• Solar Energy
• /
• v.11 no.1
• /
• pp.41-49
• /
• 1991

In this study, the (P)SiC/(N)Si solar cell is fabricated by the vacuum evaporation method with the substrate temperature at about $200{\pm}5[5^{\circ}C]$ and its characteristics are investigated. The optimal thickness of $1.2[{\mu}m]$ of SiC film is derived from the relation between film thickness and conversion efficiency. The characteristics of solar cells are improved by the annealing. The optimum annealing temperature and duration are $420[^{\circ}C]$ and 12[min], respectively it is shown that the peak values of spectral response are shifted to the long wavelength region with increasing the annealing temperature. The X-ray diffraction patterns and the scanning electron micrographs show the grain grow thin SiC film as the annealing temperature and time is increased. The best conversion efficiency is 11.7[%] for a $2.5{\times}1[cm^2]$ cell.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.384-389
• /
• 2002

A new idea of the wavelength locking module for DWDM application was investigated in the present research. Only one etalon photo-diode is generally used in the internal/external wavelength locking system. For the internal wavelength locking module with 50 GHz applications, an algle tuning method of the etalon commonly applied. However, the alignment process of the etalon with the angle tuning method is limited because the lock performance is extremely sensitive accoriding to the change of the tilting angle. In an optical viewpoint, the alignment tolerance of the locker module with the etalon PD array block was good, and the precise tuning of the wavelength was possible. The characteristics of free spectral range (FSR) and peak shift of wavelength according to the tilting angle with the locker module was investigated. For the present module, the optimized initial tilting angle was experimentally obtained.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.91-96
• /
• 2013

We report a method for optical monitoring of tumors in an animal model using optical coherence tomography (OCT). In a spectral domain OCT system, a superluminescent diode light source with a full width of 66 nm at half maximum and peak wavelength of 950 nm was used to take images having an axial resolution of 6.8 ${\mu}m$. Cancer cells of PC-3 were cultured and inoculated into the hypodermis of auricle tissues in BALB/c nude mice. We observed tumor formation and growth at the injection region of cancer cells in vivo and obtained the images of tumor mass center and sparse circumferences. On the $5^{th}$ day from an inoculation of cancer cells, histological images of the tumor region using cross-sectional slicing and dye staining of specimens were taken in order to confirm the correlation with the high resolution OCT images. The OCT image of tumor mass compared with normal tissues was analyzed using its A-scan data so as to obtain a tissue attenuation rate which increases according to tumor growth.

• International Journal of Oral Biology
• /
• v.46 no.3
• /
• pp.105-110
• /
• 2021

The physicochemical properties of crystalline titanium dioxide nanoparticles (TiO₂ NPs) were investigated by comparing amorphous (amTiO₂), anatase (aTiO₂), metaphase of anatase-rutile (arTiO₂), and rutile (rTiO₂) NPs, which were prepared at various calcination temperatures (100℃, 400℃, 600℃, and 900℃). X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed that the phase-transformed TiO₂ had the characteristic features of crystallinity and average size. The surface chemical properties of the crystalline phases were different in the spectral analysis. As anatase transformed to the rutile phase, the band of the hydroxyl group at 3,600-3,100 cm^-1 decreased gradually, as assessed using Fourier transform infrared spectroscopy (FT-IR). For ultraviolet-visible (UV-Vis) spectra, the maximum absorbance of anatase TiO₂ NPs at 309 nm was blue-shifted to 290 nm at the rutile phase with reduced absorbance. Under the electric field of capillary electrophoresis (CE), TiO₂ NPs in anatase migrated and detected as a broaden peak, whereas the rutile NPs did not. In addition, anatase showed the highest photocatalytic activity in an UV-irradiated dye degradation assay in the following order: aTiO₂ > arTiO₂ > rTiO₂. Overall, the phases of TiO₂ NPs showed characteristic physicochemical properties regarding size, surface chemical properties, UV absorbance, CE migration, and photocatalytic activity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.2
• /
• pp.88-99
• /
• 2019

This study presents the results of analysis for the wave data that were consecutively collected from February 2013 to November 2018 at the location of 1.6 km offshore from Namhangjin beach. The water depth at the location is 30.5 m and waves were measured by AWAC (Acoustic Wave And Current meter). By using wave-by-wave analysis and spectral analysis, wave heights and periods were evaluated and then the relationships between the quantities obtained by the two methods were proposed based on linear regression analysis. In addition, monthly and yearly variations of the significant wave height and period, and the peak wave direction were analyzed. Moreover, the relationship between the significant wave height and period was newly suggested. Variability and probability distribution of the significant wave period with respect to the significant wave height were also examined.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5860-5876
• /
• 2018

A single snapshot data can only provide limited amount of information so that the rank of covariance matrix is not full, which is not adopted to complete the parameter estimation directly using the traditional super-resolution method. Aiming at solving the problem, a joint time delay and angle estimation using matrix pencil method based on information reconstruction vector for orthogonal frequency division multiplexing (OFDM) signal is proposed. Firstly, according to the channel frequency response vector of each array element, the algorithm reconstructs the vector data with delay and angle parameter information from both frequency and space dimensions. Then the enhanced data matrix for the extended array element is constructed, and the parameter vector of time delay and angle is estimated by the two-dimensional matrix pencil (2D MP) algorithm. Finally, the joint estimation of two-dimensional parameters is accomplished by the parameter pairing. The algorithm does not need a pseudo-spectral peak search, and the location of the target can be determined only by a single receiver, which can reduce the overhead of the positioning system. The theoretical analysis and simulation results show that the estimation accuracy of the proposed method in a single snapshot and low signal-to-noise ratio environment is much higher than that of Root Multiple Signal Classification algorithm (Root-MUSIC), and this method also achieves the higher estimation performance and efficiency with lower complexity cost compared to the one-dimensional matrix pencil algorithm.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1821-1833
• /
• 2021

The gas-liquid counter-current flow limitation (CCFL) is closely related to efficient and safety operation of many equipment in industrial cycle. Air-water countercurrent flow experiments were performed in a tube with diameter of 25 mm to understand the triggering mechanism of CCFL. A parallel electrode probe was utilized to measure film thickness whereby the time domain and frequency domain characteristics of liquid film was obtained. The amplitude of the interface wave is small at low liquid flow rate while it becomes large at high liquid flow rate after being disturbed by the airflow. The spectral characteristic curve shows a peak-shaped distribution. The crest exists between 0 and 10 Hz and the amplitude decreases with the frequency increase. The analysis of visual observation and characteristic of film thickness indicate that two flooding mechanisms were identified at low and high liquid flow rate, respectively. At low liquid flow rate, the interfacial waves upward propagation is responsible for the formation of CCFL onset. While flooding at high liquid flow rate takes place as a direct consequence of the liquid bridging in tube due to the turbulent flow pattern. Moreover, it is believed that there is a transition region between the low and high liquid flow rate.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.276-281
• /
• 1990

The equivalent conductance of univalent cation (potassium, silver, thallium and ammonium) perchlorates in methanol containing 18-membered crown ethers, 18-crown-6 (18C6) and 1,10-dithia-18-crown-6 (DT18C6) were measured at different temperatures. The equivalent conductances of ammonium perchlorate were increased by increasing content of DT18C6 exceptionally, due to more favorable solvations than complexations. From the equivalent conductance changes, the formation constants for 1:1 compmlexes have been determined, and the values of enthalpy and entropy changes have been calculated. The complexations of 18C6 and DT18C6 with the univalent cations under investigation are all exothermic and the ${\Delta}$S values are all negative and no considerable differences around 50 J/ (k mol). The selectivity order of 18C6 is $K^+ > Tl^+ > Ag^+ > NH_4^+$, while that of DT18C6 is $Ag^+ > Tl^+ > NH_4^+ > K^+$. By sulfur substitutions in 18C6 result in significant decrease in stability, but the stability of $Ag^+$-DT18C6 complex are $10^4$ times larger than those of $K^+$. This increase of stabilities for $Ag^+$-DT18C6 complex are primary due to the result of favorable exothermic heat of reaction between the polarizable soft cation and soft sulfur centers. In NMR experiment, the stepwise additions of cation perchlorates into crown ether solutions induced two major spectral changes. First, the resonance all shift down field and the cation induced shifts were linear up to 1:1 cation/crown ratio, above which no further changes were observed. On the basis of these results, it could be concluded that 1:1 complex is formed. Second, the magnitudes of cation induced shifts were different each other in same ligand. By addition of silver ion to the solution of DT18C6, the largest shift of proton peak near the sulfur atom was observed. These effects are also arisen from the results of covalent bonding between "soft-soft" interactions.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.5
• /
• pp.287-291
• /
• 1985

The addition of poly(styrenesulfonate) (PSS) to $Ru(bpy)_3^{2+}$ solutions shifted the emission peak by 3 nm to red, and increased emission intensity by 1.8 times. By contrast, poly(vinylsulfonate) (PVS) had little effect on the fluorescence spectrum. The effects of PSS on the spectral properties of $Ru(bpy)_3^{2+}$, were attributed to the presence of a hydrophobic phenyl group in PSS, which interact with $Ru(bpy)_3^{2+}$ by, at least in part, hydrophobic effect. The binding constant of $Ru(bpy)_3^{2+}$ to PSS in 0.1 M NaCl was $6{\times}10^4\;M^{-1}$, and this value was about $10^3$ times higher than those of methyl viologen ($MV^{2+}$) and $Cu^{2+}$. The Stern-Volmer constants of emission quenching of $Ru(bpy)_3^{2+}$ by $MV^{2+}$ and $Cu^{2+}$ in 0.1 M NaCl solutions were 426 and 40 $M^{-1}$, which correspond to second order rate constants($k_q$) of $1.1{\times}10^9\;and\; 1.0{\times}10^8\;M^{-1}s^{-1}$, respectively. The presence of PSS enhanced $K_{SV's}\;by\;{\sim}50$ times, whereas PVS increased the values only 1-4 times. The large enhancing effect of PSS, despite of lower charge density than PVS, was explained in terms of longer life-time of photoexcited $Ru(bpy)_3^{2+}$ bound to PSS and strong association of $Ru(bpy)_3^{2+}$ to PSS due to a specific interaction involving hydrophobic effect. The variation of $K_{SV's}$ on the concentrations of PVS and PSS were also investigated for $Ru(bpy)_3^{2+}-MV^{2+}\;and \;Ru(bpy)_3^{2+}-Cu^{2+}$ photoredox systems.

• Wind and Structures
• /
• v.32 no.3
• /
• pp.227-238
• /
• 2021

This study analyzed the pressure patterns and local pressure of tall buildings with corner modifications (recessed and chamfered corner) using wind tunnel tests and proper orthogonal decomposition (POD). POD can distinguish pressure patterns by POD mode and more dominant pressure patterns can be found according to the order of POD modes. Results show that both recessed and chamfered corners effectively reduced wind-induced responses. Additionally, unique effects were observed depending on the ratio of corner modification. Tall building models with recessed corners showed fluctuations in the approaching wind flow in the first POD mode and vortex shedding effects in the second POD mode. With large corner modification, energy distribution became small in the first POD mode, which shows that the effect of the first POD mode reduced. Among building models with chamfered corners, vortex shedding effects appeared in the first POD mode, except for the model with the highest ratio of corner modifications. The POD confirmed that both recessed and chamfered corners play a role in reducing vortex shedding effects, and the normalized power spectral density peak value of modes showing vortex shedding was smaller than that of the building model with a square section. Vortex shedding effects were observed on the front corner surfaces resulting from corner modification, as with the side surface. For buildings with recessed corners, the local pressure on corner surfaces was larger than that of side surfaces. Moreover, the average wind pressure was effectively reduced to 88.42% and 92.40% in RE1 on the windward surface and CH1 on the side surface, respectively.