• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.600-612
• /
• 2014

In this paper, we consider the problem of spectrum sensing for advanced television systems committee (ATSC) digital television (DTV) signal detection. To exploit the cyclostationarity of the ATSC DTV signals, we employ spectral correlation density (SCD) as the decision statistic and propose an optimal detection algorithm. The major difficulty is in obtaining the probability distribution functions of the SCD. To overcome the difficulty, we probabilistically model the pilot frequency location and employ Gaussian approximation for the SCD distribution. Then, we obtain a practically implementable detection algorithm that outperforms the industry leading systems by 2-3 dB. We also propose various techniques that greatly reduce the system complexity with performance degradation by only a few tenths of decibels. Finally, we show how robust the system is to the estimation errors of the noise power spectral density level and the probability distribution of the pilot frequency location.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.530-532
• /
• 2007

Multi-Spectral Camera(MSC) is a main payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). The compression method on KOMPSAT-2 MSC was selected and used to match EOS input rate and PDTS output data rate on MSC image data chain. At once the MSC performance was carefully handled to minimize any degradation so that it was analyzed and restored in KGS(KOMPSAT Ground Station) during LEOP and Cal./Val.(Calibration and Validation) phase. In this paper, on-orbit image data chain in MSC and image data processing on KGS including general MSC description is briefly described. The influences on image performance between on-board compression algorithms and between performance restoration methods in ground station are analyzed and discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.298-303
• /
• 2003

The eccentric rotor system has various problems by vibration of unbalance mass. Specially, it is difficult to analyze vibration problem for the drum washing machine due to correlation of transmission paths. We analyze the mechanical structure by multidimensional spectral density to identify the maximum vibration magnitude at the frequency domain. It estimates the coherence function of the signals to pass the transmission paths. In case of the drum washing machine, because the transmission paths are correlated partially it needs to determinate the priority ranking. And the correlated parts are eliminated using conditioned spectral density function. Finally the shielding effect method confirms the reasonability of the modeling.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.2
• /
• pp.123-135
• /
• 2015

In this paper, a reduced-order modeling(ROM) of Burgers equations is studied based on pseudo-spectral collocation method. A ROM basis is obtained by the proper orthogonal decomposition(POD). Crank-Nicolson scheme is applied in time discretization and the pseudo-spectral element collocation method is adopted to solve linearlized equation based on the Newton method in spatial discretization. We deliver POD-based algorithm and present some numerical experiments to show the efficiency of our proposed method.

• Journal of the Optical Society of Korea
• /
• v.5 no.1
• /
• pp.9-15
• /
• 2001

The ocean Scanning Multi-spectral Imager (OSMI) is a payload on the KOrea Multi-Purpose SATellite (KOMPSAT) to perform worldwide ocean color monitoring f the study of biological oceanography. OSMI performs solar and dark calibrations for on-orbit instrument calibration. The purpose of the solar calibration is to monitor the degradation of imaging performance for each pixel of 6 spectral bands and to correct the degradation effect on OSMI image during the ground station date processing. The design, the operation concept, and the radiometric characteristics of the solar calibration are investigated. A linear model of image response and a solar calibration radiance model are proposed to study the instrument characteristics using the solar calibration data. The performance of spectral responsivity and spatial response uniformity. The first solar calibration data and the analysis results are important references for further study on the on-orbit stability of OSMI response during its lifetime.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.370-375
• /
• 1998

Spectral reflectance signatures of upland crops at OSMI bands were collected and evaluated for the feasibility of crop discrimination knowledge-based on crop calendar. Effective bands and their ratio values for discriminating corn from two other legumes were defined with OSMI equivalent bands and their ratio values. June 22 among measurements dates was the best date for corn discrimination from two other legumes, peanut and soybean, because all OSMI equivalent bands and their ratio values in June 22 were highly significant for corn separability. Phenological growth stage of a silage corn (rs510) could be estimated as a function of spectral reflectance signatures in vegetative stage. Five growth stage prediction models were generated by the SAS procedures REG and STEPWISE with OSMI equivalent bands and their ratio values in vegetative stage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.136-145
• /
• 1997

To analyzed ride quality and to predict durability in vehicle dynamics, it is essential to describe a road surface profile precisely. This paper presents a technique to generate road surface profiles in a spatial domain by using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis, The derived road surfaces are compared to ISO(International Organization for Standardization) standards and classifications, proposed by the MIRA(Motor Industry Research Association). The methodology in this paper is also proposed to generate road roughness description with a limited external data. A small amount of external curve data is combined with an internal PSD function to generate road surface roughness in a spatial domain.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.49-56
• /
• 2011

This study investigates how American English high back vowels are identified. American English and Korean speakers participated in a phonetic experiment for this study. This study shows their response times of the vowels and discusses how the speakers identified them. For the experiment I used a synthesized vowel continuum between American English /u/ and /$\mho$/based on American English male speakers' voice obtained by Peterson and Barney (1952). I manipulated spectral steps and vowel duration of the stimuli. The statistical results showed that American English speakers were not able to distinguish the stimuli based on spectral quality. Instead they relied on vowel duration. This suggests that the American English high back vowels have changed since Peterson and Barney recorded them in 1952. The Korean speakers also relied on vowel duration, not spectral quality since they could not distinguish them. American speakers' response times of these vowels were not affected by both spectral quality and vowel duration. Koreans' response times were affected by vowel durations only.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.323-328
• /
• 2007

We derived the dispersion curves and spectral density for several models constructed from physical property data of representative geology in Korea. Comparison between monopole and dipole sources, between physical properties, and between dispersion curves and spectral density maps have been made. The result was very helpful in sonic data acquisition as well as velocity determination.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.831-834
• /
• 2008

The spectral element model is known to provide very accurate structural dynamic characteristics, while reducing the number of degree-of-freedom to resolve the computational and cost problems. Thus, the spectral element model with variational method for an axially moving Bernoulli-Euler beam subjected to axial tension is developed in the present paper. The high accuracy of the spectral element model is the verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension the vibration characteristics, wave characteristics, and the static and dynamic stabilities of a moving beam are investigated.