• Horticulture, Environment, and Biotechnology : HEB
• /
• v.59 no.6
• /
• pp.827-833
• /
• 2018

Plasma lighting systems have been engineered to simulate sunlight. The objective of this study was to determine the effects of plasma lighting on tomato plant growth, photosynthetic characteristics, flowering rate, and physiological disorders. Tomato plants were grown in growth chambers at air temperatures of $25/23^{\circ}C$ (light/dark period), in a $16h\;day^{-1}$ light period provided by four different light sources: 1 kW and 700 W sulfur plasma lights (1 SPL and 0.7 SPL), 1 kW indium bromide plasma light, and 700 W high pressure sodium lamp (0.7 HPS) as a control. The totaldry weight and leaf area at 0.7 SPL were approximately 1.2 and 1.3 times greater, respectively, than that of 0.7 HPS at the 62 days after sowing (DAS). The maximum light assimilation rate was observed at 1 SPL at the 73 DAS. In addition, the light compensation and saturation points of the plants treated with plasma lighting were 98.5% higher compared with HPS. Those differences appeared to be related to more efficient light interception, provided by the SPL spectrum. The percentage of flowering at 0.7 SPL was 30.5%, which was higher than that at 0.7 HPS; however, there were some instances of severe blossom end rot. Results indicate that plasma lighting promotes tomato growth, flowering, and photosynthesis. Therefore, a plasma lighting system may be a valuable supplemental light source in a greenhouse or plant factory.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.26 no.4
• /
• pp.273-278
• /
• 2015

Objectives : We retrospectively investigated the efficacy and tolerability of risperidone monotherapy in subjects with autism spectrum disorder (ASD). In addition, we did mixed effect model analysis of the effects of risperidone in patients with ASDs naturalistically treated in a routine clinical setting to determine whether the clinical effects were maintained and the side effects were tolerable. Methods : This retrospective study assessed children and adolescents with ASD, who were on risperidone monotherapy from July 2010 to July 2011 at the Child and Adolescent ASD Clinic at Seoul National Hospital. Outcome measures included the Clinical Global Impression-Severity of Illness (CGI-S) and the CGI-Improvement (CGI-I) scales along with other clinical indices: dosage, target symptoms, and side effects. Results : The mean dose of risperidone in 47 children and adolescents with ASD (40 males, 7 females; age range 5-19 years) who were on risperidone monotherapy was $1.6{\pm}0.8mg/day$, and the mean duration of the treatment period was $20.2{\pm}17.3months$. Aggressive behavior, stereotypic behavior, irritability, and self-injurious behavior were the most frequent target symptoms of risperidone. The most common side effects were weight gain followed by somnolence and extrapyramidal symptoms. In a mixed effects model analysis of CGI-I scores, the mean CGI-I score at the 1 month follow-up was significantly different from the mean CGI-I score of the 3-month follow-up (p=.046), and the CGI-I scores were equally maintained over 3 to 48 months [F(6, 28.9)=4.393, p=.003]. Of the 47 patients, 33 patients (70.2%) were identified as the response group, showing an end point CGI-I rating of 3 or under and having continued risperidone treatment for at least 6 months. The baseline CGI-S score showed significant association with clinical response to risperidone (p=.005), the mean baseline CGI-S was higher in the response group compared to the non-response group. Conclusion : In this study, clinical improvement of risperidone stabilized around 3 months and was equally maintained up to 48 months with tolerable side effects, supporting maintenance of risperidone treatment in children and adolescents with ASDs.

• Geomechanics and Engineering
• /
• v.20 no.2
• /
• pp.131-146
• /
• 2020

Evaluation of earthquake impacts in settlements with a high risk of earthquake occurrence is important for the determination of site-specific dynamic soil parameters and earthquake-resistant structural planning. In this study, dynamic soil properties of Karliova (Bingol) city center, located near to the intersection point of the North Anatolian Fault Zone and the East Anatolian Fault Zone and therefore having a high earthquake risk, were investigated by one-dimensional equivalent linear site response analysis. From ground response analyses, peak ground acceleration, predominant site period, 0.2-sec and 1-sec spectral accelerations and soil amplification maps of the study area were obtained for both near-field and far-field earthquake effects. The average acceleration spectrum obtained from analysis, for a near-field earthquake scenario, was found to exceed the design spectra of the Turkish Earthquake Code and Eurocode 8. Yet, the average acceleration spectrum was found to remain below the respective design spectra of the two codes for the far-field earthquake scenario. According to both near- and far-field earthquake scenarios in the study area, the low-rise buildings with low modal vibration durations are expected to be exposed to high spectral acceleration values and high-rise buildings with high modal vibration durations will be exposed to lower spectral accelerations. While high amplification ratios are observed in the north of the study area for the near-distance earthquake scenario, high amplification ratios are observed in the south of the study area for the long-distance earthquake scenario.

• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.271-277
• /
• 2016

Objectives: In this study, we evaluated the influence of different radiant exposures provided by single-peak and polywave light-curing units (LCUs) on the degree of conversion (DC) and the mechanical properties of resin cements. Materials and Methods: Six experimental groups were established for each cement (RelyX ARC, 3M ESPE; LuxaCore Dual, Ivoclar Vivadent; Variolink, DMG), according to the different radiant exposures (5, 10, and $20J/cm^2$) and two LCUs (single-peak and polywave). The specimens were made (7 mm in length ${\times}$ 2 mm in width ${\times}$ 1 mm in height) using silicone molds. After 24 hours of preparation, DC measurement was performed using Fourier transform infrared spectrometry. The same specimens were used for the evaluation of mechanical properties (flexural strength, FS; elastic modulus, E) by a three-point bending test. Data were assessed for normality, after which two-way analysis of variance (ANOVA) and post hoc Tukey's test were performed. Results: No properties of the Variolink cement were influenced by any of the considered experimental conditions. In the case of the RelyX ARC cement, DC was higher when polywave LCU was used; FS and E were not influenced by the conditions evaluated. The LuxaCore cement showed greater sensitivity to the different protocols. Conclusions: On the basis of these results, both the spectrum of light emitted and the radiant exposure used could affect the properties of resin cements. However, the influence was material-dependent.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.62-69
• /
• 2015

Coastlines are protected by breakwater structures against the erosion of sand or other materials along beaches due to wave action. This research examined the use of physical modeling to determine the effects of the tetrapod size and vertical walls of a rubble mound on the volume of wave overtopping under irregular wave conditions in coastal areas in Busan Yacht Harbor. In this analysis model, the structures were studied using irregular waves and the JONSWAP wave energy spectrum. To understand the effects of the tetrapod size and heights of the vertical wall, the study considered vertical walls of 0, 1.78, 6.83, and 9.33 cm with armor double layered material tetrapods of 8, 12, 16, and 20 tons. An extensive number of experiments covering a relatively large range of variables enabled a comprehensive discussion. First, in the presence of a short vertical wall, the water level played a key role in the overtopping discharge. In such circumstances, the values of the wave overtopping discharge decreased with increasing freeboard size. In the presence of a tall freeboard and middle, the value of the wave overtopping discharge was equally influenced by the vertical wall factor. Moreover, the tetrapod size decreased by an increase in the vertical wall factor, and relationship between them resulted in a short wall height. From an engineering point of view, considering a small water level may allow the choice of a shorter vertical wall, which would ultimately provide a more economical design.

• Applied Biological Chemistry
• /
• v.46 no.2
• /
• pp.69-73
• /
• 2003

A novel antifungal antibiotic for azole-resistant Candida albicans was purified from the culture broth of Bacillus subtilis LAM 97-44 by butanol extraction, Diaion HP-20 and Dowex-50 adsorption chromatography, silica gel flash chromatography followed by HPLC and designated LAM-44A. LAM-44A was stable for 60 min at $100^{\circ}C$, and pH range from 2 to 10. MIC values were observed at $0.5-3.5\;{\mu}g/ml$ against various Candida albicans strains. The antibiotic showed no cytotoxicity for S180, MKN-45, P388, HeLa and 373 at the concentration of 1 mg/ml. LAM-f4A was colorless powder soluble in water, methanol, ethanol, butanol and negative to ninhydrin reaction. The antibiotic had maximum absorption at 273 nm in methanol, and melting point was $202^{\circ}C$. The molecular weight and formula were determined to be 282 and $C_{14}H_{34}O_5$ by $^1H-NMR,\;^{13}C-NMR$, IR spectrum and elemental analysis.

• International Journal of High-Rise Buildings
• /
• v.3 no.1
• /
• pp.65-71
• /
• 2014

Baku, the capital of Azerbaijan, has seen a boom in construction in recent years. The old Baku city has been rapidly transforming into a new hub of high-rise buildings and lively cultural centers hosting the Euro Vision Song Contest in 2012 and European Games in 2015. A major population shift to Baku from its suburbs and the countryside has resulted in the doubling of Baku's population in the 4 years between 2009 and 2013. As of January 2013, Baku's population reached four million people, 43% of the citizens in Azerbaijan according to The State Statistical Committee of Azerbaijan. With this trend, the city needs more high-rise buildings to accommodate rapidly increasing demands for more housing and business space. Until the Azerbaijan Seismic Building Code was published in 2010 and became effective, many different seismic criteria, in terms of building codes and seismic intensities, were used for all new high-rise projects in Baku. Some designers used the SNIP (Russian) code with seismic level 9 or level 8 with 1 point penalty. Others used the Turkish code with Seismic Zone 1, UBC 97 with Zone 2 through 4, or IBC with Sa = 0.75 g through 1.0 g. The seismic intensity is now clarified with the Azerbaijan Seismic Building Code. However, the Azerbaijan Seismic Building Code is appropriate for low-rise buildings applications but may be inappropriate for high-rise project applications. This is because the code-defined response spectrum yields unrealistically conservative seismic forces for high-rise buildings with long periods, as compared to those determined by other internationally accepted building codes. This paper provides observations and recommendations for code-based seismic load assessment of high-rise buildings in the Baku area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.500-504
• /
• 2004

This research is about the result of leakage current waveform about the situation of surface leakage current and environmental changes(Salt fog, clean fog and rain) by EPDM polymer insulators' amount of salt. The researcher presents the result of changing about fundamental harmonic, 3rd harmonic and 5th harmonic from starting point of supplying power to flashover. In this study, researched environmental affects (clean fog, salt fog and .am) about surface aging of polymer insulators and used frequency spectrum of leakage current waveform to develop the diagnostic technique of surface aging. When amount of salt contents changed, surface aging stage and the degree of aging (distortion factor) about 3rd and 5th harmonir waveform on low frequency harmonic wave. The distortion factor which is harmonic percentage about basic harmonic is important pointer to evaluate the surface condition of polymer insulators.

• Journal of radiological science and technology
• /
• v.31 no.4
• /
• pp.355-365
• /
• 2008

Purpose : This study isto determine the grade of brain tumor and compare the characteristics in each grade using in MRS (MR Spectroscopy). Method : STEAM (Stimulated Echo Acquisition Method) and protocol of PRESS (Point Resolved Spectroscopy) were used in the levels of tumor grade. We classified the pattern of tumor and analysis of the spectrum signals quantitatively from voxel in the brain tumor grade. In accordance with the result, we calculated the accuracy of biochemical. Result : In high-grade tumor, the NAA/Cr showed the signal reduction of 29.4% and 53.9%. However Cho/Cr increased 570% and 711%. However, in low-grade tumor, NAA/Cr downed to 42.6% and 58.1%. Cho/Cr increased to 188% and 195%. Conclusion : The study suggests that the comparative analysis of signals from MR spectroscopy could be useful to evaluate the grade of tumor and find out the characteristics of it. By extension, MR spectroscopy can be used for research with other organs in the human.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.20-27
• /
• 2017

This study investigated the problems in current practice of drive-train resonance analysis procedure and suggested solutions. The first problem is the resonance occurrence at the un-identified resonance point by the current practice, as for a solution the force spectrum analysis for each critical force transmitting component was suggested. The second one is the inaccurate estimation of potential resonance point in eigenfrequency analysis because of the non-consideration about the eigenfrequency dependency on rotor-speed, the fine linearization at each rotor speed point all over operational range was proposed to account for the affection. Lastly the insufficient time for resonance activation under run-up simulation condition was recognized as a problem in resonance load increasing analysis, as an alternative, steady state condition was suggested to estimate the maximum load increasing level.