• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권2호
• /
• pp.30-40
• /
• 2011

In this study, we compared the analysis results before and after the detrending for the data. According to the comparison results, correlation functions were not much changed while autocorrelation and spectral density functions were largely varied. Especially, time series data with a long-term variation trend showed a distinctive difference. This study demonstrated a usefulness of the detrending for a further analysis.

• 한국지구과학회지
• /
• 제33권5호
• /
• pp.395-400
• /
• 2012

One of the main problems concerning the shallow seismic survey is how to generate high frequency signals with large amplitudes using small seismic sources. If one could focus the seismic energy in the direction of the survey line, it will be much helpful in identifying the first break. In this research, we have used hammer as an impulsive source and compared the signal powers generated by different shapes of the hammer plates: circular, square, and rectangular. The experiment was conducted by calculating the power spectral density function to compare the frequency spectrum and signal power. In the direction perpendicular to the long side of the rectangular plate, the largest seismic energy with the highest frequency was achieved even with the same weights of hammer plates. Our conclusion is that it is more efficient to use a rectangular plate than a circular (or square) one when conducting a 2-D shallow seismic survey.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.895-908
• /
• 2014

The main objective of critical excitation methods is to reveal the worst possible response of structures. This goal is accomplished by considering the uncertainties of ground motion, which is subjected to the appropriate constraints, such as earthquake power and intensity limit. The concentration of this current study is on the theoretical optimization aspect, as is the case with the majority of conventional critical excitation methods. However, these previous studies on critical excitation lead to a discontinuous power spectral density (PSD). This paper introduces some critical excitations which contain proper continuity in frequency domain. The main idea for generating such continuous excitations stems from the combination of two continuous functions. On the other hand, in order to provide a non-stationary model, this paper attempts to present an appropriate envelope function, which unlike the previous envelope functions, can properly cover the natural earthquakes' accelerograms based on multi-peak conditions. Finally, the proposed method is developed into the multiple-degree-of-freedom (M.D.O.F) structures.

• 대한전자공학회논문지SD
• /
• 제40권4호
• /
• pp.58-64
• /
• 2003

잡음 발생기는 주어진 특성을 갖는 잡음 신호를 생성하는데 사용되어진다. 최근의 연구에서 잡음 모델이 복잡한 PSD(Power Spectral Density)를 갖는 경우, DCT 기반 잡음 발생기가 기존의 잡음 발생기보다 우수한 성능을 보였다. 본 논문에서는 DCT를 사용한 저면적 잡음 발생기를 제안한다. 제안된 시스템은 DCT를 제외한 회로의 면적을 약 61∼64% 정도 줄이며, 이와 더불어 41∼56% 정도의 전력소모를 감소시킨다.

• Communications for Statistical Applications and Methods
• /
• 제24권1호
• /
• pp.1-13
• /
• 2017

This manuscript summarized advances in bootstrap methods for long-range dependent time series data. The stationary linear long-memory process is briefly described, which is a target process for bootstrap methodologies on time-domain and frequency-domain in this review. We illustrate time-domain bootstrap under long-range dependence, moving or non-overlapping block bootstraps, and the autoregressive-sieve bootstrap. In particular, block bootstrap methodologies need an adjustment factor for the distribution estimation of the sample mean in contrast to applications to weak dependent time processes. However, the autoregressive-sieve bootstrap does not need any other modification for application to long-memory. The frequency domain bootstrap for Whittle estimation is provided using parametric spectral density estimates because there is no current nonparametric spectral density estimation method using a kernel function for the linear long-range dependent time process.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.14-19
• /
• 2000

A machine tool has some serous stability problem in the from of tool chatter during the cutting process. Chatter vibration deteriorates the surface finish, reduce tool and machine life, accelerate machine tool system component wear, and may lead to an unacceptable noise sound in the working environment. In this study, in order to moni색 of the chatter vibration on the cutting process, the behavior of spectral density of AE signal and principal cutting force signal has been investigated. Furthermore, its reliability from obtained the results has been studied to evaluate and confirm the proposed method with the application procedure and the experimental results.

• 환경영향평가
• /
• 제14권3호
• /
• pp.127-134
• /
• 2005

Recently, aquaculture farm sites have been increased with demand of the expensive fish species and sea food like as seaweed, laver and oyster. Therefore coastal water quality have been deteriorated by organic contamination from marine aquaculture farm sites. For protecting of coastal environment, we need to control the location of aquaculture sites. The purpose of this study is to detect the laver aquaculture sites using multispectral remotely sensed data with autodetection algorithm. In order to detect the aquaculture sites, density slice and contour and vegetation index methods were applied with SPOT and IKONOS data of Shinan area. The marine aquaculture farm sites were extracted by density slice and contour methods with one band digital number(DN) carrying 65% accuracy. However, vegetation index algorithm carried out 75% accuracy using near-infra red and red bands. Extraction of the laver aquaculture site using remotely sensed data will provide the efficient digital map for coastal water management strategies and red tide GIS management system.

• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1248-1256
• /
• 2005

This study was undertaken to investigate the flow characteristics of emulsified fuel with the ultrasonic energy-adding system by using the chaotic method. Efffcts of water contents within emulsified fuel, flow rate and tube length with 5m in diameter from an emulsified chamber has been discussed on the strange attractor and power spectral density function. Five probe sensors were set up from 0.5 to 2.5m by length in 0.5m increments in the tube. In particular, the chaotic features of this system have been practically characterized in terms of chaotic statistics such as the power spectral density function and phase space portraits by resorting to the somewhat noble deterministic chaos theory. In the tube, the dominant frequency increased with increasing water contents and flow rate, but decreased a little with an increase in the length from the emulsified chamber.

• International Journal of Automotive Technology
• /
• 제3권3호
• /
• pp.101-109
• /
• 2002

A time domain method for solving nonstationary random vibration caused by vehicle acceleration is first proposed in which a time changing model is established for representing nonstationary excitation of a rough road. Furthermore a novel frequency domain method called the transient power spectral density with spatial frequency (TPSD) is presented to obtain a response of vehicle system in frequency domain. This method has been proved to be valid by comparing numerical results with the exact solution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.962-965
• /
• 2002

Full scale durability test in the laboratory is an essential of any fatigue life evaluation of components or structures of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, Hydraulic road simulator is used to carry out the fatigue test and the vibration test. In this paper, the algorithm and software to realize the real road profile are developed. The operation software for simultaneously controlled multi-axial simulator is developed and the input and output data are displayed window based PC controller in real time. The software to generate the real road profile are developed. This paper developed a road profile reappearance software and simultaneously apply 3-axial actuator to white noise, so we verified the propriety of reappearance software through accomplishes an real test.