• 한국산업융합학회 논문집
• /
• 제17권4호
• /
• pp.211-216
• /
• 2014

In general, gantry robot is very useful handling of heavy objects. But rope-driven yard cranes must have a little of sway and skew motion because ropes are passive mechanical device. So many researches have been concentrated on anti-sway algorithm controlling trolley speed. These approaches require sway angle. But it is very difficult to know sway angle and its derivative. Therefore control algorithm of trolley speed is not practical in general. On the contrary, control strategy using auxiliary rope is very useful to sway control of yard crane because rope length is shorter than quay-side container cranes. In this paper, we derive equations of motion of trolley system which have anti-sway controller to use auxiliary rope. And we propose the control strategy and analyse the behavior of the proposed system.

• 시스템엔지니어링학술지
• /
• 제2권2호
• /
• pp.45-50
• /
• 2006

Tilting technology is to tilt the train on the curve in order to minimize centrifugal force to passengers and to improve the speed within the limits of passenger's comfort and safety. According to reports from other countries, there is 15~30% speed improvement compared to the conventional trains. Recently, the advent of World-Wide-Web(WWW) and the explosive popularity of the Internet gave birth to collaborative applications which were enabled by computers and networks as their primary media. The progress of 3D computer graphics enabled collaborative applications with 3D virtual environments or distributed virtual environments. In this paper, we explain our implementation of the Share collaboration engine which is for collaboration applications based on a distributed virtual environment. The Share collaboration engine proposes a new Share network architecture for management of participants, and it provides some synchronization methods for 3D objects in virtual collaboration. TTX_PDM is an experimental application that tries to prevent wastes of human, material and time resources in networked virtual collaboration.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.3092-3107
• /
• 2019

Visible-infrared image fusion is a process of synthesizing an infrared image and a visible image into a fused image. This process synthesizes the complementary advantages of both images. The infrared image is able to capture a target object in dark or foggy environments. However, the utility of the infrared image is hindered by the blurry appearance of objects. On the other hand, the visible image clearly shows an object under normal lighting conditions, but it is not ideal in dark or foggy environments. In this paper, we propose a multi-guided filter and a real-time image fusion method. The proposed multi-guided filter is a modification of the guided filter for multiple guidance images. Using this filter, we propose a real-time image fusion method. The speed of the proposed fusion method is much faster than that of conventional image fusion methods. In an experiment, we compare the proposed method and the conventional methods in terms of quantity, quality, fusing speed, and flickering artifacts. The proposed method synthesizes 57.93 frames per second for an image size of $320{\times}270$. Based on our experiments, we confirmed that the proposed method is able to perform real-time processing. In addition, the proposed method synthesizes flicker-free video.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.72-75
• /
• 2005

Uncertainty of objects in Moving Object Database is a coherent property. It has been discussed in a lot of researches on modelling and query processing. The previous studies assume that uncertain future time is determined through utilizing recent speed and direction of vehicles. This method is simple and useful for estimating the time of the near future location. However, it is not appropriate when we estimate the time of the far future location. Therefore, in this paper, we propose a concept of planned route. It is used to estimate uncertain future time, which has to be located at a given point. If the route of an object is planned beforehand its locations are uncertainly distributed near that route. By a simple projection operation, the probability that a location lies in the planned route is increased. Moreover, we identify the future time of an object based on the speed for passing the route, which is offered via a website.

• 대한전자공학회논문지SP
• /
• 제48권2호
• /
• pp.88-95
• /
• 2011

스테레오 매칭은 두 영상의 차이를 이용하여 거리를 추정하는 연구 분야로 성능 개선과 함께 처리속도 향상을 위한 연구가 계속되고 있다. 본 논문에서는 계층적 Belief Propagation(BP) 알고리즘을 개선하여 기존의 BP에서의 수렴구간을 메시지 맵으로 만들고 이를 이용하여 처리속도를 향상시키는 Plane-converging BP 알고리즘을 제안한다. 또한 GPU 아키텍쳐인 Nvidia의 CUDA를 이용하여 다수의 계산을 병렬화 하고 이를 동시에 처리하여 실시간 어플리케이션에 적합한 스테레오 매칭 기법을 개발하였다. Plane-converging BP 알고리즘은 기존의 계층적 BP 알고리즘과 유사한 에러율을 가지면서 약 2.7배의 속도 향상을 이루었다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.103-111
• /
• 2021

Among transport vehicles, Special Vehicles (SVs) are seriously exposed to energy and environmental problems. In particular, elevator cars used when moving objects in high-rise buildings increase the engine's rotational speed (radian per second: RPM). At this time, when the vehicle accelerates rapidly while idling, energy consumption increases explosively along with the engine speed, and a lot of soot is generated. The purpose of this paper is to develop a bi-directional DC-DC converter for control of vehicle power and secondary battery used in an elevated ladder vehicle (EC) used in the moving industry. As a result of this paper, the performance test of the converter was conducted. The charging/discharging state of the converter was simulated using DC power supply and DC electronic load, and a performance experiment was conducted to measure the input/output power of the converter through a power meter. Through this experimental result, it was confirmed that the efficiency was more than 92% in Buck mode and Boost mode at maximum 1.2kW output.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.65-70
• /
• 2022

Lane change in urban environments is a challenge for both human-driving and automated driving due to their complexity and non-linearity. With the recent development of deep-learning, the use of the RNN network, which uses time series data, has become the mainstream in this field. Many researches using RNN show high accuracy in highway environments, but still do not for urban environments where the surrounding situation is complex and rapidly changing. Therefore, this paper proposes a lane change possibility decision network by adopting Attention layer, which is an SOTA in the field of seq2seq. By weighting each time step within a given time horizon, the context of the road situation is more human-like. A total 7D vectors of x, y distances and longitudinal relative speed of side front and rear vehicles, and longitudinal speed of ego vehicle were used as input. A total 5,614 expert data of 4,098 yield cases and 1,516 non-yield cases were used for training, and the performance of this network was tested through 1,817 data. Our network achieves 99.641% of test accuracy, which is about 4% higher than a network using only LSTM in an urban environment. Furthermore, it shows robust behavior to false-positive or true-negative objects.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.833-836
• /
• 2013

본 논문에서는 지속적으로 수집하는 영상장치의 영상을 이용하여 차량의 과속을 판별할 수 있는 지능형 단속시스템을 제안한다. 영상장비는 지속적으로 영상을 포착하게 되며, 수집된 전 후 영상을 비교하여 자연적, 장거리의 물체이동 등으로 발생하는 영상오류를 필터링하게 된다. 사물의 크기를 측정하여 픽셀처리를 이용하여 픽셀이 커지는 량에 따라 차량의 속도를 측정할 수 있음을 증명한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.299-303
• /
• 2003

This paper deals with the frequency sensing methods at HVDC system. The objects of frequency information in HVDC system areto fire a valve and to control a frequency of AC network. Conventionally, there are two methods to measure a frequency of AC network. The first method is to draw out from the synchronous machine and the second method is from AC network. Two methods have advantages and disadvantage each other. For the extreme case of a receiving system of zero inertia (no generation), synchronous machine is essential. In this situation, the frequency information received from the synchronous machine shaft. However, the speed of synchronous machine is oscillated when a disturbance in AC network occurs, and HVDC may be oscillated due to an oscillation speed. To solve this drawback, in this paper, new frequency sensing method is proposed. A proposed method that is use a modified curve-fitting algorithm, has a robust characteristics against a harmonics and unbalanced faults. Consequently, A proposed method is verified by PSCAD/EMTDC Program and experimental test.

• 천문학논총
• /
• 제28권1호
• /
• pp.1-6
• /
• 2013

Real-time data reduction pipeline for the Korea Microlensing Telescope Network (KMTNet) was developed by Korea Astronomy and Space Science Institute (KASI). The main goal of the data reduction pipeline is to find variable objects and to record their light variation from the large amount of observation data of about 200 GB per night per site. To achieve the goal we adopt three strategic implementations: precision pointing of telescope using the cross correlation correction for target fields, realtime data transferring using kernel-level file handling and high speed network, and segment data processing architecture using the Sun-Grid engine. We tested performance of the pipeline using simulated data which represent the similar circumstance to CTIO (Cerro Tololo Inter-American Observatory), and we have found that it takes about eight hours for whole processing of one-night data. Therefore we conclude that the pipeline works without problem in real-time if the network speed is high enough, e.g., as high as in CTIO.