• Geomechanics and Engineering
• /
• 제28권4호
• /
• pp.405-419
• /
• 2022

Cavity expansion and contraction solutions for cylindrical and spherical cavities in unsaturated residual soils are presented in this paper. Varying soil state in the plastic zone is accounted by a numerical approach, wherein an element-by-element discretization of the plastic zone of both expanding and contracting cavities is carried out. Unlike existing methods utilizing self-similarity technique, the solution procedure enables the prediction of entire soil-state at any stage of expansion and subsequent contraction. It is also applicable for both cavity creation and expansion problems. The approach adopts constant contribution of suction to effective stress (constant X^s drainage condition) for analysis. The analysis procedure is validated by interpreting the previously reported pressuremeter test results in lateritic residual soil. The typical cavity expansion and contraction characteristics of unsaturated Indian lateritic soil were then examined using this solution procedure. The effect of initial soil-state on cavity limit pressure, plastic radius, reverse yield pressure, and reverse plastic radius are also presented.

• Journal of Radiation Protection and Research
• /
• 제1권1호
• /
• pp.10-14
• /
• 1976

공동(空洞)크기가 LiF 열형광선량계(熱螢光線量計)의 감응(感應)에 미치는 영향(影響)을 포리에틸렌 매질내(媒質內)에 삽입(揷入)한 구형(球型) 열형광선량계공동(熱螢光線量計空洞)의 가상계(假想系)에서 이론적(理論的)로 연구(硏究)하였다. 크기가 다른 반경(半徑)을 가진 구형공동(球型空洞)의 감응(感應)은 최근(最近)의 공동이론(空洞理論)을 適用(적용)하여 입사광자(入射光子) 에너지의 함수(函數)로서 계산(計算)하였다. 그반경(半徑)은 1.578mm에서 6.528mm까지 취하였고 입사광자(入射光子)에너지는 0.02MeV에서 0.3Mev까지의 범위를 택하였다. 결과(結果)로서 매질내(媒質內)에 삽입(揷入)한 공동(空洞)으로서의 LiF 열형광선량계(熱螢光線量計)의 감응(感應)은 입사광자(入射光子)의 에너지는 물론 선량계(線量計) 자체(自體)크기의 함수(函數)라는 것을 발견(發見)하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.215-222
• /
• 2001

Uncertainty study of shear strength characteristics of the marine clays was carried out based ell In-situ tests and laboratory tests on tile south-east coastal region of the Korean peninsula. Theoretical analyses were studied using both tile spherical cavity expansion theory in finite soil mass and the strain path method to determine tile cone factor using the undrained shear strengths obtained by in-situ tests, and the empirical methods in accordance with the ultimate resistance theory were also discussed. Analysis show that the empirical methods suggest more reasonable value than that of theoretical methods in terms of comparing the cone factor estimated using linear regression and frequency distribution analyses. The cone factors obtained by the empirical methods are 18, 15, and 6 respectively, from the results of total cone resistance, effective cone resistance, and excess porewater cone resistance method, and the estimated were similar to those of previous researcher's.

• Advances in aircraft and spacecraft science
• /
• 제9권2호
• /
• pp.95-102
• /
• 2022

The paper investigates the process of pulsation of a spherical cavity (bubble) in a liquid under the influence of a source of ultrasonic vibrations. The process of pulsation of a cavitation pocket in liquid is investigated. The Kirkwood-Bethe model was used to describe the motion. A numerical solution algorithm based on the Runge-Kutta-Felberg method of 4-5th order with adaptive selection of the integration step has been developed and implemented. It was revealed that if the initial bubble radius exceeds a certain value, then the bubble will perform several pulsations until the moment of collapse. The same applies to the case of exceeding the amplitude of ultrasonic vibrations of a certain value. The proposed algorithm makes it possible to fully describe the process of cavitation pulsations, to carry out comprehensive parametric studies and to evaluate the influence of various process parameters on the intensity of cavitation.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.36-37
• /
• 2002

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1080-1084
• /
• 2001

In manufacturing a micro die with half spherical cavity by MEDM, it is necessary to prepare an electrode with the same shape. This paper suggests a simple method to manufacture a half spherical electrode based on tool wear. The tool wears more rapidly at the edge of a cylindrical electrode. In order to make a half spherical micro electrode, cylindrical electrode was fed into the workpiece by the distance of its radius. The d/R(depth/Radius) value varied with respect to capacitance and electrode diameter. The smaller the size of electrode was, the closer the electrode tip geometry approached to a half sphere.

• Geomechanics and Engineering
• /
• 제19권2호
• /
• pp.141-151
• /
• 2019

A novel theoretical solution is presented for created (zero initial radius) cavity expansion problem based on CamClay model and considers the effect of initial anisotropic in-situ stress and drained conditions. Here the strain of this theoretical solution is small deformation in elastic region and large deformation in plastic region. The works for cylindrical and spherical cavities expanding in drained condition from zero initial radius are investigated. Most of the conventional solutions were based on the isotropic and undrained condition, however, the initial stress state of natural soil mass is anisotropy by soil deposition history, and drained cavity expansion calculation is closer to actual engineering in permeable soil mass. Finally, the parametric study is presented in order to the engineering significance of this work.

• Structural Engineering and Mechanics
• /
• 제35권4호
• /
• pp.409-430
• /
• 2010

The present paper will be concerned to the investigation of the stress-strain field around the cavity that is loaded or partially loaded at the inner surface by the rotationally symmetric loading. The cavity of the spherical, cylindrical or elliptical shape is situated in a stressed elastic continuum, subjected to the gravitation field. As the contribution to the similar investigations, the paper introduces the new function of loading in the form of the infinite sine series. Besides, in this paper the solution of stresses around an oblong ellipsoid cavity, has been obtained using appropriate curvilinear elliptical coordinates. This analytical approach avoids the solutions of the same problem that lead to expressions that contain rather complex integrations. Thus the presented solutions provide the applicable and explicit expressions for stresses and strains developed in infinite series with easily determinable coefficients by the use of contemporary mathematical packages. The numerical examples are also included to confirm the convergence of the obtained solutions.

• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.83-90
• /
• 2011

There are two main types of concentrating optical systems in use today: refractive types that use Fresnel lenses, and reflective systems that use one or more mirrors. Regardless of the chosen optical system, the result is concentrated sunlight being aimed at the sensitive face of the cell, to produce more energy from less photovoltaic material. In this paper, for the achieve trackerless CPV system, CPV module included that the spherical lens with reflect mirror makes it possible to achieve high and stable power generation performance for the high concentration photovoltaic power generation system and cope with the needs for a variety of shapes and sizes in flexible manners and that the multiple cavity assemble method greatly reduces costs. Development of these high performance multi-junction CPV module promises to accelerate growth in photovoltaic power generation.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.162-163
• /
• 2003