• 제목/요약/키워드: spectrum hole

검색결과 147건 처리시간 0.025초

Ni와 Co 촉매금속의 표면 거칠기에 따른 그래핀 성장 특성 (Characteristic of Ni and Co metal-catalyst surface roughness in graphene)

  • 김은호;안효섭;장현철;조원주;이완규;정종완
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.263-263
    • /
    • 2010
  • High temperature annealing is required to synthesize graphene using CVD. When thin metal catalyst is used for the synthesis, the high temperature pre-annealing makes the thin catalyst highly agglomerated. We investigated the agglomeration effect on the shape of the synthesized graphene. It is found that high temperature annealing makes randomly distributed many hole or blister on metal catalyst, and the synthesized graphene features floral pattern around the hole. The floral patterns of graphene turned out to be multi-layers and higher D peaks in raman spectrum.

  • PDF

Black Hole Binaries Dynamically Formed in Globular Clusters

  • Park, Dawoo;Kim, Chunglee;Lee, Hyung Mok;Bae, Yeong-Bok;Belczynski, Krzysztof
    • 천문학회보
    • /
    • 제42권1호
    • /
    • pp.43.1-43.1
    • /
    • 2017
  • We investigate properties of black hole (BH) binaries formed in globular clusters, by using direct N-body simulations. Comparing with previous studies which usually considered single BH masses, our models consist of two-component BH masses, or continuous BH mass function with single mass ordinary cluster stars. During the early stage of dynamical evolution, initially distributed BHs are move to the cluster center by dynamical friction, then BH-BH binaries start to be formed, and eventually be ejected from the cluster due to three body interaction. Finally we find the formation efficiency of high mass BHs are alwats larger than that of lower mass BHs, implying that a BH mass spectrum expected from GW observation should be biased to high mass. In addition, mass ratios of BHs in binaries prefer similar masses (ratio~1), while the most extreme case is less than 3. Expected merger rate from our models is about 7 BH-BH mergers per $Mpc^3$ per yr.

  • PDF

Assessment of Nuclear Characteristics of NAA #1 Irradiation Hole in HANARO Research Reactor for Application of the $K_0$-NAA Methodology

  • Moon, Jong-Hwa;Kim, Sun-Ha;Chung, Yong-Sam;Dung, Ho-Mahn
    • Nuclear Engineering and Technology
    • /
    • 제34권6호
    • /
    • pp.566-573
    • /
    • 2002
  • Neutron activation analysis based on $textsc{k}$$_{o}$-standardization method# ($textsc{k}$o-NAA) is Com as one of the most remarkable progresses of the NAA with advantages of experimental simplicity, high accuracy, excellent flexibility with respect to irradiation and counting conditions, and suitability for computerization. This study was carried out to determine the reactor neutron spectrum parameters, i.e. $\alpha$ and f as the main factors of irradiation quality at NAA #1 irradiation hole on HANARO research reactor, to evaluate peak detection efficiency of the gamma-ray spectrometer for the use in the $textsc{k}$$_{o}$ experiments and to compare the measured concentration results with the certified values of some SRMs applying the experimentally determined to-parameters.ers.

Numerical study for identifying damage in open-hole composites with embedded FBG sensors and its application to experiment results

  • Yashiro, S.;Murai, K.;Okabe, T.;Takeda, N.
    • Advanced Composite Materials
    • /
    • 제16권2호
    • /
    • pp.115-134
    • /
    • 2007
  • This study proposes two new approaches for identifying damage patterns in a holed CFRP cross-ply laminate using an embedded fiber Bragg grating (FBG) sensor. It was experimentally confirmed that the reflection spectrum from the embedded FBG sensor was significantly deformed as the damage near the hole (i.e. splits, transverse cracks and delamination) extended. The damage patterns were predicted using forward analysis (a damage analysis and an optical analysis) with strain estimation and the proposed damage-identification method as well as the forward analysis only. Forward analysis with strain estimation provided the most accurate damage-pattern estimation and the highest computational efficiency. Furthermore, the proposed damage identification significantly reduced computation time with the equivalent accuracy compared to the conventional identification procedure, by using damage analysis as the initial estimation.

The $2.5-5.0{\mu}m$ Spectra Atlas of Type 1 Active Galactic Nuclei with AKARI: Establishing the Black Hole Mass Estimator of Active Galactic Nuclei with Hydrogen Brackett Lines

  • 김도형;임명신
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.80.1-80.1
    • /
    • 2012
  • The $2.5-5.0{\mu}m$ spectrum of AGN was poorly understood due to the atmosphere effect beyond $2{\mu}m$. Nevertheless, the $2.5-5.0{\mu}m$ range includes several important lines, such as $Br{\beta}$ ($2.63{\mu}m$), $Br{\alpha}$ ($4.05{\mu}m$), PAH (3.3${\mu}m$) and many molecular or atomic lines. We compile $2.5-5.0{\mu}m$ spectra of 79 AGNs and QSOs from infrared camera (IRC) on AKARI infrared astronomy satellite. Our $2.5-5.0{\mu}m$ spectra will provide an access to full wavelength spectra of AGNs for the first time. Moreover, we present the Brackett line properties, FWHMs and luminosities, of AGNs. Using these Brackett line properties, we derive new black hole (BH) mass estimators. The new BH mass estimators using NIR hydrogen lines will be very useful to estimate BH mass of dusty red AGNs in the future.

  • PDF

리벳구멍을 갖는 2024 알루미늄 합금의 피로 균열 진전 동안에 발생한 음향방출 파형 특성 (Characteristics of the Acoustic Emission Waveforms from the Fatigue Crack Propagation of 2024 Aluminum Alloy with Rivet Hole)

  • 남기우;안석환
    • 한국해양공학회지
    • /
    • 제15권1호
    • /
    • pp.52-56
    • /
    • 2001
  • This study were looks at the effect of the initial cut length or stress concentration level, on the wave forms produced by crack propagation. The signals were collected, then classified visually for each type of sample. They were put into three classes according to their shapes in the time and frequency domain. Each class should domain signals which could be correlated to a certain micro-failure mechanism that occurs during the fatigue process. Classes of these signals compared, with each sample. To see if there were any classes common to the three samples. The fatigue test attempted to determine if the initial cut length has any influence on the type of signals.

  • PDF

다층구조 Organo-lanthanide OLED의 전기적 특성 (Electrical Properties of Multi-layer Organo-lanthanide OLEDs)

  • 하미영;김소연;문대규
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
    • /
    • pp.83-84
    • /
    • 2006
  • ITO/4, 4', 4"-tris (N -3 - methylphenyl - N - phenyl - amino) - triphenylamine, [m-MTDATA] / Terbium Iris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$] / Mg:Ag devices were made to investigate its electrical and light emission properties. The thickness of m-MTOATA layer was varied from 0 to 80 nm. There was a threshold thickness for the sufficient hole injection. The insertion of 20 nm thick m-MTDATA layer between ITO and Tb-complex resulted in the right shift of current-voltage curve because of the insufficient hole injection. The low operating voltage can be obtained above the 40 nm of m-MTDATA layer. The insertion of m-MTDATA induced the increase of the background in the electroluminescence spectrum which was dependent on the current density of the devices.

  • PDF

유기발광디바이스용 정공수송재료의 합성 (Synthesis of Hole Transport Materials for Organic Light Emitting Device)

  • 정평진;조민주
    • 한국재료학회지
    • /
    • 제15권7호
    • /
    • pp.448-452
    • /
    • 2005
  • This study was based on organic electroluminescence display. Especially, TPD and $\alpha-NPD$ for the hole transport materials were synthesized by Ullmann reaction. This reaction was conducted between 3­methylphenylamine, 1-naphthylamine and 4,4'-diiodobiphenyl in toluene containing CuCl catalyst and KOH base. The structural property of reaction products were analyzed by FT-IR, $^1H-NMR$ spectroscopy, and thermal stability, reactivity and PL property were analyzed by melting point, yield and emission spectrum, respectively. The photoluminescence spectra of a pure TPD and $\alpha-NPD$ were observed at approximately 416nm and 438nm respectively. In this study, it was known that the melting point, yield, PL properties of TPD and $\alpha-NPD$ were changed by substituent group of amines.

Supermassive Black Hole Masses of ~500k QSOs from the Sloan Digital Sky Survey

  • Taak, Yoon Chan;Im, Myungshin
    • 천문학회보
    • /
    • 제44권2호
    • /
    • pp.77.2-77.2
    • /
    • 2019
  • Measurements of supermassive black hole (SMBH) masses are crucial in studying the co-evolution of SMBHs and their host galaxies. Although reverberation mapping is the most accurate method known to date, this requires spectroscopic monitoring over long periods. Thus, the current sample barely reaches three digits. The virial method, on the other hand, uses emission-line and continuum properties from a single spectrum to estimate the SMBH mass; hence the name single-epoch method. The Sloan Digital Sky Survey (SDSS) has observed spectra of almost all quasi-stellar objects (QSOs) discovered so far. Building on previous studies, using the single-epoch method, we estimate the SMBH masses of more than 500,000 QSOs from the SDSS DR14 Quasar Catalog. This increases the mass-estimated SMBH sample almost by a factor of two, and especially more for the low-mass regime, which was the main target of SDSS-IV (eBOSS).

  • PDF

Secure and Efficient Cooperative Spectrum Sensing Against Byzantine Attack for Interweave Cognitive Radio System

  • Wu, Jun;Chen, Ze;Bao, Jianrong;Gan, Jipeng;Chen, Zehao;Zhang, Jia
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권11호
    • /
    • pp.3738-3760
    • /
    • 2022
  • Due to increasing spectrum demand for new wireless devices applications, cooperative spectrum sensing (CSS) paradigm is the most promising solution to alleviate the spectrum shortage problem. However, in the interweave cognitive radio (CR) system, the inherent nature of CSS opens a hole to Byzantine attack, thereby resulting in a significant drop of the CSS security and efficiency. In view of this, a weighted differential sequential single symbol (WD3S) algorithm based on MATLAB platform is developed to accurately identify malicious users (MUs) and benefit useful sensing information from their malicious reports in this paper. In order to achieve this, a dynamic Byzantine attack model is proposed to describe malicious behaviors for MUs in an interweave CR system. On the basis of this, a method of data transmission consistency verification is formulated to evaluate the global decision's correctness and update the trust value (TrV) of secondary users (SUs), thereby accurately identifying MUs. Then, we innovatively reuse malicious sensing information from MUs by the weight allocation scheme. In addition, considering a high spectrum usage of primary network, a sequential and differential reporting way based on a single symbol is also proposed in the process of the sensing information submission. Finally, under various Byzantine attack types, we provide in-depth simulations to demonstrate the efficiency and security of the proposed WD3S.