• Nuclear Engineering and Technology
• /
• 제22권4호
• /
• pp.410-415
• /
• 1990

Prompt fission neutron energy spectrum as a function of energies of neutron inducing fission has been calculated en the basis of the Madland-Nix(MN) model. The resultant spectra have been weighted to excitation functions of $^{27}$ Al(n, $\alpha$), $^{32}$ S(n, p) and $^{115}$ In(n, n') threshold reactions in order to get the average cross sections and then spectral indices which are defined as the average cross section ratio for two selective threshold reactions among the above three. It is appeared that spectral indices together with the neutron spectra are varying with energies of neutron inducing fission. This may indicate that the prompt fission neutron energy spectrum can be determined by measuring experimentally the spectral index.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1074-1084
• /
• 2016

This paper presents a transmission method for improving human body communications in terms of spectral efficiency, and the performances of bit-error-rate (BER) and frame synchronization, with a highly simplified structure. Compared to the conventional frequency selective digital transmission supporting IEEE standard 802.15.6 for wireless body area networks, the proposed scheme improves the spectral efficiency from 0.25 bps/Hz to 1 bps/Hz based on the 3-dB bandwidth of the transmit spectral mask, and the signal-to-noise-ratio (SNR) by 0.51 dB at a BER of $10^{-6}$ with an 87.5% reduction in the detection complexity of the length of the Hamming distance computation. The proposed preamble structure using its customized detection algorithm achieves perfect frame synchronization at the SNR of a BER of $10^{-6}$ by applying the proposed pre-processing to compensate for the distortions on the preamble signals due to the band-limit effects by transmit and receive filters.

• Journal of Information Processing Systems
• /
• 제13권5호
• /
• pp.1168-1182
• /
• 2017

In the past decades, various image regularization methods have been introduced. Among them, total variation model has drawn much attention for the reason of its low computational complexity and well-understood mathematical behavior. However, regularization parameter estimation of total variation model is still an open problem. To deal with this problem, a novel adaptive regularization parameter selection scheme is proposed in this paper, by means of using the local spectral response, which has the capability of locally selecting the regularization parameters in a content-aware way and therefore adaptively adjusting the weights between the two terms of the total variation model. Experiment results on simulated and real noisy image show the good performance of our proposed method, in visual improvement and peak signal to noise ratio value.

• Journal of the Society of Disaster Information
• /
• 제19권4호
• /
• pp.950-957
• /
• 2023

Purpose: The response technology is needed to prevent the spill of highly toxic oil contaminants in advance. Therefore, this paper described the results of an experimental study to predict the engineering properties of the developed reactive material. Method: Compaction tests and spectral information acquisition experiments were conducted on the reactive materials, and the results were evaluated. In addition, the correlation between spectral information and maximum dry unit weight was analyzed to evaluate the possibility of predicting the engineering properties for reactive materials. Result: The compaction test results showed that the maximum dry unit weight was in the range of approximately 9kN/m³ to 10kN/m³. The spectral information confirmed that the maximum reflectance decreased as the polynorbornene decreased. Conclusion: It was confirmed that the maximum dry unit weight of the reactive material for absorbing oil contaminants can be predicted using the maximum reflectance according to the component ratio of the reactive material.

• Journal of the Korean earth science society
• /
• 제36권7호
• /
• pp.632-642
• /
• 2015

Seismograms are composed of 3 characteristics, that is, seismic source, attenuation, and site amplification. Among them, site amplification characteristics should be considered significantly to estimate seismic source and attenuation characteristics with more confidence. This purpose of this study is to estimate the site amplification characteristics at each site using horizontal to vertical (H/V) spectral ratio method. This method, originally proposed by Nakamura (1989), has been applied to study the surface waves in microtremor records. It has been recently extended to the shear wave energy of strong motion and applied to the study of site amplification. This study analyzed the H/V spectral ratio of 6 ground motions respectively using observed data from 4 sites nearby in Yedang Reservoir. And then, site amplification effects at each site, from 3 kinds of seismic energies, that is, S waves, Coda waves energy, and background noise were compared each other. The results suggested that 4 sites showed its own characteristics of site amplification property in specific resonance frequency ranges (YDS: ~11 Hz, YDU: ~4 Hz, YDD: ~7 Hz). Comparison of this study to other studies using different analysis method can give us much more information about dynamic amplification of domestic sites characteristics and site classification.

• Korean Journal of Remote Sensing
• /
• 제14권2호
• /
• pp.149-164
• /
• 1998

The main object of this study was to prove the effectiveness of different merging methods by using the high resolution IRS(Indian Remote Sensing Satellite)-1C panchromatic data and the multispectral Landsat TM data. The five methods used to merging the information contents of each of the satellite data were the intensity-hue-saturation(IHS), principal component analysis(PCA), high pass filter(HPF), ratio enhancement method and look-up-table(LUT) procedures. Two measures are used to evaluate the merging method. These measures include visual inspection and comparisons of the mean, standard deviation and root mean square error between merged image and original image data values of each band. The ratio enhancement method was well preserved the spectral characteristics of the data. From visual inspection, PCA method provide the best result, HPF next, ratio enhancement, IHS and LUT method the worst for the preservation of spatial resolution.

• Korean Journal of Remote Sensing
• /
• 제31권5호
• /
• pp.371-384
• /
• 2015

Although GOCI has potential for land surface monitoring, there have been only a few cases for land applications. It might be due to the lack of reliable land products derived from GOCI data for end-users. To use for land applications, it is often essential to provide cloud-free composite over land surfaces. In this study, we proposed a cloud detection method that was very important to make cloud-free composite of GOCI reflectance and vegetation index. Since GOCI does not have SWIR and TIR spectral bands, which are very effective to separate clouds from other land cover types, we developed a multi-temporal approach to detect cloud. The proposed cloud detection method consists of three sequential steps of spectral tests. Firstly, band 1 reflectance threshold was applied to separate confident clear pixels. In second step, thick cloud was detected by the ratio (b1/b8) of band 1 and band 8 reflectance. In third step, average of b1/b8 ratio values during three consecutive days was used to detect thin cloud having mixed spectral characteristics of both cloud and land surfaces. The proposed method provides four classes of cloudiness (thick cloud, thin cloud, probably clear, confident clear). The cloud detection method was validated by the MODIS cloud mask products obtained during the same time as the GOCI data acquisition. The percentages of cloudy and cloud-free pixels between GOCI and MODIS are about the same with less than 10% RMSE. The spatial distributions of clouds detected from the GOCI images were also similar to the MODIS cloud mask products.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제21권8호
• /
• pp.770-775
• /
• 2008

Autonomic nervous system of the anesthetized patients can be influenced by the many kinds of stimulations such as intubation, surgical incision and so on. The changes of the heart rates and blood pressures are surrogates of responses of the autonomic system to the external stimulations. Recently, the power spectral analysis of the heart rate variability (HRV) made it easy to know the fractions and changes of sympathetic and parasympathetic autonomic systems. In this study, the changes of pulse transit time, one of the response of vessels to stimulations, was investigated in relation to the HRV. Ten patients were examined and average age is 22.5 $\pm$ 11.04, average weight is 63 $\pm$ 14.4 kg. The patients were anesthetized only by sevoflurane inhalation. Pulse transit time is determined by calculating the difference of the time between the R peak of ECG and the characteristic point of the plethysmography. Power spectral density (PSD) of the HRV was achieved in the frequency of 0.04-0.15 (LF) and 0.15-0.4 (HF). Compared to preanesthetic period the values of LF and LF/HF ratio of HRV were decreased (p<0.05). HF and PTT was increased in anesthetic state with sevoflurane. Otherwise, after intubation, the HF was decreased and LF, LF/HF ratio and PTT were increased. PSD of the HRV is well-known for the index of the autonomic nervous activity. Not only HRV but PTT analysis also is a useful index reflecting the autonomic responses to various stimulations. And this analysis is useful in bed side monitoring because the calculating method is simple and it takes shorter processing time compared to the HRV analysis.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.314-324
• /
• 1996

A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.

• The Bulletin of The Korean Astronomical Society
• /
• 제46권2호
• /
• pp.68.3-69
• /
• 2021

We present a novel profile stacking technique based on optimal profile decomposition of a 3D spectral line data cube, and its performance test using the HI data cubes of sample galaxies from HI galaxy surveys, THINGS and LITTLE THINGS. Compared to the previous approach which aligns all the spectra of a cube using their central velocities derived from either moment analysis, single Gaussian or hermite h3 polynomial fitting, the new method makes a profile decomposition of the profiles from which an optimal number of single Gaussian components is derived for each profile. The so-called superprofile which is derived by co-adding all the aligned profiles from which the other Gaussian models are subtracted is found to have weaker wings compared to the ones constructed in a typical manner. This could be due to the reduced number of asymmetric profiles in the new method. A practical test made on the HI data cubes of the THINGS and LITTLE THINGS galaxies shows that our new method can extract more mass of kinematically cold HI components in the galaxies than the previous results. Additionally, we fit a double Gaussian model to the superprofiles whose S/N is boosted, and quantify not only their profile shapes but derive the ratio of the Gaussian model parameters, such as the intensity ratio and velocity dispersion ratio of the narrower and broader Gaussian components. We discuss how the superprofile properties of the sample galaxies are correlated with their other physical properties, including star formation rate, stellar mass, metallicity, and gas mass.