• 한국안광학회지
• /
• 제10권4호
• /
• pp.405-410
• /
• 2005

광학적 관점에서 비점수차를 제거한 구면 안경렌즈의 전면부 곡률반경을 계산하고, 시중에 판매중인 외국계 국산 제품 및 국산 안경렌즈에 대한 곡률반경을 구면계를 이용하여 측정하고 비교 분석하였다. 자동 렌즈 메터로 측정한 굴절력 조사에 대해서는 조사된 제품 모두 측정 오차 내에서 정확한 굴절력을 나타내었으나, 회사에 따라 전면부의 곡률반경이 다소 다른 것을 알 수 있었다. 비점수차를 제거한 진켄-좀머(Zinken-Sommer) 조건식으로부터 유도된 전면부의 곡률반경과 비교할 때 조사된 제품 모두 최적의 조건에서 다소 벗어나는 평평한 곡률반경을 보였으며, 미용적인 측면이 강조되어서 제작되지 않았나 하는 것으로 본 연구를 통해 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.266-271
• /
• 2001

Spherical indentation technique was developed to evaluate the flow properties of metallic materials in carbon steel, stainless steel and alloys, etc. Through the spherical indentation test, differently degraded 1Cr-1Mo-0.25V steel's mechanical properties were observed and compared with conventional standard test data. The flow properties of 1Cr-1Mo-0.25V steels were estimated by analyzing the indentation load-depth curve. To characterize the flow property, we used material yield slope and constraint factor index rather than strain-hardening exponent because the variation of strain-hardening exponent was very little and the data showed irregularly. And the constraint factor's effect was small when the material yield slope was taken into account.

• 대한기계학회논문집A
• /
• 제39권11호
• /
• pp.1079-1089
• /
• 2015

본 연구에서는 항복강도 1GPa 이상의 고강도재료에 대해 구형압입자를 이용한 물성평가법을 제시한다. 압입전산모사를 통해 하중-변위 관계를 응력-변형률 관계로 변환하는 네 압입변수에 대한 회귀식을 바탕으로, 고강도 물성평가용 프로그램을 작성했다. 이를 압입시험에 적용하면 단 한번의 하중-해중에서 얻어지는 데이터로 유효 응력-변형률곡선을 얻을 수 있다. 광범위한 재료들에 대해 구해진 물성치의 평균오차는 영률 0.3%, 항복강도 0.8 %, 변형경화지수 6.4 % 이내이다.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.17-22
• /
• 2003

This paper presents a new circular curve fitting approach of articulated manipulators, based on least square. The approach aims at gaining the interpolation of circle from n data points, under the condition that the fitted circle should pass both a starting point and an ending point. First a spherical fitting should be performed, using least squares. Then the circular curve fitting can be resulted from the intersection of the fitted sphere and the plane obtained from 3 points, i. e., a starting point, an ending point and the center of a sphere. The proposed algorithms are shown to be efficient by using MATLAB-based simulation.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.461-471
• /
• 2007

In this work, indentation theory of Lee $et al.^{(1)}$ for 6% indentation of indenter diameter is extended to an indentation theory for 20% indentation. For shallow indentation, the effect of friction on load-depth curve is negligible, but different materials can show nearly identical load-depth curves. On the basis of this observation, a new numerical approach to deep indentation techniques is proposed by examining the finite element solutions. With this new approach, from the load-depth curve, we obtain stress-strain curve and the values of Young's modulus, yield strength and strain-hardening exponent with an average error of less than 3%.

• 천문학회보
• /
• 제41권2호
• /
• pp.40.2-40.2
• /
• 2016

The attenuation of starlight by dust in galactic environments is investigated through models of radiative transfer in a spherical, clumpy interstellar medium (ISM). We show that the attenuation curves are primarily determined by the wavelength dependence of absorption rather than by the underlying extinction (absorption+scattering) curve; the observationally derived attenuation curves cannot constrain a unique extinction curve unless the absorption or scattering efficiency is specified. Attenuation curves consistent with the Calzetti curve are found by assuming the silicate-carbonaceous dust model for the Milky Way (MW), but with the $2175{\AA}$ bump suppressed or absent. The discrepancy between our results and previous work that claimed the Small Magellanic Cloud dust to be the origin of the Calzetti curve is ascribed to the difference in adopted albedos; we use the theoretically calculated albedos whereas the previous ones adopted empirically derived albedos from observations of reflection nebulae. It is found that the model attenuation curves calculated with the MW dust are well represented by a modified Calzetti curve with a varying slope and UV bump strength. The strong correlation between the slope and UV bump strength, as found in star-forming galaxies at 0.5 < z < 2.0, is well reproduced if the abundance of the UV bump carriers is assumed to be 30-40% of that of the MW-dust; radiative transfer effects lead to shallower attenuation curves with weaker UV bumps as the ISM is more clumpy and dustier. We also argue that some of local starburst galaxies have a UV bump in their attenuation curves, albeit very weak.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1681-1688
• /
• 2019

In accordance with ASME Boiler and Pressure Vessel (B&PV) Code Sec.XI Appendix. G, a postulated crack is located at the beltline of a reactor pressure vessel because the neutron flux at the beltline is higher than elsewhere. This means that the distance between the core and the semi-spherical bottom head is longer than the distance between the core and the cylindrical beltline. However, several Small and Medium sized Reactors have bottom heads with diverse shapes, including dished or semi-elliptical shapes, to satisfy the requirement and performance. So, the aim of this paper is to evaluate the effect of crack location on Pressure-Temperature limit curve. To do this, two types of postulated crack location, such as beltline and semi-elliptical bottom head, were adopted to derive the Pressure-Temperature limit curve. Also, parametric studies for neutron flux, crack shape and so on were performed. As a result, core critical temperature of semi-elliptical bottom head is found to higher than that of beltline even when they have same values of thickness and neutron flux. This result will be useful to enhance the understanding of Pressure-Temperature limit curve.

• 한국항행학회논문지
• /
• 제16권5호
• /
• pp.731-737
• /
• 2012

새로운 개념의 인공위성 자세제어 작동기에 대한 타당성 연구를 수행하였다. 구체구동기는 단일장치로써 위성의 3축 자세제어가 가능한 구동기이며, 구체 플라이휠과 자기부상 및 회전구동을 위한 전자석으로 구성된다. 구체구동기에 대한 수학적 모델링 및 설계를 통하여 시제품을 제작하였으며, 자기부상이 적용된 조건에서 1축에 대한 구동성능 시험을 수행하였다. 구동성능은 최대속도 7,200rpm 그리고 최대토크 0.7Nm로 측정되었으며, 속도-토크 특성곡선을 이용한 개루프 속도제어를 통하여 우수한 가속 및 감속 속도제어 결과를 확인하였다. 본 구체구동기는 속도 및 토크 제어를 위한 추가적인 연구를 통하여 성능이 개선될 예정이다.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.137-149
• /
• 2023

In this study, to explore the working performance of the CFST split spherical node wind power tower, two groups of CFST split spherical joint plane towers with different web wall thicknesses and a set of space systems were analyzed. The tower was subjected to a low-cycle repeated load test, and the hysteresis and skeleton curves were analyzed. ABAQUS finite element simulation was used for verification and comparison, and on this basis parameter expansion analysis was carried out. The results show that the failure mode of the wind power tower was divided into weld tear damage between belly bar, high strength bolt thread damage and belly rod flexion damage. In addition, increasing the wall thickness of the web member could render the hysteresis curve fuller. Finally, the bearing capacity of the separated spherical node wind power tower was high, but its plastic deformation ability was poor. The ultimate bearing capacity and ductility coefficient of the simulated specimens are positively correlated with web diameter ratio and web column stiffness ratio. When the diameter ratio of the web member was greater than 0.13, or the stiffness ratio γ of the web member to the column was greater than 0.022, the increase of the ultimate bearing capacity and ductility coefficient decreased significantly. In order to maximize the overall mechanical performance of the tower and improve its economy, it was suggested that the diameter ratio of the ventral rod be 0.11-0.13, while the stiffness ratio γ should be 0.02-0.022.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.502-514
• /
• 1998

The purpose of this study is to observe the corrosion characteristcs of four dental amalgams(CAULK FINE CUT, CAULK SPHERICAL, DISPERSALLOY, TYTIN) and to determine a function of chloride concentration through the anodic polarization curve obtained by using a potentiostat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylinderical metal mold, and condensed by hydrolic pressure. Each specimen was removed from the metal mold. 24 hours after condensation, specimens were polished with the emery paper and stored at room temperature for 6 months. The anodic polarization curves were employed to compare the corrosion behaviours of the amalgam m KCl and KCl-NaCl solution, which had chlonde concentration of 0.4 g/l, 0.8 g/l, 1.2 gil, and 1.6 gil at $37^{\circ}C$ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 1 hour, the potential scan was begun. The potential scan range was - 1500mV ~+800mV(vs. S.C.E.) in the working electrode and the scan rate was 50mV/sec. The results were as follows, 1. The corrosion potential. the potential of anodic current peak, and transpassive potential in the solution of high chloride concentration shifted to more cathodic direction than those in the solution of low concentration, and the current density in the solution of high chloride concentration was higher than that in the solution of low concentration. 2. The corrosion potential, the potential of anodic current peak, and transpassive potential for CAULK FINE CUT amalgam were the most cathodic among the others, and the current density were the highest among the others. 3. In the solution of low chloride concentration, the corrosion potential, the potential of anodic current peak, and transpassive potential for DISPERSALLOY were the most anodic among the others, however in the solution of high chloride concentration, those for TYTIN were the most anodic among the others. 4. The anodic polarization curve for CAULK SPHERICAL was similar to that for high copper amalgams.