• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.474-478
• /
• 2013

The most general photocatalyst, $TiO_2$ and $WO_3$, are acknowledged to be ineffective in range of visible light. Therefore, many efforts have been directed at improving their activity such as: band-gap narrowing with non-metal element doping and making composites with high specific surface area to effectively separate electrons and holes. In this paper, the method was introduced to prepare a photo-active catalyst to visible irradiation by making a mixture with $TiO_2$ and $WO_3$. In the $TiO_2-WO_3$ composite, $WO_3$ absorbs visible light creating excited electrons and holes while some of the excited electrons move to $TiO_2$ and the holes remain in $WO_3$. This charge separation reduces electron-hole recombination resulting in an enhancement of photocatalytic activity. Added Ag plays the role of electron acceptor, retarding the recombination rate of excited electrons and holes. In making a mixture of $TiO_2-WO_3$ composite, the mixing route affects the photocatalytic activity. The planetary ball-mill method is more effective than magnetic stirring route, owing to a more effective dispersion of aggregated powders. The volume ratio of $TiO_2(4)$ and $WO_3(6)$ shows the most effective photocatalytic activity in the range of visible light in the view point of effective separation of electrons and holes.

• Journal of Powder Materials
• /
• v.24 no.5
• /
• pp.406-413
• /
• 2017

A Nanosized $WO_3$ and CuO powder mixture is prepared using novel high-energy ball milling in a bead mill to obtain a W-Cu nanocomposite powder, and the effect of milling time on the structural characteristics of $WO_3-CuO$ powder mixtures is investigated. The results show that the ball-milled $WO_3-CuO$ powder mixture reaches at steady state after 10 h milling, characterized by the uniform and narrow particle size distribution with primary crystalline sizes below 50 nm, a specific surface area of $37m^2/g$, and powder mean particle size ($D_{50}$) of $0.57{\mu}m$. The $WO_3-CuO$ powder mixtures milled for 10 h are heat-treated at different temperatures in $H_2$ atmosphere to produce W-Cu powder. The XRD results shows that both the $WO_3$ and CuO phases can be reduced to W and Cu phases at temperatures over $700^{\circ}C$. The reduced W-Cu nanocomposite powder exhibits excellent sinterability, and the ultrafine W-Cu composite can be obtained by the Cu liquid phase sintering process.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.327-332
• /
• 1999

Catalytic combustion type gas sensors were fabricated by using noble metal(Pt and Pd) added ${\gamma}-Al_2O_3$ powder with specific surface area of $200\;m^2/g$. The fabricated sensor showed power consumption of 500 mW at the operating voltage of 1.75 V and high sensitivity of about 120 mV for butane, methane, or propane 100%LEL, respectively. The sensor properties also showed good linearity to hydrocarbon gas concentration variation, reproductivity and stability for relative humidity variation. And it showed high stability in butane ambient for 100 days.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.280-285
• /
• 2006

Adsorption characteristics of $H_{2}S$ on KOH impregnated activated carbon were evaluated using dynamic adsorption method in a fixed bed. The pore properties, including BET's specific surface area, pore volume, pore size distribution, and mean pore diameter of these KOH impregnated activated carbons, were characterized from $N_{2}$ adsorption/desorption isotherms. Adsorption equilibrium data were correlated with Langmuir and Freundlich isotherms. The adsorption of $H_{2}S$ onto the KOH impregnated activated carbon is better fitted by the Langmuir isotherm. An increase in the content of oxygen affects the performance of KOH impregnated activated carbon to the greatest extent.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.454-458
• /
• 2007

The removal characteristics of ionic species, such as $Ca^{2+}$, $Mg^{2+}$, $Sr^{2+}$, $SO{_4}^{2-}$, $NO{_3}^-$, and $Cl^-$ by adsorption on the alumina were investigated. Alumina precusor powders were prepared from $Al(NO_3)_3{\cdot}9H_2O$ and $NH_4OH$. Alumina materials prepared from the heat treatment in a furnace at $450{\sim}750^{\circ}C$ for 5 h were analysed using FT-IR and the Brunauer-Emmett-Teller (BET) method. The specific surface area of the product particles decreased significantly with treatment temperature. The adsorption capacities of $SO{_4}^{2-}$and $NO{_3}^-$ on alumina were 23 mg/g and 12.4 mg/g, respectively. But, removal efficiencies of $Cl^-$ were less than 4 mg/g. In general, the removal efficiencies of the anion species were decreased with increasing treatment temperature. The best anion removal efficiency was obtained when the alumina was treated under $450^{\circ}C$. Removal efficiencies of $Ca^{2+}$, $Mg^{2+}$, and $Sr^{2+}$ were increased with increasing treatment temperature.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.445-451
• /
• 2008

In order to regenerate the activated carbon polluted by volatile organic compounds (VOCs) using microwave, adsorption and desorption characteristics of benzene over activated carbon (AC) coated with insulating materials were investigated. Physical characteristics of activated carbon and insulator-coated ACs were investigated by means of $N_2$ gas adsorption and scanning electron microscopy (SEM). The amount of VOC adsorbed showed a positive relationship with the specific surface area of the ACs, and spark discharge over insulator-coated ACs did not occur. Potassium silicate (PS) was the best binder for coating of insulating materials on AC. Amount of benzene desorbed by microwave irradiation was dependent on output power of microwave. Nearly same performance was obtained even though the adsorption-desorption operation under microwave irradiation was repeated 5 times. Finally, it was known that the microwave heating was a very effective mean for regenerating the polluted AC.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.452-456
• /
• 2008

Mesoporous silicate materials have been used as adsorbents due to the advantage of high specific surface area and regular mesopores. In this study, conventional mesoporous silicates (MCM-41, and SBA-15) were utilized as adsorbents for gaseous benzene, one of volatile organic compounds. In the results of the breakthrough curves of gaseous benzene, SBA-15 showed a higher benzene adsorption capacity in adsorption condition of this study. Especially, compared to benzene adsorption of zeolite X, that of SBA-15 was higher by a factor of 2.7. With increasing adsorption temperature, adsorption capacity for benzene of SBA-15 was decreased rapidly. This indicates that benzene adsorbed weakly on SBA-15.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1760-1767
• /
• 2010

FAT compounds photocatalysts were prepared with $TiOSO_4{\cdot}xH_2O$ (TOS) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), BET specific surface area, X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The SEM results showed that ferric compounds and titanium dioxide were fixed onto the AC surfaces. The XRD results showed that Fe-AC/$TiO_2$ composites mostly contained anatase phase. EDX showed the presence of C, O, and Ti with Fe peaks in all samples. The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution, via compare photodegradation of MB solution under visible light and UV light separately. Fe-AC/$TiO_2$ composites had an excellent photocatalytic under strong visible light irradiation. A small amount of Fe ions in AC/$TiO_2$ particles could obviously enhance their photocatalytic activity.

• Applied Microscopy
• /
• v.22 no.2
• /
• pp.118-126
• /
• 1992

The pathway and time course of fucose-containing glycoprotein synthesis and intracellular translocation in osteoclasts of the mice maxillary alveolar bone were investigated by electron microscopic radioautography. Male Balb-C mice weighing 17gm were anesthetized with Nembutal and injected via the external jugular vein with 2.5 mCi of $L-[6-^{3}H]-fucose$ (specific activity 16.8 mCi/mmol) in 0.1 ml of sterile saline solution. At 5, 10, 20, 35 minutes and 8 hours after administration of the $^{3}H-fucose$, animals were killed by intracardiac perfusion of 30ml of 2% glutaraldehyde in a modified Tyroid solution, pH 7.4. The maxillae were then removed and further fixed in Karnovsky fixative for an additional 3-4 hours. After rinsing in 0.1M cacodylate buffer for 10 minutes, the maxillae were demineralized for 2 weeks at $4^{\circ}C$ in ethylene diamine tetra acetate containing 2% glutaraldehyde. The first interdental areas were mesiodistally sectioned into slices of 1mm thickness and postfixed in osmium tetroxide. Tissues were then dehydrated and embedded in Poly Bed. To prepare electron microscopic radioautography, the dipping method of Kopriwa (1973) was employed. Thin sections were coated with a crystalline monolayer of ILford $L_4$ photographic emulsion. After exposure for 4 months at $4^{\circ}C$, the sections were developed Kodak Microdol-X and Phenidon (for compact grains), fixed in 30% sodium thiosulfate, stained with uranyl acetate and lead citrate and examined in the electron microscope (JEOL 1200 EX). At 5, 10 and 20 minutes after injection, $^{3}H-fucose$ was concentrated in Golgi cisternae of the osteoblasts. By 35 minutes the labels were observed over small vesicles in the suprannclear area of osteoclasts. At 8 hours, numerous silver grains were located on the ruffled border and cell membrane of osteoclasts. These results indicate that fucose molecules are added in the Golgi apparatus and small vesicles appear to be responsible for translocation of the glycoproteins to the marginal portion of osteoblasts. The glycoproteins are distributed on the osteoclast cell surface and especially over the ruffled border.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.144-152
• /
• 1993

Immobilized polyethylene glycols onto metal oxides such as ${\gamma}-Al_2O_3$, ${\alpha}-Al_2O_3$, $SiO_2$ and $TiO_2$ were used as phase transfer catalysts for the room temperature synthesis of aniline from nitrobenzene and ironpentacarbonyl. The amount of attached PEG molecules increased with specific surface area of metal oxides. Among the immobilized catalysts tested PEG/${\gamma}-Al_2O_3$ showed the highest activity. The reaction rate increased with the chain length of PEG mole-cules and the aqueous NaOH concentration. Mechanistic study carried out using infrared spectrometer revealed that the role of PEG was to increase the formation of $HFe(CO)_4{^-}$ ion, which is known as active species, and its movement from aqueous to organic phase.