• 한국정보통신학회논문지
• /
• 제11권5호
• /
• pp.921-925
• /
• 2007

본 논문은 체외 충격파 파쇄 장치를 사용하여 결석을 파쇄할 때 방사되는 소리에 관계된 정보를 분석한 것이다. 먼저, 방사음으로부터 대상물의 진동을 관찰하고, 대상물의 진동과 방사음 간의 관계를 통하여 피크주파수의 변화에 관한 정보를 추출하였다. 다음에는, 초점의 위치에 따른 피크주파수의 변화를 관찰하여 초점의 바로 위나 아래 부분보다 정확한 초점에서 대상물을 진동시키기가 더욱 어렵다는 사실을 입증하였다. 마지막으로, 캐비테이션과 방사음과의 관계를 분석하여 대상물의 파쇄에 더 유리한 위치를 조사하였다.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.833-841
• /
• 2011

In this paper, we propose uncoordinated dynamic frequency(channel) allocation schemes based on cognitive radio in mobile cellular networks(MCNs). Under the assumptions that mobile base stations are equipped with cognitive radio(CR) function and they construct uncoordinated network, the proposed scheme enables the MCNs by suppression of successive channel switching and management of channel allocation in a dynamic and distributed manner. The proposed scheme is composed of two phase processes. In the first phase, highly orthogonal sequences are generated and assigned to mobile base stations. In the second phase, each mobile base station is allocated a channel according to the pre-assigned orthogonal sequences. Simulation results show that the number of successive spectrum switching is reduced significantly compared with the random switching scheme.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.983-988
• /
• 2009

본 논문에서는 고속전철 운행에 따라 인접 통신 선로에서 발생하는 유도전압을 국내 고시에 제시된 측정 회로에 따라 측정하고 유도전압의 특징을 분석하였다. 고속전철 선로와 2 km 병행하는 2개 루트의 시험용 통신선로를 구성하여 이격 거리, 병행 거리에 따른 유도전압을 측정 및 분석하고, 측정 회선 단말 접지 위치의 레일과의 거리에 따라 측정값에 대한 영향 여부를 검토하였다. 또한 1일간 시간에 따른 변화, 요일별 변화 등을 분석하였으며, 유도전압에 포함되어 있는 고조파 성분을 확인하였다. 이론과 같이 이격 거리에 따른 유도전압의 차이를 보였으며, 단말의 접지 위치는 측정값에 큰 영향을 주지 않음을 확인하였다. 또한 특정 시간대 및 특정 날짜에 상대적으로 큰 유도전압이 나타남을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1416-1418
• /
• 1998

In this paper, the physical and electrical conduction properties due to the electron beam irradiation for low density polyethylene using insulating materials of the distribution cable and ultra-high voltage cable are studied. In FTIR spectrum for physical properties, the strong absorptions by methyl groups in wavenumbers 720[$cm^{-l}$] and 1463[$cm^{-l}$] are observed, and the effect by residual carbonyl groups (C = 0) is hardly appeared. So, as a result of the electrical conduction properties, it is confirmed that the conduction current is increased nearly to 50[$^{\circ}C$], and is not changed until the crystalline melting point from the temperature over 60[$^{\circ}C$] because of the defects of morphology and the formation of many trap centers by means of electron beam irradiation.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.1-6
• /
• 2004

본 연구는 PCB 기판용 FRP 재료의 열화현상을 규명하기 위하여 열 및 방전에 의한 열화를 각각 모의하여 표면에서의 화학적, 정전적 상관관계를 조사하였다. 열 처리에 따른 시료의 특성변화는 $200^{\circ}C$ 까지는 표면의 소수화로 인하여 접촉각 및 표면전위가 증가하였다. XPS에 의한 분석결과 열처리에 따라 표면측쇄상 산소기의 이탈과 탄소쇄의 불포화 이중결합의 증가로 처리시료에서는 소수성이 증가하였다. 또한 열처리로 인해 착색현상이 발생되었고, 이러한 현상은 ether기에 의해 발생된다는 것을 확인하였다. 방전 처리된 시료의 접촉각 및 표면전위는 표면에 카르복실기 라디칼을 포함하는 다량의 측쇄화가 집중적으로 발생되어 처리시간에 따라 급격한 친수화가 진행되었다.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.87-112
• /
• 2018

In this study, it is aimed to present engineering software to estimate the structural response of concrete arch dam. Type-1 concrete arch dam constructed in the laboratory is selected as a reference model. Finite element analyses and experimental measurements are conducted to show the accuracy of initial model. Dynamic analyses are carried out by spectrum analysis under empty reservoir case considering soil-structure interaction and fixed foundation condition. The displacements, principal stresses and strains are presented as an analysis results at all nodal points on downstream and upstream faces of dam body. It is seen from the analyses that there is not any specific ratio between prototype and scaled models for each nodal point with different scale values. So, dynamic analyses results cannot be generalized with a single formula. To eliminate this complexity, the regression analysis, which is a statistical method to obtain the real model results according to the prototype model by using fitting curves, is used. The regression analysis results are validated by numerical solutions using ANSYS software and the error percentages are examined. It is seen that 10% error rates are not exceeded.

• 한국통신학회논문지
• /
• 제12권4호
• /
• pp.386-398
• /
• 1987

本 論文은 PWM(Pulse Width Modulation)인버어터의 스위칭作用에 의해서 發生하는 高周波 影響을 最小化하기 위한 Suboptimal PAWM(Pulse Amplitude Width Modulation)을 提示하였다. 本 方式은 Suboptimal PWM에서 THD(Total Harmonic Distorition)가 最小가 되는 固定點(基本波 電壓 u1=1.2)에서 하나의 스위칭패턴을 決定하였다. 그리고 電壓은 DC Link에서 DC Chopper에 의해 制御하게 하고 인버어터에서는 단지 高周波만을 制御하도록 하였다. 本 方式은 3相 誘導電動機의 VSD(Variable Speed Drive)에 適用하여 電動機의 騷音, 인버어터의 線間電壓 및 電流, 電流高周波 스펙트럼을 測定하였으며, 他 方式과 比較해 보았다. 그 結果로부터 本 方式의 妥當性을 立證할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.407-413
• /
• 2013

This paper deals with the analysis of dynamic characteristics of mooring system of floating-type offshore wind turbine. A spar-type floating structure which consists of a nacelle, a tower and the platform excepting blades, is used to model the floating wind turbine and connect three catenary cables to substructure. The motion of floating structure is simulated when the mooring system is attached using irregular wave Pierson-Moskowitz model. The mooring system is analyzed by changing cable position of floating structure. The dynamic behavior characteristics of mooring system are investigated comparing with cable tension and 6-dof motion of floating structure. These characteristics are much useful to initial design of floating-type structure. From the simulation results, the optimized design parameter that is cable position of connect point of mooring cable can be obtained.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.201-204
• /
• 2011

For efficient noise reduction in a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrum, a new algorithm was proposed. The suggested algorithm reduces white and electrical noise, and it improves signal-to-noise ratio. This algorithm has been optimized to reduce the noise more efficiently using the traces of signal level. The algorithm has been efficiently combined with derivative window to improve the resolution as well S/N. Time domain data was corrected for DC voltage interference. $t^n$ window was applied in time domain data to improved the resolution. However, $t^n$ window can improve the signal resolution, it will also increase the noise level in frequency domain. Therefore, newly developed noise reduction algorithm will be applied to make a balance between resolving power and S/N ratio for magnitude mode. The trace algorithm can determine the current data point with several data points (mean, past data, calculated past data). In the current calculations, we assumed data points with S/N ratio more than 3 were considered as signal data points. After the windowing and noise reduction, both resolution and signal-to-noise ratio were improved. This algorithm is applicable more efficiently to frequency dependent noise and large size data.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.352-361
• /
• 2013

Combining multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) with a massive number of transmit antennas (massive MIMO-OFDM) is an attractive way of increasing the spectrum efficiency or reducing the transmission energy per bit. The effectiveness of Massive MIMO-OFDM is strongly affected by the channel state information (CSI) estimation method used. The overheads of training frame transmission and CSI feedback decrease multiple access channel (MAC) efficiency and increase the CSI estimation cost at a user station (STA). This paper proposes a CSI estimation scheme that reduces the training frame length by using a novel pilot design and a novel unitary matrix feedback method. The proposed pilot design and unitary matrix feedback enable the access point (AP) to estimate the CSI of the signal space of all transmit antennas using a small number of training frames. Simulations in an IEEE 802.11n channel verify the attractive transmission performance of the proposed methods.