• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.16-21
• /
• 2005

In the design of super tankers or LNG carriers, which transport a large amount of liquid in the cargo tanks, the structural d11mage due to liquid sloshing is an important problem. The impact pressure from sloshing is most violent when the liquid motion of a partially filled tank is in resonance with the motion of a ship. In this study, the sloshing natural periods of a baffled tank, often installed to reduce liquid motion, is analyzed. A variational method is adopted to estimate the sloshing natural periods for a prismatic cargo tank with baffles of arbitrary filling depth of liquid; the results are compared with Lloyd's Register regulations on sloshing periods. In this study, using an effective liquid-fill-depth concept, sloshing periods for a baffled tank can be expressed by the same form as rectangular prismatic tanks without baffles. In contrast to Lloyd's Register regulations, which can be applicable only to cargo tanks with constant baffle size and distribution, the present results can be applicable to cases of variable baffle size and distribution.

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.278-286
• /
• 2019

The Port of Pyeong Taek is located on the west coast, meaning that the difference between the rise and fall of tide is great (flood tide 1.8 to 2.9 knots, ebb tide 1.6 to 2.9 knots). Due to mainly N~NW'ly strong winds & high waves during winter, navigating as well as loading & discharging vessels must focus on cargo handling. The strong tidal and wind forces in the Port of Pyeong Taek can push an LNG carrier away from its berth, which will end up causing forced disconnection between the vessel's cargo line and shore-side loading arm. The primary consequence of this disconnection will be LNG leakage, which will lead to tremendous physical damage to the hull and shore-side equipment. In this study, the 125K LNG Moss Type ship docked at No. 1 Pier of the Pyeong Taek is observed, and the tension of the mooring line during cargo handling is calculated using a combination of wind and waves to determine effective mooring line and mooring line priority management. As a result if the wind direction is $90^{\circ}$ to the left and right of the bow, it was found that line monitoring should be performed bearing special attention to the Fore Spring Line, Fore Breast Line, and Aft Spring Line.

• Spatial Information Research
• /
• 제20권3호
• /
• pp.1-14
• /
• 2012

국내 컨테이너 육상운송은 행정구역을 기준으로 요금이 산정되고 있으나 실제 차량이 이동하는 거리에 의거하여 요금이 결정되지 않아 화주와 운송인 모두에게 합리적이지 못한 방법이다. 본 연구는 GIS의 네트워크 분석 기법의 하나인 서비스 권역 분석을 이용하여 보완된 육상운송운임 산정 방안을 제시하고 현행 행정구역 기준 육상운송운임체계와 비교하여 현행 체계의 문제점을 보완할 수 있는 대안을 도출하고자 출발하였다. 본 연구에서 제시된 컨테이너 육상운송운임 권역은 현행 행정구역 기준 컨테이너 육상운송운임 방식과 비교하여 운송거리를 반영하는 요금의 형평성이나 행정적 편의성 측면에서 더욱 개선되었다고 판단된다. 본 연구가 GIS를 활용하지 않고 컨테이너 육상운송 운임을 산정하는 관행을 개선될 수 있는 계기가 되어 객관적인 데이터에 의거하여 합리적으로 운임을 결정하기 위한 중요한 참고 자료가 될 수 있을 것으로 사료된다.

• 한국중재학회지:중재연구
• /
• 제21권3호
• /
• pp.189-211
• /
• 2011

This article aims at analysing the practical problems of FOB and CIF terms relating to Incoterms$^{(R)}$2010 in case of L/C transactions and presenting the defending measures against them. According to Incoterms$^{(R)}$2010, FOB and CIF terms are to be used only for sea or inland waterway transport and require the seller deliver the goods on board the vessel nominated by the buyer at named port of shipment. So if FOB and CIF terms will be used in sea transport under L/C transaction, the seller should ship the goods on the nominated vessel and present the shipping document indicating "on board vessel" to the issuing bank but the parties agree to present the received bill of lading according to special condition on L/C which is" received bill of lading are acceptable". In practical transaction, FOB and CIF terms are usually used in aircraft cargo, container cargo or multimodal transport. these facts are a violation of Incoterms. Incoterms$^{(R)}$2010 which regulated that FOB and CIF terms may not be appropriate where goods are handed over the carrier before they are on board the vessel for example goods in container. These transactions are a temporary expedient and breach of Incoterms in the international trade which must be corrected as soon as possible.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.85-92
• /
• 2015

In general, when ships are designed, structural strength and fatigue strength must be verified based on the relative rules respectively. In case of Slurry Iron Sand Carrier designed to carry Iron-Sand saturated at water content, there is no special consideration of fatigue strength analysis. However, this vessel is similar to Ore Carrier in consideration of the overall characteristics of loaded cargo and the shape of cargo hold. Therefore we verified fatigue strength based on fatigue analysis procedure of ore carrier in DNV Rules and carried out the study for improving of fatigue strength of Slurry Iron Sand Carrier.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.93-104
• /
• 2017

IMO type C independent tank is one of the cargo containment system specified on IGC code. It is normally adopted for small and medium size liquefied gas carrier's cargo containment system and it can be applied to fuel tank of LNG fueled vessel. This study focuses on rule scantling process and evaluation methods in early design stage of type C independent tank. Actual design results of 22K LPG/Ammonia/VCM carrier's No.2 cargo tank are demonstrated. This paper presents the calculation methods of design acceleration and liquid height for internal design pressure as defined on IGC code. And this paper shows the applied results of classification rules about shell thickness requirement and buckling strength. Additionally this paper deals with evaluation methods of structural strength and cumulative fatigue damage using FE analysis.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.22-30
• /
• 2005

Sloshing loads, produced by the violent liquid free-surface motions inside the cargo tank have become an important design parameter in ship building industry since there have been demands for the increased sizes of the cargo containment system of LNG carriers. In this study, sloshing impact pressure acting on the shell of the spherical cargo tank of an LNG carrier as well as dynamic pressure and flow behavior around the pump tower located at the center of the tank have been calculated. Comparative numerical sloshing simulations for a spherical LNG tank using 2-D LR.FLUIDS which is based on the finite difference method and 3-D MSC.DYTRAN which is capable of calculating nonlinear fluid-structure interaction have been carried out. A method of calculating sloshing-induced dynamic loads and the subsequent structural strength analysis for pump tower of a spherical LNG carrier using MSC. DYTRAN and MSC.NASTRAN have been presented.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.89-93
• /
• 2007

The Boil-off gas (BOG) generation during the voyage is inevitable since Natural Gas (NG) in normally liquefied below -160 degree C in atmosphere condition and small heat ingress due to relatively hot outside keeps evaporating continuously. The one of major issue in LNG carriers is to handle generated BOG from cargo tank. The generated BOG affects to increase the cargo tank pressure and Gas Management System (GMS) for LNG carriers is closely related to cargo tank pressure maintenance. Economically, BOG is generally used as fuel in LNG carrier. Newly developed GMS for LNG carrier in boiler propulsion system, VaCo System, not only accomplish automatic control in GMS but also ensure safer operation.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.5-11
• /
• 2011

In this paper, the dynamic response analysis of a floating crane with elastic booms and a cargo is performed. The objective is to consider the effects of the elastic boom in the lifting design stage. Governing equations of the motion for the system which consists of interconnected rigid and flexible bodies are derived based on the formulation of flexible multibody system dynamics. To model the boom as a flexible body, floating reference frame and nodal coordinates are used. Coupled surge, pitch, and heave motion of the floating crane with the cargo which has 3 degree of freedom is simulated by solving the equation numerically. Finally, the effects of the elastic boom for the lifting design that the floating crane is required to lift a heavy cargo are discussed by comparing the simulation result between with the elastic boom and with the rigid one.

• 아태비즈니스연구
• /
• 제15권2호
• /
• pp.271-282
• /
• 2024

Purpose - The purpose of this study is to examine legal problems in managing special customs clearance companies that were not covered in previous studies, and seek legal solutions. Design/methodology/approach - This study tries to analyze and the Administrative Rules related to special customs clearance and suggest alternatives since the management of the special customs clearance system is mainly carried out through Administrative Rules. Findings - The definition of a consignment carrier under the Customs Act does not reflect the reality, and the subject of registration does not coincide with the Customs Act and Administrative Rules. Article 2 of the Customs Act, the definition of consignments and the subject of registration of consignment forwarders should include international logistics forwarders who "arrange logistics of import and export cargo". In the E-commerce Administrative Rules revised in July 2023, the registration of e-commerce companies subject to special customs clearance, the registration of companies with preferential customs clearance and notification of changes, and the provision of preferential customs clearance can be seen as new legislation beyond the mandate of the Customs Act. Research implications or Originality - It it time to allow recipients and agents to submit customs clearance lists to protects the rights of goods recipients.