• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.513-516
• /
• 2001

Water stress measurements of rice that use spectral reflection characteristics have been conducted to detect a water stress of rice during growing stage. Water stress reaction was measured using a spectroradiometer in the wavelength range from 300nm to 1100nm. In order to maintain all the experimental conditions, the measurement time have been settled at a fixed solar radiation times. Spectral reflectance were measured as a function of the moisture content. The results indicate that the spectral reflectance of rice was dependent on moisture content. As the moisture content is lowered the spectral reflectance of rice formed in NIR wavelength range increased. This effect can be best explained in terms of water stress.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.85-89
• /
• 2005

For the analysis of a vibrating two dimensional structure such as the simply supported rectangular plate, Spectral Finite Element Method (SFEM) has been studied. Under the condition that two parallel edges are simply supported at least and the other two edges can be arbitrary, Spectral Finite Element has been developed. Using this element SFEM is applied to the vibrating rectangular plate which all edges are simply supported, and obtain the frequency response function in frequency domain and the dynamic response in time domain. To evaluate these results normal mode method and finite element method (FEM) are also accomplished and compared. It is seen that SFEM is more powerful analysis tool than FEM in high frequency range.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.147-153
• /
• 2018

Jamming countermeasures are used to decrease or prevent the impact of intentional jamming applied to degrade the quality of information provided by a global navigation satellite system (GNSS) receiver. The maximum performance of jamming countermeasure can be obtained only when a proper technique is applied according to the type of jammer. This paper suggests a jamming identification technique for providing information regarding the type of jamming. The center frequency and bandwidth of jammer signal are inconsistent and may change according to time, and thus a spectral correlation function and wavelet coherence were considered in order to analyze the signal in the time and frequency space. Because the two characteristics derive different analysis results, two different identification techniques were suggested and the performances thereof were analyzed. Numerical results show that the two identification techniques have relative advantages and disadvantages as to time consumed and performance. The suggested methods can sufficiently identify the jammer before the GNSS receiver becomes inoperable because of jamming.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.871-873
• /
• 2008

In this letter, we investigate the spectral efficiency of IEEE 802.22 wireless regional area network (WRAN) spectrum overlay when it is used in TV white space. Since 2004, when the FCC published the notice of proposed rule making 04-186 to make use of unused TV spectrum, the IEEE 802.22 working group has been standardizing specifications for WRAN operations. There have been a few papers investigating the spectral efficiency of this, but their analyses were limited to the cases for various guard distances between WRAN base stations. Since WRAN base station (BS) power for WRAN service may differ from country to country, it is important to analyze the spectral efficiency for various WRAN BS powers. In this letter, we analyze the spectral efficiency of WRAN spectrum overlay as a function of the power of WRAN BSs. The simulation results show that spectral efficiency decreases as the power of WRAN BSs and guard distances increase.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.394-404
• /
• 2013

In the present study, the characteristics of spectral peakedness parameter $Q_p$, bandwidth parameter ${\varepsilon}$, and spectral width parameter ${\nu}$ were analyzed as a first step to define the swell waves quantitatively. For the analysis, the joint probability density function of significant wave heights and peak periods were newly developed. The MCMC(Markov Chain Monte Carlo) simulations have been performed to generate the significant wave heights and peak periods from the developed probability density functions. Applying the simulated significant wave heights and peak periods to the theoretical wave spectrum models, the spectral shapes parameters were obtained and analyzed. Among the spectral shape parameters, only the spectral peakedness parameter $Q_p$, is shown to be independent with the significant wave height and peak wave period. It also best represents the peakedness of the spectral shape, and henceforth $Q_p$ should be used to define the swell waves with a wave period. For the field verification of the results, wave data obtained from Hupo port and Ulleungdo were analyzed and results showed the same trend with the MCMC simulation results.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1639-1649
• /
• 2004

In this paper, a method for detection of forged signatures based on spectral analysis of directional gradient density function and a weighted fuzzy classifier is proposed. The well defined outline of an incoming signature image is extracted in a preprocessing stage which includes noise reduction, automatic thresholding, image restoration and erosion process. The directional gradient density function derived from extracted signature outline is highly related to the overall shape of signature image, and thus its frequency spectrum is used as a feature set. With this spectral feature set, having a property to be invariant in size, shift, and rotation, a weighted fuzzy classifier is evaluated for the verification of freehand and random forgeries. Experiments show that less than 5% averaged error rate can be achieved on a database of 500 signature samples.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.857-864
• /
• 2006

Due to the difficulties in numerical generation of random fields that satisfy not only the probabilistic distribution but the spectral characteristics as well. it is relatively hard to find an exact response variability of a structural response with a specific random field which has its features in the spatial and spectral domains. In this study. focusing on the fact that the random field assumes a constant over the domain under consideration when the correlation distance tends to infinity, a semi-theoretical solution of response variability is proposed for in-plane and plate bending structures. In this procedure, the probability density function is used directly resulting in a semi-exact solution for the random field in the state of random variable. It is particularly noteworthy that the proposed methodology provides response variability for virtually any type of probability density functions.

• Computers and Concrete
• /
• v.16 no.5
• /
• pp.723-740
• /
• 2015

In this study, the seismic performance of skewed highway bridges has been assessed by using fragility function methodology. Incremental Dynamic Analysis (IDA) has been used to prepare complete information about the different damage states of a 30 degree skewed highway bridge. A three dimensional model of a skewed highway bridge is presented and incremental dynamic analysis has been applied. The details of the full nonlinear procedures have also been presented. Different spectral intensity measures are studied and the effects of the period on the fragility curves are shown in different figures. The efficiency, practicality and proficiency of these different spectral intensity measures are compared. A suite of 20 earthquake ground motions are considered for nonlinear time history analysis. It has been shown that, considering different intensity measures (IM) leads us to overestimate or low estimate the damage probability which has been discussed completely.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.698-707
• /
• 1998

For inverse scattering problems reconstructing cross-sectional permittivity distributions of dielectric cylinders, the angular spectral inverse technique using the moment method with pulse basis function suffers from large reconstruction error even if very small noise due to requiring the higher spectral informations on the larger cross-section of the cylinder. To reduce the number of higher-order spectra, this paper presents an improved inverse technique in angular spectral domain applying the moment procedure with a series-expansion basis function for the induced field in each enlarged cross-sectional cell. By choosing adequate spectra and averaging over the enlarged cells with a suitable weighting function, the reconstruction profiles reveal fine enough to suppress the noise effect significantly.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.51-56
• /
• 2007

Feature functions were used for the classification of music. The spectral roll-off, variance, average peak level, and class were chosen to make up a feature function vector. Among these, it is the spectral roll-off function that has a low-frequency to high-frequency ratio. To find the optimal roll-off point, the roll-off points from 0.05 to 0.95 were swept. The classification success rate was monitored as the roll-off point was being changed. The data that were used for the experiments were taken from the sounds made by a modern violin and a baroque one. Their shapes and sounds are similar, but they differ slightly in sound texture. As such, the data obtained from the sounds of these two kinds of violin can be useful in finding an adequate roll-off point. The optimal roll-off point, as determined through the experiment, was 0.85. At this point, the classification success rate was 85%, which was the highest.