• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3650-3655
• /
• 2013

A state purpose to produce fine blanking die gets to be the maximum size of share surface the study considered that change a size of share area. the clearance affecting most greatly size of share surface fixing as 1% of material thickness and while change share speed, A distance change from share line to V-ring center, A change of V-ring angle. it designed. Each test specimen taken from the share surface size analysis of the V-ring distance of 2mm, the outer $45^{\circ}$ / inner$30^{\circ}$ if the, Shear speed was found that the area of the entire cross section is largest the 6.4m/min.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.43-57
• /
• 2003

This paper presents the air corridor planning strategy based on simulation with MUKLMO_3 (Micro-scale Urban Climate Model) to investigate the wind field and air corridor caused by the land-use change of the New Town Development Area in Pan-Gyo. In the first part, the most frequently observed wind field in the New Town Development Area was measured and used as an initial value to simulate a more realistic wind field and air corridor. Several experiments with different initial values of wind fields were carried out to investigate the wind field change affected by the New Town Development. The results show the features of the wind field of the neutral stability condition in the urban canopy layer with a high resolution near the ground. The wind speed is weakened at this level due to the New Town Development. It was found that the wind field and air corridor are influenced by the land-use change. After the development of the New Town, the speed of the wind field decreased and the main wind directions and air corridor changed. In this study, this model is found to be a useful tool for evaluating air corridor and change of wind field in speed and direction.

• Korean Management Science Review
• /
• v.26 no.2
• /
• pp.113-134
• /
• 2009

Rapid knowledge change, heightened competition. and shortened product life cycles are just a few of the constants faced by many buying firms in today's markets. Many buying firms have responded to these conditions by outsourcing non-core activities. The Quality and cost of a product or service offered in the market is a function, not only of the capabilities of the firm, but also of the network of suppliers who provide inputs to the firm. When a firm finds its suppliers lacking in performance it can help suppliers to develop their capabilities. There are three main goals for this study. The first goal is to identify the important factors that precede and influence firms' investment in knowledge transfer activities. The second goal is to investigate the relationship between knowledge transfer activities and the consequences of knowledge transfer activities. The last goal is to explore the effects of knowledge change speed. To analyze the validity of the research model and the hypotheses. the data are collected from 238 manufacturing firms through the administration of structured Questionnaires. The results of structural equation model analyses indicate that the model is generally valid and 11 of 14 hypotheses are supported by the data. Reasons for and implications of these observed relationships are discussed.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.189-190
• /
• 2017

For the concept design of the device, a tool was made to test the simulated fuel rods and cutting force and the cutting force was measured. When 2-CUT and 3-CUT modules were used, the maximum force in 2-CUT at 12.5 mm/s speed change was $197.5kg_f$ and the maximum force at 3-CUT was $363.2kg_f$. The change of force in 2-CUT rapidly increases from about 1 second, and you can see that there are increase and decrease of the force change from about 5 seconds to 18 seconds, and it was rapidly decreased and the cut was made. The force change in 3-CUT has higher force at about 5 seconds later than 2-CUT at the speed of 12.5 mm/s, and you can see that it has the same tendency afterwards. If you search for the force at adequate speed from this cutting force test, 2-CUT module requires less slitting force than 3-CUT module, and the cutting time for 250 mm at 12.5 mm/s was 21 seconds, which can cut 4 m fuel rod in 5 minutes. But, there are cases of not completely slitting with 2-CUT module, so it is necessary to supplement this in the future through experiments.

• Journal of The Korean Association For Science Education
• /
• v.15 no.2
• /
• pp.164-172
• /
• 1995

In this study, the researcher tried to find out the effect of using a computer interface in teaching speed concept in the elementary school. The 4th and 5th pupils were sampled for this study. The school is located in a sub-urban agricultural area in Korea. In the study, the subjects were divided into two groups: experimental and comparison group. From the pretest, two groups did not show any difference in the understanding of speed concept. The computer interface and the programs to operate the interface and data analysis were developed by researcher. The interface is a modular type and designed ready to connect to microcomputer. The test items were consisted of (1) comparison of speed, (2) change of motion, (3) acceleration, and (4) deceleration. As the result, the researcher found the following results: 1. In case of speed comparison, no significant difference was found between experimental and comparison group. 2. In case of change of motion, acceleration, and deceleration, the experimental groups showed higher achievement both in 4th grade and 5th grade. However, the 4th graders showed more learning than the 5th graders. In conclusion, this study showed that the use of computer interface seemed to be very effective in teaching and learning speed concept in elementary school.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.284-287
• /
• 2001

In this paper, we designed and implemented a precise pulse motor control chip that generates the parabolic speed pattern. This chip can control step motor[1], DC servo[2] and AC servo motors at high speed and precisely. It can reduce the mechanical vibration to the minimum at the change point of a degree of acceleration. Because the parabolic speed pattern has the continuous acceleration change. In this paper, we present the pulse generation algorithm and the parabolic pattern speed generation. We verify these algorithm using visual C++. We designed this chip with VHDL(Very High Speed Integrated Circuit Hardware Description Language) and executed a logic simulation and synthesis using Synopsys synthesis tool. We executed the pre-layout simulation and post-layout simulation with Verilog-XL simulation tool. This chip was produced with 100 pins, PQFP package by 0.35 um CMOS process and implemented by completely digital logic. We developed the hardware test board and test program using visual C++. We verify the performance of this chip by driving the servo motor and the function by GUI(Graphic User Interface) environment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.565-568
• /
• 2002

A lot of rotating machines are being used in the industrial world and electric motor and generator take the most part of it. When it comes to the electric motor and generator, we can not help thinking about the eddy current because it brings a loss of electric and can be a important reason of the heat generation. To attenuate eddy current. laminated silicon steel sheets are being used in general. Especially, laminated rotor is being used for rotating part of the electric motor and generator and it decreases electrical loss and heat generation but we can be faced with another problem. In general, most of the motor and generator can be normally operated under 3600rpm because they are designed to have the first critical speed more than that speed. But nowadays, they should be operated more than the first critical speed as usual with the trend of high speed. large scale and high precision in industrial world. The critical speed can be determined from the inertia and stiffness for the rotor and bearing of rotating systems. The laminated rotor stiffness can be hardly determined because it can be derived a lot factors for instance rotor material and shape. lamination material and shape. insulation material. lamination force and so on. In this paper, the change of the natural frequency of the motor was examined with the change of the lamination force as an experimental method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.61-67
• /
• 2013

In this paper, it was studied how the critical speed which could occur hot judder due to disk temperature. Through the dynamometer experiment, we measured the critical velocity and surface temperature when the hot judder occur on the disk break. Also with the critical velocity theory equation and the temperature change graph of factors which used in the equation, we was induced experiment equation including theory equation and experiment values. And it has compared with the method which approach as linea. From this, we predicted the change of critical speed which could occur hot judder due to disk temperature. In addition, critical speed graph has compared with actual driving speed and disc temperature at a vehicle test. Therefore it was estimate to possibility of arising hot judder.

• Wind and Structures
• /
• v.26 no.3
• /
• pp.129-146
• /
• 2018

Extreme wind speed analysis has been carried out conventionally by assuming the extreme series data is stationary. However, time-varying trends of the extreme wind speed series could be detected at many surface meteorological stations in China. Two main reasons, exposure change and climate change, were provided to explain the temporal trends of daily maximum wind speed and annual maximum wind speed series data, recorded at Hangzhou (China) meteorological station. After making a correction on wind speed series for time varying exposure, it is necessary to perform non-stationary statistical modeling on the corrected extreme wind speed data series in addition to the classical extreme value analysis. The generalized extreme value (GEV) distribution with time-dependent location and scale parameters was selected as a non-stationary model to describe the corrected extreme wind speed series. The obtained non-stationary extreme value models were then used to estimate the non-stationary extreme wind speed quantiles with various mean recurrence intervals (MRIs) considering changing climate, and compared to the corresponding stationary ones with various MRIs for the Hangzhou area in China. The results indicate that the non-stationary property or dependence of extreme wind speed data should be carefully evaluated and reflected in the determination of design wind speeds.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.217-228
• /
• 2009

Sections under the influence of merging in an uninterrupted facility create irregular interaction between vehicles, such as lane change, speed acceleration and deceleration because of the merging of ramp traffic flows which have traffic characteristics different from those of the main line. This causes a confused traffic flow phenomenon(turbulence), which is considered an unstable traffic characteristic between various continuous points in consideration of v conditions. In this study, in merge influence sections, detectors by lane-point were installed to create time and space-series -traffic data. The least significant difference(LSD), as the criteria for discriminating a significant speed change between points, was calculated to examine the turbulence. As a result, turbulence in merge influence section was found to change the zones of such occurrence and the seriousness levels according to traffic condition. Thus, the maximum merge influence section due to the turbulence was created in the traffic condition before congestion when traffic increases. According to characteristics of changes in speed, merge influence section was divided into upstream 100m$\sim$downstream 100m(a section of speed reduction), and downstream 100m$\sim$downstream 400m(a section of reduced speed maintenance and acceleration).