• 공업화학
• /
• 제28권4호
• /
• pp.375-382
• /
• 2017

전기화학 방법을 이용한 이산화티타늄 나노구조에 대한 기존 연구는 불소 이온을 함유한 전해질에서의 산화반응으로 형성된 나노튜브가 연구의 주를 이루고 있다. 최근, 불소 이온이 아닌 고온 인산염이 함유된 글리세롤계 전해질의 개발로 관련 연구가 활발히 진행되고 있다. 본 총설은 이러한 전해질을 활용하여 다양한 이산화티타늄 나노구조를 형성하는 연구 동향에 대해 다루고 있다. 새로운 양극산화법을 통해 형성된 이산화티타늄 나노구조는 기존의 나노튜브에 비하여 비표면적이 넓고 결정성과 접착력이 우수하여 여러 응용분야에 활용가치가 높다. 이에 본 총설에서는 새로운 양극산화법을 이용한 나노구조의 형성 원리, 특성에 대한 개괄적 접근 뿐만 아니라 실제 응용분야에서의 소재성능을 기존 나노튜브 구조와 비교한 결과 등을 망라하여 자세히 소개하고 있다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.369-373
• /
• 2006

본 연구는 3차원 도시 모델링을 위해 라이브러리 기반의 texture mapping 기법을 사용하여 건물 모델을 제작하였다. 이 기법은 건물의 종류 및 특성에 따라 라이브러리 형태로 구축되어있는 texture map을 선택, 출력하여 3차원 건물 프레임에 mapping하는 과정으로 이루어진다. 이 기법의 효과적인 적용을 위해 LiDAR 데이터를 이용하여 건물을 자동적으로 분류하였고, LiDAR 데이터와 수치지도를 이용하여 단위 모델 구현을 위한 건물의 3차원 프레임을 제작하였다. 또한 사실감 있는 건물 texture를 구현하기 위해 실제 건물의 지상사진을 이용하여 texture map 라이브러리를 구축하였다.

• 한국초지조사료학회지
• /
• 제12권4호
• /
• pp.201-210
• /
• 1992

This study was designed to investigate the content of inorganic nitrogen($NH_4$, $NO_3$) and its change in the 7 different sites; the permanent meadows of alfalfa, orchardgrass, and reed canarygrass, the fields of rye. corn, rice and a mountain region. the results from this study were summarized as follows; 1. The contents of ammonium and nitrate in meadows were 15.89-16.46 and 1.32-1.86ppm, respectively, showing the lower level than in other sites and no significant diffirences among three meadows. 2. In the rice field, the average content of ammonium(7.19ppm) was the highest among all sites, but the content of nitrate(1 l.l7ppm) was the lowest. In addition, almost all of nitrate were spreaded around the surface. 3. In the mountain region, the content of $NH_4$(5.79ppm) was slightly high, but the content of nitrate ( 15.18ppm) was very low. 4. In the rye field. the average content of $NO_3$ was 35.46ppm and show the highest (92.63ppm) at the deep part of soil in the specific season, but it decreased with increasing temperature. 5. In the corn field, which kept bare after harvesting the corn silage, the content of $NO_3$ was high, regardless of seasons and depths, and increased up to maximum of 103ppm. 6. The ground water concentrations of $NO_3$ were not more than 50ppm in the pasture. In the vegetable house, they were less than 30 ppm during the winter and spring and were 80-100ppm during the summer and fall. 7. The concentrations of $NO_3$ in Han river water were lower during the winter and spring(20-30ppm) and higher dxring the summer and fall (50-90ppm).

• 한국재료학회지
• /
• 제10권5호
• /
• pp.328-334
• /
• 2000

산화티탄의 광촉매 반응을 이용하여 휘발성 유기화합물(VOC)를 분해제거 하기 위하여 산화티탄을 glass bead에 sol-gel법으로 코팅하였다. 코팅막의 물성은 XRD, BET, SEM을 통해 분헉하였으며, 산화티탄이 galss bead를 채운 실험실규모의 광촉매 반응기를 이용 VOC중 벤젠 및 TCE 가스의 광촉매반응에 의한 분해효율에 대해 연구 컴토하였다. 반응기내의 잔류시간에 따른 가스농도 차이를 gas chromatography로 비교 분석하여 그 분해효율을 계산하였다. 이와 같은 정적인 상태의 실험결과, 400ppmv의 농도의 TCE인 경우 80%의 분해효율을 얻었으며, 50ppmv에서 300ppmv 농도의 벤젠인 경우 65%의 분해효율을 얻었다.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.180-185
• /
• 2011

This study is aimed to increase the activity of cathodic catalysts for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). we investigated the temperature effect of 20wt% Pt/C catalysts at five different temperatures. The catalysts were synthesized by using chemical reduction method. Before adding the formaldehyde as reducing agent, process was undergone for 2 hours at the room temperature (RT), $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$, respectively. The performances of synthesize catalysts are compared. The electrochemical oxygen reduction reaction (ORR) was studied on 20wt% Pt/C catalysts by using a glassy carbon electrode through cyclic voltammetric curves (CV) in a 1M H2SO4 solution. The ORR specific activities of 20wt% Pt/C catalysts increased to give a relative ORR catalytic activity ordering of $80^{\circ}C$ > $100^{\circ}C$ > $60^{\circ}C$ > $40^{\circ}C$ > RT. Electrochemical active surface area (EAS) was calculated with cyclic voltammetry analysis. Prepared Pt/C (at $80^{\circ}C$, $100^{\circ}C$) catalysts has higher ESA than other catalysts. Physical characterization was made by using X-ray diffraction (XRD) and transmission electron microscope (TEM). The TEM images of the carbon supported platinum electrocatalysts ($80^{\circ}C$, $100^{\circ}C$) showed homogenous particle distribution with particle size of about 2~3.5 nm. We found that a higher reaction temperature resulted in more uniform particle distribution than lower reaction temperature and then the XRD results showed that the crystalline structure of the synthesized catalysts are seen FCC structure.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.166-173
• /
• 2018

Molybdenum (Mo) is one of the representative refractory metals for its high melting point, superior thermal conductivity, low density and low thermal expansion coefficient. However, due to its high melting point, it is necessary for Mo products to be fabricated at a high sintering temperature of over $1800-2000^{\circ}C$. Because this process is expensive and inefficient, studies to improve sintering property of Mo have been researched actively. In this study, we fabricated Mo nanopowders to lower the sintering temperature of Mo and tried to consolidate the Mo nanopowders through ultra high pressure compaction. We first fabricated Mo nanopowders by a mechano-chemical process to increase the specific surface area of the Mo powders. This process includes a high-energy ball milling step and a reduction step in a hydrogen atmosphere. We compacted the Mo nanopowders with ultra high pressure by magnetic pulsed compaction (MPC) before pressureless sintering. Through this process, we were able to improve the green density of the Mo compacts by more than 20 % and fabricate a high density Mo sintered body with more than a 95 % sintered density at relatively low temperature.

• 한국환경과학회지
• /
• 제10권5호
• /
• pp.315-321
• /
• 2001

This study was conducted to estimate the decomposition capacity for organic matter by microbe of tidal flat sediments (Hajae, Dongjin and Mankyung). The decomposition rate constants (K') have been determined by Thomas slope method and compared with the values of each tidal flats. The decomposition rates of organic matter by microbe were initially very slow, but at the end of 12 hours, very sharply increased. The values of decomposition rate constant for Dongjin, Mankyung and Hajae tidal flat sediment were 1.364$day^{-1}$/, 1.080d$day^{-1}$ and 0.735$day^{-1}$, respectively. The decomposition rate constant of Dongjin tidal flat sediment which affected by livestock wastewater was higher than others. The decomposition quantity (mg/g/day) of organic matter by microbe of tidal flat sediments was 0.4mg/g/day for Dongjin, 0.36mg/g/day for Mankyung and 0.36mg/g/day for Hajae. The average of decomposition quantity was 0.37mg/g/day. To calculate purification capacity (kg/ha) of organic matter by microbe, we applied to two assumption ; 1) biological action by microbe is occur within 0.1cm under surface 2) specific gravity of sediment are 2.5g/$\textrm{cm}^2$. The purification capacity of organic matter by microbe of tidal flat sediment was calculated to 9.25kg/ha. The relationships between decomposition rate constant (K') and ignition loss (I. L), chemical oxygen demand by sediment (CO $D_{sed}$), total carbon(TC), silt and clay as index of organic matter were a high positive($R^2$=0.97~1.00).

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.691-698
• /
• 2009

Trickling filter has been extensively studied for the domestic wastewater treatment especially for the small scale plants in rural area. The performance of the trickling filter depends on the microbial community and their activity in the biofilms on the media. Nitrification. denitrification, and phosphorus removal of the trickling filter from the wastewater depend on the activity and the amount of the specific microorganisms responsible for the metabolism. For the estimation of the performance of a trickling filter, batch nitrification experiment and fluorescence in situ hybridization (FISH) were carried out to measure the microbial activity and its distribution on the media of the trickling filter. Batch nitrification activity measurement showed that the top part of the 1st stage trickling filter had the highest nitrification activity and the maximum activity was 0.002 g $NH_4$-N/g MLVSS${\cdot}$h. It is thought that higher substrate (ammonia) concentration yields more nitrifying bacteria in the biofilms. The dominant ammonia oxidizer and nitrite oxidizer in the biofilm were Nitrosomonas species and genus Nitrospira, respectively, by FISH analysis. Less denitrifiers were found than nitrifiers in the biofilm by the probe Rrp1088 which specifically binds to Rhodobacter, Rhodovulum, Roseobacter, and Paracoccus. Phosphorus accumulating bacteria were mostly found at the surface of the biofilm by probe Rc988 and PAO651 which specifically binds to Rhodocyclus group and their biomass was less than that of nitrifiers.

• 한국환경과학회지
• /
• 제23권5호
• /
• pp.943-962
• /
• 2014

Industrial gas drying, dilute gas mixtures purification, air fractionation, hydrogen production from steam reformers and petroleum refinery off-gases, etc are conducted by using adsorptive separation technology. The pressure swing adsorption (PSA) has certain advantages over the other methods, such as absorption and membrane, that are a low energy requirement and cost-effectiveness. A key component of PSA systems is adsorbents that should be highly selective to a gas being separated from its mixture streams and have isotherms suitable for the operation principle. The six standard types of isotherms have been examined in this review, and among them the best behavior in the adsorption of $CO_2$ as a function of pressure was proposed in aspects of maximizing a working capacity upon excursion between adsorption and desorption cycles. Zeolites and molecular sieves are historically typical adsorbents for such PSA applications in gas and related industries, and their physicochemical features, e.g., framework, channel structure, pore size, Si-to-Al ratio (SAR), and specific surface area, are strongly associated with the extent of $CO_2$ adsorption at given conditions and those points have been extensively described with literature data. A great body of data of $CO_2$ adsorption on the nanoporous zeolitic materials have been collected according to pressure ranges adsorbed, and these isotherms have been discussed to get an insight into a better $CO_2$ adsorbent for PSA processes.

• 한국멀티미디어학회논문지
• /
• 제15권4호
• /
• pp.472-484
• /
• 2012

보행자의 안전한 보행을 위해 점자형 또는 일반 보도블록이 널리 쓰이고 있다. 불량한 시공 및 유지상태와 장애물은 보행자의 사고를 유발한다. 본 연구는 안전한 보행을 위해 영상에서 가시거리에 위치한 블록의 형태 패턴과 텍스처 특징을 분석하여 보도블록을 검출하는 방법을 제안한다. 보도는 특정모양의 블록이 일정 간격에 반복 배치되어 규칙성을 띄며, 주변 환경 또는 용도에 따라 그 형태는 다양하다. 높은 빈도를 띄는 단일 모양의 다각형을 분석하여 형태 패턴을 추출한다. 일부영역은 이물질 또는 조각난 블록이 원래의 형태를 왜곡시켜 검출되지 않는다. 이 문제는 텍스처 특징벡터 값을 분석하여 해결한다. 앞서 검출된 모든 영역에 대해 분석된 텍스처 특징벡터는 가우시안 분포를 나타내고, 미검출 영역에 대해 분석한 텍스처 특징벡터가 가우시안 분포를 만족하는지 판단한다. 만족된 영역은 보도블록으로 검출한다. 본 실험은 다양한 형태의 보도블록을 인식하였고 95.9%의 정확성을 보였다.