1 |
A. R. Munoz and T. A. Lipo, “On-line Dead-Time Compensation Technique for Open-Loop PWM-VSI Drives,” IEEE Trans. Power Electron., vol. 14, no. 4, pp. 683-689, Jul. 1999.
DOI
|
2 |
M. Hinkkanen, T. Tuovinen, L. Harnefors, and J. Luomi, “A Combined Position and Stator-Resistance Observer for Salient PMSM Drives: Design and Stability Analysis,” IEEE Trans. Power Electron., vol. 27, no. 2, pp. 601-609, Feb. 2012.
DOI
|
3 |
Y. S. Han, J. S. Choi, and Y. S. Kim, “Sensorless PMSM Drive with a Sliding Mode Control Based Adaptive Speed and Stator Resistance Estimator,” IEEE Trans. Magn., vol. 36, no. 5, pp. 3588-3591, Sept. 2000.
DOI
|
4 |
S. Po-ngam and S. Sangwongwanich, “Stability and Dynamic Performance Improvement of Adaptive Full-Order Observer for Sensorless PMSM Drive,” IEEE Trans. Power Electron., vol. 27, no. 2, pp. 588-600, Feb. 2012.
DOI
|
5 |
I. Jeong, B. J. Hyon, and K. Nam, “Dynamic Modeling and Control for SPMSMs with Internal Turn Short Fault,” IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3495-3508, Jul. 2013.
DOI
|
6 |
H. W. Sim, J. S. Lee, and K. B. Lee, “On-line Parameter Estimation of Interior Permanent Magnet Synchronous Motor using an Extended Kalman Filter,” Journal of Electrical Engineering & Technology, vol. 9, no. 2, pp. 600-608, Mar. 2014.
DOI
|
7 |
H. W. Sim, J. S. Lee, and K. B. Lee, “A Simple Strategy for Sensorless Speed Control for an IPMSM During Startup and Over Wide Speed Range,” Journal of Electrical Engineering & Technology, vol. 9, no. 5, pp. 1582-1591, Sept. 2014.
DOI
|
8 |
J. S. Lee, H. G. Jeong, and K. B. Lee, “Active Damping for Wind Power Systems with LCL filters using a DFT,” Journal of Power Electron., vol. 12, no. 2, pp. 326-332, Mar. 2012.
DOI
|
9 |
N. Urasaki, T. Senjyu, and K. Uezato, “A Novel Calculation Method for Iron Loss Resistance Suitable in Modeling Permanent-Magnet Synchronous Motors,” IEEE Trans. Energy Conv., vol. 18, no. 1, pp. 41-47, Mar. 2003.
DOI
|
10 |
E. Jacobsen and R. Lyons, “The Sliding DFT,” IEEE Signal Process. Mag., vol. 20, no. 2, pp. 74-80, Mar. 2003.
|
11 |
A. Sarikhani and O. A. Mohammed, “Inter-Turn Fault Detection in PM Synchronous Machines by Physics-Based EMF Estimation,” in Proc. ECCE, pp. 1254-1261, Sep. 2012.
|
12 |
A. Proca and A. Keyhani, “Identification of Variable Frequency Induction Motor Models From Operating Data,” IEEE Trans. Energy Conv., vol. 17, no. 1, pp. 24-31, Mar. 2002.
DOI
|
13 |
L. Peretti and M. Zigliotto, “Automatic Procedure for Induction Motor Parameter Estimation at Standstill,” IET Electr. Power Appl., vol. 6, no. 4, pp. 214-224, Apr. 2012.
DOI
|
14 |
R. Kerkman, J. Thunes, T. Rowan, and D. Schlegel, “A Frequency-Based Determination of Transient Inductance and Rotor Resistance for Field Commissioning Purposes,” IEEE Trans. Ind. Appl., vol. 32, no. 3, pp. 577-584, May./Jun. 1996.
DOI
|
15 |
S. Morimoto, Y. Tong, Y. Takeda, and T. Hirasa, “Loss Minimization Control of Permanent Magnet Synchronous Motor Drives,” IEEE Trans. Ind. Electron., vol. 41, no. 5, pp. 511-517, Oct. 1994.
|
16 |
J. W. Choi and S. K. Sul, “Inverter Output Voltage Synthesis using Novel Dead Time Compensation,” IEEE Trans. Power Electron., vol. 11, no. 2, pp. 221-227, Mar. 1996.
DOI
|
17 |
S. Bolognani, L. Peretti, and M. Zigliotto, “Repetitive-Control-Based Self-Commissioning Procedure for Inverter Nonidealities Compensation,” IEEE Trans. Ind. Appl., vol. 44, no. 5, pp. 1587-1596, Sept./Oct. 2008.
DOI
|
18 |
J. K. Seok, S. I. Moon, and S. K. Sul, “Induction Machine Parameter Identification using PWM Inverter at Standstill,” IEEE Trans. Energy Conv., vol. 12, no. 2, pp. 127-132, Jun. 1997.
DOI
|
19 |
J. H. Kim, J. G. Kim, Y. H. Ji, Y. C. Jung, and C. Y. Won, “An Islanding Detection Method for a Grid-Connected System Based on the Goertzel Algorithm,” IEEE Trans. Power Electron., vol. 26, no. 4, pp. 1049-1055, Apr. 2011.
DOI
|