• 대한화학회지
• /
• 제7권1호
• /
• pp.51-57
• /
• 1963

It is well known that the graphite flakes become spherulite, when a suitable amount of nodulizing element, such as cerium or magnesium, is added to the cast iron. The change of graphite from flake to nodular shape improves not only the tensile strength but the ductility as well. However, the mechanism of spheroidization of graphite in cast iron has not yet been clearly understood, and various theories proposed by a number of investigators were such that it may be due to the special nucleation effect, prevention of flake formation by the adsorption of magnesium vapour on the graphite surface or file surface free energy difference between plain graphite and magnesium-adsorbed graphite. Regardless of the speculations of spheroidizing mechanism of the graphite in the cast iron, the final phenomenon comes to the conclusion that it may be due to the lack of wettability between graphite and iron matrix. In order to collaborate this fact through an experimental method, the authors have constructed a vacuum arc furnace for the wettability measurement as its first step. Our study and experiments were then directed to the comparison of the wettability between iron and graphite on the two cases (namely, the one where magnesium was preliminarily coated on the graphite surface and the other not coated), by means of contact angle measurements. The result was such that a significant difference of the contact angles has been shown between the above two cases. indicating the spheroidization of graphite which might have resulted from the lack of wettability between magnesium-adsorbed graphite and iron matrix.

• 유통과학연구
• /
• 제2권1호
• /
• pp.63-97
• /
• 2004

Nowadays port has changed so rapidly as other economic variables. The main issues of these changes are classified with some problems such as the progress of containerization and enlargement of ship size and its speed, the introduction and expansion of EDI system, and the inducement of private capital in port development. Therefore, the competition among ports is severer than before, especially in container cargos. Almost all ports try to strengthen their competitive power and enlarge their port performance and throughput through many kinds of efforts and strategies. Port marketing is important approach and methods in order to make understand port and make call on their ports, of course, realizing the importance of port for the regional economics and employment generation. In this paper, the various marketing concepts are redefined and applied in terms of port and shipping service with which marketing is not so much popular and familiar. After many diagnoses and investigations are executed with special logistical viewpoints and attention, this paper suggests some countermeasures of port marketing in the angles of 4Ps. The strategies and countermeasures are classified in 3 stages according to their broadness and specificity. The privatization of port and port competition need the renovation and rationalization of traditional port activities and old port operation customs. Although this paper suggest many ideas with focusing Busan port, these ideas will be used in other ports. I think it is necessary further study concerned this topics and some limitations which this paper contains.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.30-32
• /
• 2001

Switched reluctance motors have the advantage a high torque/weight ratio, as the large reluctance torque is made by salient poles of both start and rotor, and a high reliability. On the other hand, the switched reluctance motors have the disadvantage of a large ripple torque which is made by salient poles. So the application for the industrial fields have been limited to special cases. Geometric significant parameters are ${\beta}_r$ and ${\beta}_s$ respectively the rotor and stator pole arc while the significant electric parameters are the angles where the drive switches are turned on and off. It can be simulated that ${\beta}_r$ and ${\beta}_s$ must be chosen in a particular region of the plane (${\beta}_r,\;{\beta}_s$) called the feasible triangle. The aim of this paper is to simulate the minimum of the torque ripple by using finite element method and to determine the best choice of the rotor and stator pole arc.

• Nuclear Engineering and Technology
• /
• 제37권2호
• /
• pp.201-206
• /
• 2005

Fretting, which is a special type of wear, is defined as small amplitude relative motion along the contacting interface between two materials. The structural integrity of steam generators in nuclear power plants is very much dependent upon the fretting wear characteristics of Inconel 690 U-tubes. In this study, a finite element model that can simulate fretting wear on the secondary side of the steam generator was developed and used for a quantitative investigation of the fretting wear phenomenon. Finite element modeling of elastic contact wear problems was performed to demonstrate the feasibility of applying the finite element method to fretting wear problems. The elastic beam problem, with existing solutions, is treated as a numerical example. By introducing a control parameter s, which scaled up the wear constant and scaled down the cycle numbers, the algorithm was shown to greatly reduce the time required for the analysis. The work rate model was adopted in the wear model. In the three-dimensional finite element analysis, a quarterly symmetric model was used to simulate cross tubes contacting at right angles. The wear constant of Inconel 690 in the work rate model was taken as $K=26.7{\times}10^{-15}\;Pa^{-1}$ from experimental data obtained using a fretting wear test rig with a piezoelectric actuator. The analyses revealed donut-shaped wear along the contacting boundary, which is a typical feature of fretting wear.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.80-87
• /
• 2005

A set of experiments was carried out for obtaining the velocity field around the hydrofoil of finite span, using a wing of the NACA 0012 section in a circulating water channel. DPIV technique was used to measure the velocity field, and the velocity measurements along the span were done for 3 speeds, 3 submerged depths, and 4 angles of attack. Experimental data are compared with the theoretical assumptions, as well as the numerical findings by Lee and Lee(2004). Special care is given to the flow near the tips and in the region close to the leading edge. Though indirect, using the measured data of the velocity, it is now possible to compare the aerodynamic and the hydrodynamic strength of the circulation distribution of a wing in the framework of the lifting-line theory.

• 한국농촌건축학회논문집
• /
• 제23권2호
• /
• pp.25-32
• /
• 2021

The purpose of this study is to examine the materials on Bangdapjin, summarize the excavation surveys and compare them with the past literature records and to determine the location of the Bangdapjin government office facilities. It was categorized into the castle in the original cadastral map, which allowed to identify the overall shape of Jionseong Castle. The Chi on the castle wall and Ongseong on the Munji have also been identified. The majority of state-owned land in the original cadastral map is usually concentrated at the point where the road from the north intersects with the road from the east to the castle, which is presumably where public buildings were located. One of the photos in the 1950s shows the presence of a building presumed to be an inn featuring, extraordinary shape that deserves special attention. The gate is believed to have had Ongseong due to evidence of a portion protruded at right angles from the castle according to the original cadastral map.

• Journal of Audiology & Otology
• /
• 제24권2호
• /
• pp.107-111
• /
• 2020

The present study aimed to determine the test-retest reliability of subjective visual horizontal (SVH) testing when tested with solid and dotted line images. In this repeated measures study, 36 healthy young Malaysian adults (mean age=23.3±2.3 years, 17 males and 19 females) were enrolled. All of them were healthy and had no hearing, vestibular, balance, or vision problems. The SVH angles were recorded from each participant in an upright body position using a computerized device. They were asked to report their horizontality perception for solid and dotted line images (in the presence of a static black background). After 1 week, the SVH procedure was repeated. The test-retest reliability of SVH was found to be good for both solid line [intraclass correlation (ICC)=0.80] and dotted line (ICC=0.78). As revealed by Bland-Altman plots, for each visual image, the agreements of SVH between the two sessions were within the clinically accepted criteria (±2°). The SVH testing was found to be temporally reliable, which can be clinically beneficial. Both solid and dotted lines in the SVH testing are reliable to be used among young adults.

• 대한청각학회지
• /
• 제24권2호
• /
• pp.107-111
• /
• 2020

The present study aimed to determine the test-retest reliability of subjective visual horizontal (SVH) testing when tested with solid and dotted line images. In this repeated measures study, 36 healthy young Malaysian adults (mean age=23.3±2.3 years, 17 males and 19 females) were enrolled. All of them were healthy and had no hearing, vestibular, balance, or vision problems. The SVH angles were recorded from each participant in an upright body position using a computerized device. They were asked to report their horizontality perception for solid and dotted line images (in the presence of a static black background). After 1 week, the SVH procedure was repeated. The test-retest reliability of SVH was found to be good for both solid line [intraclass correlation (ICC)=0.80] and dotted line (ICC=0.78). As revealed by Bland-Altman plots, for each visual image, the agreements of SVH between the two sessions were within the clinically accepted criteria (±2°). The SVH testing was found to be temporally reliable, which can be clinically beneficial. Both solid and dotted lines in the SVH testing are reliable to be used among young adults.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.261-266
• /
• 2022

Notably, laser surface patterning facilitates tribological applications under lubricated sliding contacts. Consequently, a special pattern that can reduce the coefficient of friction under contact is considered necessary for improved machine efficiency. However, inappropriate pattern designs produce higher friction coefficients and cannot reduce friction. In this study, we use cast iron pins as specimens to investigate their friction and wear characteristics. Moreover, we experimentally investigate the correlation between the friction reduction effect and the design of groove crosshatch patterns fabricated with various angles and widths. We conduct a friction test using a pin-on-disc type tribometer under grease lubrication to study the friction reduction effect of the specimens, and we observe that the average coefficient of friction changes with the crosshatch angle and width. The experiment reveals that grooved crosshatch specimens with a crosshatch angle of 135°maximize friction reduction. The coefficient of friction of the groove specimens with a width of 120 ㎛ is lower than that of the specimens with a width of 200?. The friction reduction effect of the width of the groove is attributed to the density of the groove pattern. Thus, grooved crosshatch patterns can be designed to maximize friction reduction, and the friction property of a grooved crosshatch pattern is found to be related to its width and angle.

• 한국가스학회지
• /
• 제21권1호
• /
• pp.27-33
• /
• 2017

동토지역에서의 파이프라인 시공 시 계절변화와 그에 따른 지반의 강도변화가 트렌치의 안정성에 영향을 미칠 수 있다. 영국, 러시아, 국내 파이프라인 기준들을 분석하여 직경 30in. 파이프의 트렌치 형상을 도출하였다. 러시아 야쿠츠크(Yakutsk) 지역의 계절별 지반조건에서 횡방향 사면경사($0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$)와 종방향 사면경사($20^{\circ}$, $30^{\circ}$, $40^{\circ}$)에 따른 트렌치의 안정성을 분석하였다. 강도감소법을 이용하여 트렌치와 사면의 안정성 해석을 수행하였다. 그 결과, 사면의 경사가 높을수록 안전율이 낮게 나왔으며 여름철 지반조건에서는 횡방향 사면경사가 $30^{\circ}$일 때 트렌치의 안정성을 확보하기 어려우며 지상으로부터 1m 아래에서 예상 파괴면을 확인하였다. 종방향 사면의 경사가 낮을 때에는 트렌치 부근의 파괴가 일어날 가능성이 높았지만 종방향 사면의 경사가 높을 때에는 트렌치 부근의 파괴 보다는 사면 전체의 파괴가 주를 이루는 것으로 분석되었다. 겨울철 지반조건에서는 지표면의 온도가 영하로 내려가서 지반 공극 내 얼음 발생으로 인하여 점착력이 발생되는 효과가 있어, 특수한 외부 하중이나 급격한 온도변화가 없을 경우에는 트렌치 사면 경사 $0{\sim}40^{\circ}$에서 안전성의 문제는 없을 것으로 판단되었다.