• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.257-258
• /
• 2004

The dose from radionuclides released from high-level radioactive waste (HLW) glasses as they corrode must be taken into account when assessing the performance of a disposal system. In the performance assessment (PA) calculations conducted for the proposed Yucca Mountain, Nevada, disposal system, the release of radionuclides is conservatively assumed to occur at the same rate the glass matrix dissolves. A simple model was developed to calculate the glass dissolution rate of HLW glasses in these PA calculations [1]. For the PA calculations that were conducted for Site Recommendation, it was necessary to identify ranges of parameter values that bounded the dissolution rates of the wide range of HLW glass compositions that will be disposed. The values and ranges of the model parameters for the pH and temperature dependencies were extracted from the results of SPFT, static leach tests, and Soxhlet tests available in the literature. Static leach tests were conducted with a range of glass compositions to measure values for the glass composition parameter. The glass dissolution rate depends on temperature, pH, and the compositions of the glass and solution, The dissolution rate is calculated using Eq. 1: $rate{\;}={\;}k_{o}10^{(ph){\eta})}{\cdot}e^{(-Ea/RT)}{\cdot}(1-Q/K){\;}+{\;}k_{long}$ where $k_{0},\;{\eta}$ and Eaare the parameters for glass composition, pH, $\eta$ and temperature dependence, respectively, and R is the gas constant. The term (1-Q/K) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_{0},\;{\eta}\;and\;E_{a}$ are the parameters for glass composition, pH, and temperature dependence, respectively, and R is the gas constant. The term (1-Q/C) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_0$, and Ea are determined under test conditions where the value of Q is maintained near zero, so that the value of the affinity term remains near 1. The dissolution rate under conditions in which the value of the affinity term is near 1 is referred to as the forward rate. This is the highest dissolution rate that can occur at a particular pH and temperature. The value of the parameter K is determined from experiments in which the value of the ion activity product approaches the value of K. This results in a decrease in the value of the affinity term and the dissolution rate. The highly dilute solutions required to measure the forward rate and extract values for $k_0$, $\eta$, and Ea can be maintained by conducting dynamic tests in which the test solution is removed from the reaction cell and replaced with fresh solution. In the single-pass flow-through (PFT) test method, this is done by continuously pumping the test solution through the reaction cell. Alternatively, static tests can be conducted with sufficient solution volume that the solution concentrations of dissolved glass components do not increase significantly during the test. Both the SPFT and static tests can ve conducted for a wide range of pH values and temperatures. Both static and SPFt tests have short-comings. the SPFT test requires analysis of several solutions (typically 6-10) at each of several flow rates to determine the glass dissolution rate at each pH and temperature. As will be shown, the rate measured in an SPFt test depends on the solution flow rate. The solutions in static tests will eventually become concentrated enough to affect the dissolution rate. In both the SPFt and static test methods. a compromise is required between the need to minimize the effects of dissolved components on the dissolution rate and the need to attain solution concentrations that are high enough to analyze. In the paper, we compare the results of static leach tests and SPFT tests conducted with simple 5-component glass to confirm the equivalence of SPFT tests and static tests conducted with pH buffer solutions. Tests were conducted over the range pH values that are most relevant for waste glass disssolution in a disposal system. The glass and temperature used in the tests were selected to allow direct comparison with SPFT tests conducted previously. The ability to measure parameter values with more than one test method and an understanding of how the rate measured in each test is affected by various test parameters provides added confidence to the measured values. The dissolution rate of a simple 5-component glass was measured at pH values of 6.2, 8.3, and 9.6 and $70^{\circ}C$ using static tests and single-pass flow-through (SPFT) tests. Similar rates were measured with the two methods. However, the measured rates are about 10X higher than the rates measured previously for a glass having the same composition using an SPFT test method. Differences are attributed to effects of the solution flow rate on the glass dissolution reate and how the specific surface area of crushed glass is estimated. This comparison indicates the need to standardize the SPFT test procedure.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.272-279
• /
• 2011

Copper cyanide is a chemical produced in large quantities with 2,500 tonnes being produced in 2006. It is mainly used for electroplating copper, particularly alkali-Cu plate and brass plating. The purpose of this study is to reassess the physicochemical properties and environmental fate of copper cyanide based on reliable data and and to conduct an ecotoxicity test according to the OECD test guidelines as an initial environmental risk assessment (need to state where this was done). Metal containing inorganic substances are not subject to degradation, biodegradation or hydrolysis. Aquatic toxicity tests of copper cyanide were conducted according to OECD test guideline 201, 202 and 203 for green algae, daphnia, and fish, respectively. The following acute toxicity test results were obtained for aquatic species: 0.089 mg $L^{-1}$ (Algae, 72 Hr-$EC_{50}$); 0.21 mg $L^{-1}$ (flea, 48 Hr-$LC_{50}$); 0.62 mg $L^{-1}$ (Fish, 96 Hr-$ErC_{50}$). The chemical possesses properties indicating a hazard for the aquatic environment (acute toxicity in fish, daphnia and algae below 1.0 mg $L^{-1}$). As a result of this study, copper cyanide has become a candidate for detailed risk assessment. Countries that produce this chemical in significant quantities are recommended to perform specific assessments.

• Korean journal of food and cookery science
• /
• v.26 no.5
• /
• pp.503-510
• /
• 2010

Different amounts of black garlic extract(0, 1, 3, 6, 9 and 12%(W/W)) were added to white pan bread, and the quality characteristics were evaluated. The pH and density of dough was decreased with increasing concentration of black garlic extract. There was no marked difference in the fermentation power of the dough expansion among the samples. The pH of bread decreased, and there were no significant differences in baking loss rate, dough yield or bread specific volume as the concentration of black garlic extract was increased. Regarding crust and crumb color values, lightness gradually diminished with increased amounts of black garlic extract in bread, whereas redness and yellowness increased. For measurement of texture, the highest hardness and gumminess of bread were observed in the 1% added group, and there was no remarkable difference between the 3% added group and control. Sensory evolution was the highest when 6% black garlic extract was added, but there were no significant differences in terms of color or overall acceptability. The results imply that addition of black garlic extract to white pan bread created a healthy and functional bread.

• Journal of Aquaculture
• /
• v.19 no.1
• /
• pp.25-32
• /
• 2006

An experiment was carried out to investigate changing of water quality during the seed production of dark-banded rockfish Sebastes inermis in large scale tanks. Ten broodstock of dark-banded rockfish were held in three circular tanks (diameter 6.5 m; depth 2 m; water volume 50 ton) each (stocking density $0.061kg/m^3$). During the experiment the temperature ranged from 14.2 to $16.1^{\circ}C$. The fingerlings were 134 with rotifers only during 1 to 9 days after parturition, rotifers with Artemia nauplii during 10 to 20 days after parturition, Artemia nauplii only during 21 to 35 days after parturition, Artemia nauplii with commercial diet during 36 to 80 days after parturition and commercial diet only during 81 to 85 days after parturition. Water quality (dissolved oxygen, pH, $NH_4^+-N,\;NO_2^--N,\;NO_3^--N\;and\;PO_4^{3-}-P$) in rearing tanks measured every 5 days in long term monitoring investigation or every 2 hours in diurnal monitoring investigation. In 85 days after parturition, the body weight of fish grew up to 0.88 f and specific growth rate was 8.0%/day in body weight. In long term monitoring investigation, with the increase of the amount of supplied commercial diet, the concentration of dissolved oxygen (DO) and pH decreased, but the concentration of $NH_4^+-N\;(4.5\;to\;76.3{\mu}M),\;NO_2^--N\;(0.02\;to\;0.06{\mu}M),\;NO_3^--N\;(3.0\;to\;5.9{\mu}M)$, and $PO_4^{3-}-P\;(0.41\;to\;0.59{\mu}M)$ increased. In the diurnal monitoring investigation, the concentration of $NH_4^+-N$ showed great fluctuation and ranged from 3.0 to $9.1{\mu}M$ when fed rotifers, 16.3 to $45.8{\mu}M$ when fed Artemia nauplii and 36.5 to $120.1{\mu}M$ when fed commercial diet. After daily feeding with each of feed, the amount of dissolved inorganic nitrogen (DIN) and phosphorus (P) wastage were 7.0 g and 0.7 g when fed rotifers, 24.7 g and 0.7 g when fed Artemia nauplii and 140.9 g and 2.2 g when 134 commercial diet. The amount of DIN and phosphorous wastage during 134 commercial diet was significantly higher than that of fed rotifer and Artemia nauplii (P<0.05). Results will provide valuable information far water quality management and culture of dark-banded rockfish in commercial seed production systems.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.205-209
• /
• 1977

The pool size of plasma glucose, turnover rate and other concerned items for glucose metabolism in normal laying hen were investigated by a single-injection method using $U-C^{14}-glucose$. The 11.6 nCi of pure dose was injected to a hen normally fed through the wing vein. The glucose concentration in plasma sample taken at 5 minutes after injections was 214mgper 100ml. From the plottings of logarithmic standard specific activities of plasma taken from 5 to 120 minutes against the time after injection and from the regresion analysis, metabolic states were determined. The pool size was 1.07g, turnover rate was 0.024 per minute, turnover time was 41 minutes, utilization rate was 26mg/min. (0.83 g/hr/kg B.W. 3/4) and glucose space(extracellular fluid volume) was 25.3 per cent of body weight. The values obtained from. 10-50 minutes samples were similar to those described above, which we from 5-120 minutes samples.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.694-699
• /
• 2008

Considering the severe regulation associated with sludge treatment such as direct landfill and ocean dumping, there is no doubt in that an advanced study for the proper treatment of sludge is urgently needed in near feature. As one of viable method for sludge treatment, fry-drying of sludge by waste oil has been investigated in this study. The fundamental mechanism of this drying method lies in the phenomenon of rapid moisture escape in the sludge pore toward oil media. This is caused by the severe pressure gradient formed by the rapid oil heating between sludge and oil. As part of research effort of fry-drying using waste oil, a series of basic study has been made experimentally to obtain typical drying curves as function of important parameters such as drying temperature, drying time, oil type and geometrical shape of sludge formed. Based on this study, a number of useful conclusion can be drawn as following. The fry-drying method by oil immersion was found quite effective in the removal efficiency of sludge moisture, in general, the moisture content decreases significantly after 10 minutes and the whole moisture content was less than 5% after 14 minutes regardless of the drying temperature. The increase of oil temperature up to 140$^{\circ}C$ favors significantly for the removal of moisture but there was no visible difference above 140$^{\circ}C$. As expected, the decrease of diameter in sludge was efficient in drying due to the increased surface area per unit volume. Further, the effect of oil property by the change of oil type was noted. To be specific, for the case of engine oil the efficiency was found to be remarkably delayed in moisture evaporation compared with that of vegetable oil due to the increased viscosity of engine oil. It produced a result of increasing the evaporation of moisture largely relatively high in the drying temperature over 140$^{\circ}C$ compared with the drying temperature 120$^{\circ}C$ drying temperature as the drying time passed. Accordingly, the drying temperature is considered desirable as keeping over 140$^{\circ}C$ regardless of a sort of used oil.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2115-2123
• /
• 2000

This research was designed to investigate the mathematical model and kinetics of phenol desorption from spent activated carbon. elucidating the desorption characteristics of phenol in the case of using acetone. The Freundlich isotherm constant ($k_e$) is expressed as a function of temperature: $k_e(T)=0.1exp(797.297/T)$. The Freundlich isotherm constant(n) is a weak temperature function and is rarely affected by temperature below $50^{\circ}C$. whereas it is necessary to correct the n value with respect to temperature above $100^{\circ}C$ owing to significant deviation (~5%). Based on the assumption that the surface desorption reaction of phenol is rate limiting, the desorption model was developed. Desorption reaction constant($k_d$) was determined by means of fitting the theoretical results best to experimental ones. The Arrhenius relationships for $k_d$ was expressed by: $k_d(sec^{-1})=0.0479{\cdot}exp(-3037/T)$. The model was verified by comparing the experimental ones under different reaction conditions with the theoretical results determined by the previously estimated $k_d$. Since the difference between them is with 5%, it is expected that the desorption model of this research seems to be appropriate to explain the desorption of phenol from activated carbon by acetone. According to studies of the model. regeneration time and ratio was estimated as a function of temperature under present conditions as follows: (1) regeneration time : ${\tau}_{reg}(hr)=-0.08130T_c+8.4775$. (2) regeneration ratio : ${\eta}(%)=0.2210T_c+83.745$. The regeneration time at 15, 55, and $100^{\circ}C$. respectively. was 7, 4.2, and 0.35 hours, whereas the regeneration ratio was 87. 96. and 99%. respectively. Also. studies of the model would make it possible to determine the regeneration time and ratio under other specific conditions (temperature, applied acetone volume, amount of activated carbon, and initially adsorbed phenol amount).

• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.27-34
• /
• 2007

Respiration sating radiotherapy technique developed In consideration of the movement of body surface and Internal organs during respiration, is categorized into the method of analyzing the respiratory volume for data processing and that of keeping track of fiducial landmark or dermatologic markers based on radiography. However, since these methods require high-priced equipments for treatment and are used for the specific radiotherapy. Therefore, we should develop new essential method whilst ruling out the possible problems. This study alms to obtain body surface motion by using the couch based computer-controlled motion phantom (CBMP) and US sensor, and to develop respiration gating techniques that can adjust patients' beds by using opposite values of the data obtained. The CBMP made to measure body surface motion is composed of a BS II microprocessor, sensor, host computer and stopping motor etc. And the program to control and operate It was developed. After the CBMP was adjusted by entering random movement data, and the phantom movements were acquired using the sensors, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using a rabbit, the real-time respiration gating techniques were drawn by operating the phantom with the opposite values of the data. The result of analysing the acquisition-correction delay time for the data value shows that the data value coincided within 1% and that the acquistition-correction delay time was obtained real-time $(2.34{\times}10^{-4}sec)$. And the movement was the maximum movement was 6 mm In Z direction, In which the respiratory cycle was 2.9 seconds. This study successfully confirms the clinical application possibility of respiration gating techniques by using a CBWP and sensor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.4
• /
• pp.723-729
• /
• 2004

To develop foods using dried persimmon, hot-water extracts of dried persimmons were added into strong wheat flour in the ratio of 10, 20, 30, and 40% and the quality characteristics of baked products were investigated. The proximate compositions of dried persimmons hot-water extracts were 70.37% of moisture, 1.72% of crude protein, 0.18% of crude lipids, 1.99% of crude ash and 4.37% of crude fiber, respectively. With increasing the addition of dried persimmons hot-water extracts, moisture content of the added breads was increased to 47.20% from 41.12% of non-added bread and water activity to 0.576 from 0.495. Water binding capacity of the added dried persimmons hot-water extracts rasied weight of the bread but decreased specific volume. In the hunter's color values the more dried persimmons hot-water extracts was added, the lower L vaules we, and the higher a and b values we. In the texture property, the addition of dried persimmons hot-water extracts increased hardness, gumminess and chewiness, while decreased adhesiveness and fracturability. Judging from texture, taste and overall acceptability of the product, recommended substitution level for hot-water extracts of dried persimmons in bread was 30% or less.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.1
• /
• pp.31-40
• /
• 2003

Background : A CT scan is a useful modality for the diagnosis and evaluation of disease activity in patients with pulmonary tuberculosis. However, the CT diagnosis of pulmonary tuberculosis is sometimes difficult in patients with an atypical CT pattern, especially with lobar consolidation mimicking pneumonia. The aim of this study was to evaluate the clinical and CT features of pulmonary tuberculosis, simulating pneumonia, from a CT scan. Materials and Methods : The clinical and CT features in 21 patients, where the CT diagnosis was pneumonia, or the CT differential diagnosis included pneumonia, were retrospectively analyzed. Results : Of the 21 patients, 6 were immunocompromised, 15 presented with fever or leukocytosis and 15 showed positive sputum smear test for acid fast bacilli. Also, 17 of the 21 patients showed a positive sputum culture test. On the CT scan, consolidation was noted in all patients (100%), volume loss of the involved lobe or segment in 12 (57%), bronchogenic spread in 15 (71%), a cavity in 7 (33%) and bronchial wall thickening also in 7 (33%). The location of the consolidation revealed a relatively even distribution, with no specific predilection site. The other associated pulmonary diseases included ARDS, bronchiectasis, severe pulmonary emphysema, idiopathic pulmonary fibrosis and pulmonary alveolar proteinosis. Conclusion : In the immunocompromised patients, or patients with an underlying pulmonary disease, whose CT scans showed pulmonary consolidation, especially in association with findings of bronchogenic spread, a cavity or bronchial wall thickening, meticulous examination for pulmonary tuberculosis is recommended.