• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.94-100
• /
• 1988

Recently with the rapid development in marine and shipbuilding industries such as marine structures, ship, and chemical plants, there occurs much interest in the study of corrosion fatigue characteristics was closed up an important role in mechanical design. In this study, the 5086 Al-Alloy was tested by used of a rotary bending fatigue tester and was investigated under the environments of various specific resistance and air. The specific resistance, as a corrosion environment, was changed 15, 20, 25 and 5000$\Omega$.cm. The corrosion fatigue crack initiation sensitivity was quantitatively inspected for 5086 Al-Alloy in the various specific resistance. The experimental constants of Paris rule were examined in the various specific resistances, and the influences of load and corrosion with affect the crack growth rate were compared with. Main results obtained are as follows: (1) Number of stress cycles to corrosion fatigue crack initiation delaies and corrosion fatigue crack initiation sensitivity decreases with the increasing for the specific resistance. (2) The experimental constant m of Paris rule decreases with the decreasing for specific resistance. Hence the effect of corrosion is more susceptible than that of stress intensity factor. (3) The corrosion fatigue crack of 5086 Aluminium Alloy appears intergranular fracture. (4) Corrosion sensitivity is decreased with the increasing stress intensity factor and is nearly uniform when stress intensity factor is over 40kg.mm super(-3/2)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.53-60
• /
• 1992

In this study, cathodic protection experiment was carried out by Al-alloy sacrificial anode in marine environments which have specific resistance($\rho$) if 25~7000$\Omega$.cm and investigated protection potential, current density and loss rate of Al-alloy sacrificial anode. The main results resistance($\rho$) of 400$\Omega$.cm, the cathodic protection potential appears high about-720 mV(SCE). But below specific resistance($\rho$) of 300$\Omega$.cm, the cathodic protection potential appears low about-770 mV(SCE) and simultaneously, cathode is protected sufficiently. 2) The loss rate of Al-Alloy sacrificial anode became large with decreasing specific resistance and increasing the ratio(A sub(c)/A sub(a) of bared surface area of anode and cathode. 3) The loss rate of Al-alloy sacrificial anode(w) to the mean current density of anode(i) is as follows. w=ai+b (a, b : experimental constants)

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1013-1018
• /
• 1996

The annealing effects of Au/Te/Au/n-GaAs structure was investigated by using x-ray diffraction, scanning electron microscope, the specific contact resistance and I-V measurement. Increasing the annealing temperature, the intensity of Au-Ga peak by X-ray diffraction was increased. The Ga$\_$2/Te$\_$3/peak got evident for the samples annealed at 400.deg. C and GaAs peak by recrystallization appeared for the samples annealed at 500.deg. C. The variation from the schottky to low resistance contact was confirmed by I-V curve. The lowest value of the specific contact resistance of the samples annealed at 500.deg. C was 3.8*10$\^$-5/.ohm.-cm$\^$2/ but the value increased above 600.deg. C.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.3
• /
• pp.2035-2042
• /
• 1970

Korean Janggi and Western plow to have developed for a long time in the east and west were tested and compared in their draft resistance. The charaderistic of Korean Janggi and plow to be able to make deep plowing, on of the most important factors influeneed the increased yield, were ofserved. The study was undertaken to obtain these basic factors' to device and construct the deep plowing Janggi. The results were as follow; 1. The draft resistance of Korean Janggi far less than that of plow and on the dry field, the influence of soil moisture contant to the draft resistance was larger in the Korean Janggi than in the western plow, but on the rice paddy, there was not differences between them. 2. The plow was more stable than that of Janggi in their operation. 3. The relation ship between the specific draft resistance and plowing depth was shown bygthe carved equation. $$K=Ax+\frac{B}{x}+C$$(K ; specific draft restance, x; plowing depth) A, B, C; Constant controled by soil and instrument factor) 4. Minimam values of the specific draft resistance were as follow; a. On the dry field; Korean Janggi; x = $8{\sim}14cm$ $4K=280{\sim}330gr/cm^2$$ Westean plow; x=$10{\sim}12cm$ $$K=480{\sim}490gr/cm^2$$ 6. On the rice paddy; Korean Janggi; x=$8{\sim}12cm$ $$K=255{\sim}280gr/cm^2$ Western plow; x=$7{\sim}10cm$ $$K=415{\sim}420grc/m^2$$

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.566-568
• /
• 1998

Partial nucleotide sequence (nt 1-1842) of chloramphenicol resistance plasmid pKH7 has been reported previously and residual nucleotide sequence (nt 1843-4118) of pKH7 was determined and then the complete nucleotide sequence of pKH7 was obtained. pKH7 consists of 4118 bp and has three ORFs. Besides Rep and CAT proteins described in previous paper, Pre protein which mediates site-specific recombination in Staphylococcus aureus was found to be on pKH7. R $S_{A}$, a site-specific recombination site of Pre protein, and palA, a specific lagging-strand conversion signal, was also found in pKH7. Amino acid sequence of Pre protein of pKH7 was compared with those of other antibiotic resistant Staphylococcus aureus plasmids.s.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.211-217
• /
• 2003

Recently, with rapid development in marine and shipbuilding industries such as marine structures, ships and chemical plants for ship, there occurs much interest in the study on corrosion characteristics played an important role in mechanical design. This paper was studies on the corrosion characteristics of chromium plating in the marine environment. Under the various specific resistance, the electrochemical polarization test of chromium plating was carried out. And thus corrosion potential, polarization resistance, corrosion current density, control efficiency of corrosion and polarization control behavior of chromium plating are investigated. The main results are as the followed : 1. The polarization resistance of Cr plating and Ni become higher than that of base metal, also and these material become low with decrease of the specific resistance. 2. As the specific resistance decreases, the corrosion current density of Cr and Ni plating is lower than that of base metal. 3. The corrosion reaction of Cr plating, Ni plating and base metal vs. specific resistance is cathodic control.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.63-68
• /
• 1987

In this study, a pantograph leg of the four legged walking vehicle is analysed with regard to mechanical energy consumption. Energy efficiency of the vehicle is estimated in terms of specific resistance varying body height, stride length and walking speed. The interaction between specific resistance and the parameters is investigated.

• The Plant Pathology Journal
• /
• v.20 no.1
• /
• pp.7-12
• /
• 2004

An important recent advance in the field of plant-microbe interactions has been the cloning of genes that confer resistance to specific viruses, bacteria, fungi or insects. Disease resistance (R) genes encode proteins with predicted structural motifs consistent with them having roles in signal recognition and transduction. Plant disease resistance is the result of an innate host defense mechanism, which relies on the ability of plant to recognize pathogen invasion and efficiently mount defense responses. In tomato, resistance to the pathogen Pseudomonas syringae pv. tomato is mediated by the specific recognition between the tomato serine/threonine kinase Pto and bacterial protein AvrPto or AvrPtoB. This recognition event initiates signaling events that lead to defense responses including an oxidative burst, the hypersensitive response (HR), and expression of pathogenesis- related genes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.673-681
• /
• 2014

In this paper, a novel low specific on-resistance SOI LDMOS Device with P+P-top layer in the drift region is proposed and investigated using a two dimensional device simulator, MEDICI. The structure is characterized by a heavily-doped $P^+$ region which is connected to the P-top layer in the drift region. The $P^+$ region can modulates the surface electric field profile, increases the drift doping concentration and reduces the sensitivity of the breakdown voltage on the geometry parameters. Compared to the conventional D-RESURF device, a 25.8% decrease in specific on-resistance and a 48.2% increase in figure of merit can be obtained in the novel device. Furthermore, the novel $P^+P$-top device also present cost efficiency due to the fact that the $P^+$ region can be fabricated together with the P-type body contact region without any additional mask.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.219-228
• /
• 2003

This study was carried to investigate the effect of humic acid and kaloin which cause the turbidity and organic substance component for optimization of drinking water treatment process using the membrane separation. Also we were ovserved the optimum operating condition which flux was stabilized, while specific resistance value in membrane was minimized. As the result, the membrane separation was operated at low specific resistance value with the increase of the pressure. And then, cake load decreased by high velocity with the increase of the linear velocity, and the tendency in which specific resistance value and flux increased. Therefore, we confirmed the optimum operating condition as pressure $2.0 kgf/cm^2,$ 0.92 m/sec linear velocity.