• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.657-663
• /
• 2012

The spherical mesoporous silica is synthesized and incorporated with CdSe/ZnS quantum dots(QDs) for preparing micro beads to detect toxic and bio-materials with high sensitivity. The spherical silica beads with the brunauer-emmett-telle(BET) average pore size of 15 nm were prepared with a ratio 1, 3, 5-trimethylbenzen, as a swelling agent, to the block-copolymer template surfactant of over 1 and under vigorous mixing condition. The surface of spherical mesoporous silica is modified using octadecylsilane for incorporating QDs. Based on photoluminescence(PL) spectra, the relative brightness of mesoporous silica beads incorporated with 10 nM of QDs is 79,000 times brighter than that of Rodamine 6 G.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2281-2284
• /
• 2014

Polystyrene beads (PS beads) with narrow size distribution were synthesized, and their diameter was controlled from 1.2 to $5{\mu}m$ by varying the injection rate of a styrene solution containing initiator and the concentration of reactant, such as initiator and capping material. The diameter of the PS beads increased with increasing in the injection rates and the initiator concentration or decreasing the capping material concentration. Then, we used the PS beads as building block, and organized them into a hexagonally close-packed monolayer on substrate with template-assisted manual assembly. We showed perfect hexagonally close-packed organization of the PS beads with various sizes in large-scale area. And we demonstrated the superiority of the dry manual assembly over the wet self-assembly in terms of simplicity, speed, perfect ordering, and large scale.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1159-1164
• /
• 2003

Two processing routes (i.e., the gel casting and polymer preform routes) using polymer beads were studied to fabricate porous ceramics with a cellular structure. The gel casting route, comprising the gel casting of a ceramic slurry mixed with polymer beads, was found to be inadequate to produce porous ceramic bodies with a interconnected pore structure, due to complete coating of the slurry on the polymer beads, which left just isolated pores in the final sintered bodies. The polymer preform route, involving the infiltration of a polymer beads preform with the ceramic slurry, successfully produced porous ceramics with a highly interconnected network of spherical pores. The pore size of 250-300 $\mu\textrm{m}$ was demonstrated and the porosity ranged from 82 to 86%. This process is advantageous to control the pore size because it is determined by the sizes of polymer beads used. Another feature is the avoidance of hollow skeleton, giving a high strength.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.13-17
• /
• 2016

It is highlighted that increasing the adsorbent surface area on volumetric basis is very important in providing an easy access for gas molecules. Fine particles around $3{\mu}m$ of soft-burned dolomite kiln dust (SB-DKD) were hydrated to wet slurry samples by ball mill process and then placed in a chamber to use spray dryer method. Spherical granules with particle size distribution of $50{\sim}60{\mu}m$ were prepared under the experimental condition with or without addition of a pore-forming agent. The relationship between bead size of the pore-forming agent and size of SB-DKD particles is the most significant factor in preparation of spherical granules with a high porosity. Whereas addition of smaller beads than SB-DKD resulted in almost no change in the surface porosity of spherical granules, addition of larger beads than SB-DKD contributed to obtaining of the particles with both 15 times larger average pore volume and 1 order of magnitude larger porosity. It is considered that spherical granules with improved $N_2$ gas adsorption ability may also be utilized for other atmospheric gas adsorption.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.28 no.2
• /
• pp.66-70
• /
• 2014

In order to the feasibility of silk materials as protein delivery system, silk beads incorporated with bovine serum albumin (BSA) were prepared by dropping silk fibroin extract into dope solution composed of ethanol and dichloromethane. Structural and morphological characteristics of silk beads were examined using scanning electron microscopy (SEM), infrared spectrometry, and X-ray diffractometry. Swelling ratio of silk beads was also measured. Release behavior of prototypical protein, BSA, was studied by observing the electropheretic phenomenon and release profile. SEM showed that silk beads are spherical with porous interior structure. Infrared spectrometry and X-ray diffraction confirm that the silk beads have a ${\beta}$-sheet conformation. The swelling capability of silk beads increased with the incorporation of the protein. The protein was released from the beads with slow release following an initial burst release. Therefore, silk beads show promise as materials for encasing protein drugs to be delivered to targets in the human body.

• Membrane Journal
• /
• v.28 no.1
• /
• pp.62-66
• /
• 2018

In this study the cleaning spherical beads with same density as water were fabricated. Bead moving velocity was measured with respect to the aeration rate and bead concentration in water reservoir. The permeation experiments for FR (filtration and relaxation) and SFCO (sinusoidal filtration continuous operation) modes were simultaneously carried out under the condition of 1 to 3% cleaning spherical bead concentration, 20 LMH and 500 mL/min aeration rate in the MLSS 8,000 mg/L activated sludge solution. The used membrane was the $90cm^2$ effective area and $0.4{\mu}m$ nominal pore size flat membrane. The TMP (transmembrane pressure) decreased as the bead concentration increased, and was shown most effective in FR mode with 2% bead concentration.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.15 no.2
• /
• pp.171-174
• /
• 2007

Sericin beads were prepared from ethanol-precipitated sericin. The addition of ethanol into hot-water extracted sericin solution induced precipitation of sericin and thereby some sericin could be fractionated. The ethanol-precipitated sericin (EpSS) had narrower molecular weight distribution than original sericin. The EpSS had mainly random coil structure with small portion of ${\beta}-sheet$ structure. With the EpSS, spherical beads could be prepared at lower concentration than with original sericin due to higher viscosity. The EpSS beads had better compressive strength than the original sericin beads and had rubber-like property. Our results suggest that EpSS is more compatible in the polymeric field, since it has better mechanical strength than original sericin.

• Journal of Environmental Science International
• /
• v.27 no.12
• /
• pp.1215-1226
• /
• 2018

In this study, PAN-SZ (polyacrylonitrile scoria zeolite) beads were prepared by immobilizing Na-A zeolite (SZ-A) synthesized from Jeju volcanic rocks (scoria) on the polymer PAN. FT-IR and TGA analysis results confirmed that the SZ-A was immobilized in the PAN-SZ beads. SEM images showed that the PAN-SZ beads are a spherical shape with 2 mm diameter and exhibit a porous inner structure inside the bead. The most suitable mixing ratio of PAN to SZ-A as the adsorbent for removing Sr ions was PAN/SZ-A = 0.2 g/0.3 g. The adsorption kinetic data for Cu and Sr ions were fitted well with the pseudo-second-order model. The Cu and Sr ion uptakes followed a Langmuir isotherm model and the maximum adsorption capacities at $20^{\circ}C$ were 84.03 mg/g and 75.19 mg/g, respectively. The amount of Sr ion adsorbed by SZ-A on the PAN-SZ beads was about 160 mg/g, which was similar to that adsorbed by SZ-A powder. Thus, the PAN-SZ beads prepared in this study are considered to be effective adsorbents for removing metal ions in aqueous solutions.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.6
• /
• pp.402-409
• /
• 2001

Different bioligands carrying synthetic adsorbents have been reported in the literature for protein separation, We have developed a novel and new approach to obtain high protein ad-sorption capacity utilizing 2-methacrylamidohistidine(MAH) as a bioligand. MAH was synthe-sized by reacting methacrylocholride and histidine, Spherical beads with an average size of 150-200㎛ were obtained by the radical suspension polymerization of MAH and 2-hydrosyethyl-methacrylate(HEMA) conducted in an aqueous dispersion medium. p(HEMA-co-MAH) beads had a specific surface area of 17.6㎡/g . Synthesized MAH monomer was characterized by NMR. p(HEMA-co-MAH) beads were characterized by swelling test, FTIR and elemental analysis. Then Cu(II) ions were incorporated onto the beads and Cu(II) loading was found to be 0.96 mmol/g.These affinity beads with a swelling ration of 65% and containing, 1.6 mmol MAH/g were used in the adsorption/desorption of human serum albumin(HSA) from both aqueous solutions and hu-man serum. The adsorption of HSA onto p(HEM-co-MAH) was low(8.8 mg/g). Cu(II) chelation onto the beads significantly increased the HSA adsorption (56.3 mg/g). The maximum HSA ad-sorption ws observed at pH 8.0 Higher HSA adsorption was observed from human plasma(94.6 mgHSA/g) Adsorption of other serum proteins were obtained as 3.7 mg/g for fibrinogen and 8.5mg/g for γ-globulin. The total protein adsorption was determined as 107.1mg/g. Desorption of HSA was obtained using 0.1 M Tris/HCl buffer containing 0.5 M NaSCN, High desorption rations(up to 98% of the adsorbed HSA) were observed. It was possible to reuse Cu(II) chelated-p(HEMA-co-MAH) beads without significant decreases in the adsorption capacities.

• Advances in Traditional Medicine
• /
• v.7 no.1
• /
• pp.79-84
• /
• 2007

Urease was immobilized with calcium alginate by entrapment method in the form of spherical beads and stored in Tris/acetate buffer (pH 7.3) at $4^{\circ}C$. Urease immobilized at different concentration of alginate beads (3%, 4% and 5%) showed higher apparent $K_{m}$ values than the soluble urease. Furthermore, $K_{m}$ has been shown to be corelated with effective diffusion coefficient (De) at different concentration of alginate gel. The present study showed that diffusion and reaction contribute to control the overall rate.