의 원인을 박히고자 하였다.

• 공업화학
• /
• 제20권2호
• /
• pp.201-207
• /
• 2009

Dodecanol 합성을 위한 methyl dodecanoate의 수소화반응을 위하여 copper chromite를 세라믹법, 공침법 및 개량된 공침법으로 합성하였다. 입자의 형상은 SEM 및 XRD로 확인하였으며 수소화 반응후 얻어진 생성물은 GC, GC/MSD 및 NMR로 분석하였다. 합성된 입자는 (1) 3.2에서 $7.0{\mu}m$ 크기의 구형형태(세라믹법), (2) 50에서 500 nm 크기의 구형이 혼재한 판형태(공침법) 및 (3) 작고 균일한 구형형태(개량된 공침법)를 보였다. 입자의 크기를 제어하기 위하여 PEG, Span 80 및 polyacrylate등 다양한 분산제 용액에서 copper chromite를 합성하였다. PEG (Mw = 4000) 수용액에서 합성한 입자가 30~50 nm 크기로 가장 작고 균일하였으며, $280^{\circ}C$ 및 100 atm에서 촉매의 반응성을 테스트한 결과, dodecanol의 수율은 79.9%로 얻어졌다. 수소화반응에서 촉매의 반응성은 촉매의 크기가 작고 균일할수록 높아지는 경향을 보였다. 최적화된 반응조건인 $280^{\circ}C$ 및 240 atm에서 dodecanol의 수율은 95.5%였다.

• 자원리싸이클링
• /
• 제25권6호
• /
• pp.41-49
• /
• 2016

본 연구에서는 코발트 염화물($CoCl_2$) 용액을 원료로 하여 분무열분해 반응에 의하여 평균입도 50 nm 이하의 코발트 산화물($Co_3O_4$) 분말을 제조하였으며 원료용액이 분사되는 노즐 팁의 크기 변화에 따른 입자들의 특성 변화를 파악하였다. 노즐 팁의 크기가 1 mm인 경우에는 형성된 대부분의 액적형태는 구형을 이루고 있으며 표면은 매우 치밀한 조직을 나타내고 있음을 알 수 있었다. 최종 형성된 입자들의 평균입도는 20 ~ 30 nm이었다. 노즐 팁의 크기가 2 mm인 경우에는 형성된 액적형태는 일부는 구형을 이루고 있었지만 상당 부분은 심하게 분열된 형태를 나타내고 있었다. 노즐 팁 크기가 5 mm인 경우에는 구형을 이루는 액적형태는 거의 존재하지 않았으며 거의 대부분 심하게 분열된 상태를 나타내고 있었다. 액적형태의 표면조직은 다른 노즐 팁 경우에 비하여 치밀함이 크게 감소하였다. 형성된 입자들의 평균입도는 약 25 nm이었다. 노즐 팁 크기가 1 mm로부터 2 mm 및 3 mm로 증가함에 따라 XRD 피크들의 강도는 거의 변화가 없는 반면 노즐 팁 크기가 5 mm로 증가되는 경우에는 피크의 강도가 현저히 감소하게 되었다. 노즐 팁 크기가 1 mm로부터 2 mm 로 증가함에 따라 입자들의 비표면적은 감소하였으며 5 mm로 증가되는 경우에는 비표면적이 현저히 증가하였다.

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.88-99
• /
• 1999

The purpose of this study was to investigate the physical properties of experimental composite resins made with the spherical and crushed fillers. The 14 experimental composite resins containing 0, 5, 10, 15, 20 and 25%(w/w) in spherical filler group and 0, 10, 20, 30, 40, 50, 60 and 70%(w/w) in crushed filler group, incorporated in a Bis-GMA matrix (Aldrich Co., USA), were made with 1% ${\gamma}$-methoxy silane treated fillers. The polymer matrix was made by dissolving 0.7%(w/w) of benzoyl peroxide(Janssen Chemical Co. Japan) in methacrylate monomer, whereupon 0.7%(v/v) N,N-dimethyl-p-toluidine(Tokyo Kasei Co. Japan) was added to the monomer. The weight percentage of each specific particle size distribution could be determined from a knowledge of the specific gravity, the weight(w/w), and corresponding volume %(v/v) of the filler sample in resin monomer. In crushed silica group and spherical silica group, the diametral tensile strengths and compressive strengths were measured with Instron Testing Machine(No.4467), and analyzed in 14 experimental composite resins made by filler fractions. The shear bond strength of 14 experimental composite resins to bovine enamel was measured with universal testing machine(Instron No.4467). The fracture surfaces were sputter-coated with a gold film and investigated by SEM. The results were as follows; 1. The diametral tensile strength was tendency to increase in crushed silica group, but not in spherical silica group. The highest diametral tensile strength was found in 20% filler fractions of two groups. 2. The compressive strength was higher in 15%(w/w) and 20%(w/w) in spherical silica group than in crushed silica group, but not in spherical silica group. 3. The significant correlation was noticed in increase in shear bond strength in crushed silica group, but not in spherical silica group. 4. The significantly highest shear bond strength was noticed in 50% filler concentration in crushed silica group, and in 15% filler concentration in spherical silica group, it was not significant in relation. 5. In crushed silica group, cut surface of resin matrix and the interface between resin and filler is obvious. In spherical silica group, fractures that occurred through the filler particles were round in shape.

• Korea-Australia Rheology Journal
• /
• 제14권4호
• /
• pp.203-207
• /
• 2002

Particle-particle interaction is of great importance in the study of suspension rheology. In this research we have investigated the hydrodynamic interaction between two identical cylinders in viscoelastic fluids numerically as a model problem for the study of viscoelastic suspension. We confine two neutrally buoyant cylinders between two parallel plates and impose a shear flow. We determine the migration velocity of two cylinders. The result shows that cylinders move toward or away from each other depending upon the initial distance between them and that there is an equilibrium distance between two cylinders in viscoelastic fluids regardless of the initial distance. In the case of Newtonian fluid, there is no relative movement as expected. The results partly explain the chaining phenomena of spherical particles in shear flows of viscoelastic fluids.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.629-632
• /
• 1989

The scattered light intensity from a spherical particle passing through the cross-over region of two coherent laser beams, varies periodically. Photodetection of this light beams produces a periodic signal of varying amplitude. The phase of the signal varies with the particle size and refractive index, the beam crossing angle and wavelength, and the position and size of the scattered ligth collecting aperture. In this paper the phase variation with respect to the particle absorptive index of retraction, collecting lens size and beam crossing angle is calculated using both Mie scattering theory and reflection theory. The two theories show good agreement in phase predictions, especially for large absorptive indices and for small collection lenses. Both theories predict phase to be inversely proportional to the beam crossing angle.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권1호
• /
• pp.42-50
• /
• 2001

The activity of immobilized cell-support particle aggregates is influenced by physical and biochemical elements, mass transfer, and physiology. Accordingly, the mathematical model discussed in this study is capable of predicting the steady state and transient concentration profiles of the cell mass and substrate, plus the effects of the substrate and product inhibition in an immobilized cell-support aggregate. The overall mathematical model is comprised of material balance equations for the cell mass, major carbon source, dissolved oxygen, and non-biomass products in a bulk suspension along with a single particle model. A smaller bead size and higher substrate concentration at the surface of the particle, resulted in a higher supply of the substrate into the aggregate and consequently a higher biocatalyst activity.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.462-463
• /
• 2006

Monodispersed and nano-sized Ni powders were synthesized from aqueous nickel sulfate hexahydrate $(NiSO_4{\cdot}6H_2O)$ inside nonionic polymer network by using wet chemical reduction process. The sucrose was used as a nonionic polymer network source. The effect of reaction conditions such as the amount of sucrose and a various reaction temperature, nickel sulfate hexahydrate molarity. The influence of a nonionic polymer network on the particle size of the prepared Ni powders was characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and particle size analysis (PSA). The results showed that the obtained Ni powders were strong by dependent of the reaction conditions. In particular, the Ni powders prepared inside a nonionic polymer network had smooth spherical shape and narrow particle size distribution.