• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11B
• /
• pp.1038-1049
• /
• 2003

Exactly measuring traffic load is the basis for efficient traffic engineering. However, precise traffic measurement involves inspecting every packet traversing a lint resulting in significant overhead on routers with high-speed links. Sampling techniques are proposed as an alternative way to reduce the measurement overhead. But, since sampling inevitably accompany with error, there should be a way to control, or at least limit, the error for traffic engineering applications to work correctly. In this paper, we address the problem of bounding sampling error within a pre-specified tolerance level. We derive a relationship between the number of samples, the accuracy of estimation and the squared coefficient of variation of packet size distribution. Based on this relationship, we propose an adaptive random sampling technique that determines the minimum sampling probability adaptively according to traffic dynamics. Using real network traffic traces, we show that the proposed adaptive random sampling technique indeed produces the desired accuracy, while also yielding significant reduction in the amount of traffic samples.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.4
• /
• pp.468-477
• /
• 2007

The DTC of voltage source inverter-fed PMSMs is based on hysteresis controllers of torque and flux. It has several advantages, namely, elimination of the mandatory rotor position sensor, less computation time, and rapid torque response. In addition, the stator resistance is the only parameter, which should be known, and no reference frame transformation is required. The DTC theory has achieved great success in the control of induction motors. However, for the control of PMSM drives proposed a few years ago, there are many basic theoretical problems that must be clarified. This paper describes an investigation into the effect of the zero voltage space vectors in the DTC system and points out that if using it rationally, not only can the DTC of the PMSM drive be driven successfully, but torque and flux ripples are reduced and overall performance of the system is improved. The implementation of DTC in PMSM drives is described and the switching tables specific for an interior PMSM are derived. The conventional eight voltage-vector switching table, which is namely used in the DTC of induction motors does not seem to regulate the torque and stator flux in a PMSM well when the motor operates at low speed. Modelling and simulation studies have both revealed that a six voltage-vector switching table is more appropriate for PMSM drives at low speed. In addition, the sources of difficulties, namely, the error in the detection of the initial rotor position, the variation of stator resistance, and the offsets in measurements are analysed and discussed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.499-508
• /
• 2023

In this paper, we propose a technique to estimate the coordinates of feature points existing on a 2D planar object in the three dimensional space. The proposed method detects multiple 3D features from the image, and excludes those which are not located on the plane. The proposed technique estimates the planar homography between the planar object in the 3D space and the camera image plane, and computes back-projection error of each feature point on the planar object. Then any feature points which have large error is considered as off-plane points and are excluded from the feature estimation phase. The proposed method is archived on the basis of the planar homography without any additional sensors or optimization algorithms. In the expretiments, it was confirmed that the speed of the proposed method is more than 40 frames per second. In addition, compared to the RGB-D camera, there was no significant difference in processing speed, and it was verified that the frame rate was unaffected even in the situation that the number of detected feature points continuously increased.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.48-55
• /
• 1997

An adaptive output feedback controller is designed for tracking control of an n-link robot manipulator with unknown load. High-gain obwserver that is used to estimate joint velocities is designed to avoide the restriction of the allowable variation range of unknown parmeters as well as improve the state estimation error. We saturate the control inut outside a domain of interest and use an adaptive law with a parameter projection feature to guarantee boundedness of all the trajectories in the closed-loop system. Simulation resutls on a 2-link manipulator illustrate that when the speed of the high-gain observer is sufficiently high, the proposed controller recovers the performance under state feedback control.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.3-5
• /
• 1996

A sensorless drive of induction motor has several advantage: low cost and availability in a harsh environment. Most of sensorless control schemes are based on the direct estimation of rotor speed from state observer. This study proposes a new sensorless control scheme. The proposed scheme is based on a reference model control which the error between the model and plant outputs decays to zero as time proceeds. The actuating signal is calculated from the fuzzy controller which increases the system stability and robustness. The simulation results indicate a good dynamic performance.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2262-2270
• /
• 2015

Generally, internal parameters of the motors and generators can be divided to the resistance and inductance components. They can become a cause of the changing internal parameters because they have sensitive characteristics due to external conditions. The changed parameters can generate the outputs which include error values from the speed and current controllers. Also, it can bring the temperature increase and mechanical damage to the system. Therefore, internal parameters of the motors and generators need to obtain their values according to the external conditions because it can prevent the mechanical damage caused by the changed parameters. In this paper, the off-line parameter identification method is verified using the Goertzel algorithm. The motor used in the simulation and experiments is an interior permanent magnet synchronous motor (IPMSM), and the proposed algorithm is verified by the simulation and experimental results.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.107-113
• /
• 1997

In this paper, an interfacing method to control rehabilitation assitance system with bio-signal is proposed. Controlling with EMG signals method has certain advantage on signal-collecting, but has some drawbacks in the function resolution of EMG signals because data-processing process is not efficient. To improve function-resolution and to increase the efficiency of EMG signal interfacing with rehabilitation assistance system, Multi-layer Perception which is highly effective with static signal and hidden-Markov model for dynamic signal resolving are fused together. In proposed method. The direction and average speed of the rehabilitation assitance system are controlled by the trajectory control and estimation of the moving direction result from the fused model. From the experiment, proposed GMM and 2-level MLP hybrid-classifier yielded 8.6% perception-error rate, improving function resolution. New acceleration control method constructed with 3 nested linear filter produced continuous acceleration paths without the information of destination point. Thus, the mass output caused by non- continuous acceleration-deceleration was eliminated. In the simulation, the necessary calculation, in the case of multiplication, was reduced by 11.54%.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.4
• /
• pp.163-170
• /
• 2005

This paper deals with an improved fault location algorithm with compensation ground capacitance through distributed parameter for a long parallel T/L. For the purpose of fault locating algorithm non-influenced by source impedance and fault resistance, the loop method was used in the system modeling analysis. This algorithm uses a positive and negative sequence of the fault current for high accuracy of fault locating calculation. Power system model of 160km and 300km long parallel T/L was simulated using EMTP software. To evaluate of the proposed algorithm, we used the several different cases 64 sampled data per cycle. The test results show that the proposed algorithm was minimized the error factor and speed of fault location estimation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.19-28
• /
• 1998

This paper is concerned with the implementation of the equalization technique in a DCS 1800 system employing the soft-decision output Viterbi algorithm (SOVA), which makes the hardware complexity comparable to the hard decision MLSE and gives reliable performance. Also, the channel estimation technique with enhances the perfdormance of the soft-decision output equalizer is proposed, and the Viterbi decoder which operates effectively with the soft-decision output of the qualizer is implemented using the Very High Speed ICs Hardware Description Language (VHDL). From the simulation results, it is shown that the implemented Viterbi decoder operates effectively and the SOVA outperforms the hard-decision MLSE in terms of the frame erasure rate (FER) and bit error rate (BER).

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.35-37
• /
• 2007

Super resolution using stochastic approach which based on the Bayesian approach is to easy modeling for a priori knowledge. Generally, the Bayesian estimation is used when the posterior probability density function of the original image can be established. In this paper, we introduced the improved MAP algorithm based on Bayesian which is stochastic approach in spatial domain. And we presented the observation model between the HR images and LR images applied with MAP reconstruction method which is one of the major in the SR grid construction. Its test results, which are operation speed, chip size and output high resolution image Quality. are significantly improved.