• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.403-407
• /
• 2010

Gecko adhesion system consists of beam-shaped seta and spatula which has the role of adhesive pad. In this paper, adhesion mechanism of gecko adhesion system is performed by using adhesive beam contact model. this model has a feature of non-uniform stress profile on the contact surface and adhesion/detachment mechanism is determined by the tensile stress of the contact region. a spatula tip pad has the role of reduction of maximum tensile stress and adhesive force is increased due to this effect. As for a reverse loading case, maximum compressive stress drops by the spatula effect and this cause unsymmetric loading conditions between adhesion and detachment forces. In this study, finite element method is used for the analysis of adhesive beam contact model and the results for spatula effect are presented.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.550-553
• /
• 2010

본 논문에서는 seta와 spatula로 구성된 게코(gecko) 접착 시스템의 해석을 위한 새로운 adhesive beam contact model을 제시한다. adhesive contact 해석에 있어서 기존의 JKR model은 nano pillar와 같은 형태의 접촉방식의 해석에는 매우 유용하지만, seta와 같이 보(beam)의 형상을 가지는 구조물의 접촉방식의 해석에는 부적합하다. 따라서 본 연구에서는 seta와 같은 보의 형상을 가지는 접촉 시스템의 해석을 위해 adhesive beam contact model을 제시하고, 유한요소 해석을 통하여 접촉면에서의 불균일한 응력분포 상태가 분리 메커니즘에 미치는 영향에 대한 해석 결과를 제시한다. 또한 spatula의 기하학적 형상과 보의 접촉각(contact angle)등이 seta adhesion system의 분리 메커니즘(detachment mechanism)에 미치는 영향에 대한 결과를 제시한다.

• Journal of Oral Medicine and Pain
• /
• v.3 no.1
• /
• pp.3-10
• /
• 1977

Few changes were found in the mouths of 52 smokers were examined as a part of program to evaluate the oral health of Korean smokers. 52 smokers and 30 non-smokers were performed careful oral examination. In many of smokers, heavy, black deposits are found on the buccal and lingual surfaces of the teeth and leukoplakia were obsreved in 2 subjects and varied merely in the severity of the involvement. Cytologic studies were carried out on 60 oral smears from the hard palate, buccal mucosa, and gingiva. Smears were taken wit a wood spatula scraped over the mucosal surface. After fixation the slides were stained using the papanicolau cells without nuclei. The cornified cells were smaller than the noncornified cells and stained a deep brown or orange as compared with the blue or red of the large, round or polygonal cells in nonkeratinized regions of oral mucosa. Abnormal cell forms, suggestive of malignancy were not found in smears from the mucosa of smokers. Cells with large hyperchromatic nuclei and elongated, spindle-type cells with large nuclei were not observed.

• The Journal of the Korean dental association
• /
• v.10 no.8
• /
• pp.531-534
• /
• 1972

The author measured exothermic temperature of the 5 kinds of zinc phosphate cement and 3 kinds of copper phosphate cement during setting process. Cements were mixed on the glass slab with flexible steel spatula at room temperature (25.8℃) for one minute (spatulating speed was 100 strokes per minute) and placed in the incubator of which temperature was held at 37℃ and thermometer was inserted into the cement mass. The powder liquid ration was 3.0gm:1ml and 1.5gm:1ml. The results were as follows. 1) The heat generated after mixing these cements was under 47.22℃. 2) The range of thermal change of the zinc phosphate cements during setting process was wider than copper phosphate cements. 3) The exothermic temperature from the thin mix was higher than thick mix. 4) The exothermic temperature of the zinc phosphate cements was higher than copper phosphate cements.

• Parasites, Hosts and Diseases
• /
• v.54 no.2
• /
• pp.221-224
• /
• 2016

A visceral helminth of the squid, Todarodes pacificus, is reported from the East Sea, the Republic of Korea. Total 39 squid samples were purchased from a fish market in Jumunjin-eup, Gangneung-si (City) from August 2014 to July 2015 and were examined for helminth parasites with naked eyes and under a stereomicroscope after opening the abdominal cavity with a pair of scissors. Whitish larval worms were mainly found in the stomach and abdominal cavity of the squid. They were detected in 25 (64.1%) out of 39 squids examined, and the infection density was 7 larvae per infected squid. Spatula-shaped larvae were $8.2{\times}2.0mm$ in average size, round to slightly flattened anteriorly, with round hatching posteriorly, and had characteristic 4 tentacles with numerous hooklets in the scolex. The larvae were identified as the plerocercoid stage of Nybelinia surmenicola by their morphological features. This finding represents a new host record and the first report of N. surmenicola infection in T. pacificus squids from the east coast of Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.10
• /
• pp.1465-1471
• /
• 2004

A trial was conducted to determine the effect of abrasive strips and abrasive paint in layer cages on claw length and claw sharpness, foot condition, feather cover and mortality of hens. During the preparation of the cages for the experiment it was simpler and took less time to apply the pre-prepared paint with a spatula to the egg guard compared to sticking the abrasive strips onto the egg guard. Fitting the strips took longer because it had to be cut from a 25 mm roll, cut into the appropriate lengths, the tape backing removed and then stuck onto the egg guard section. Abrasive paint was more effective as a claw shortener than abrasive strips. The birds using the abrasive paint had the shortest (p<0.05) claw length and lowest (p<0.05) claw sharpness. One of the original reasons for reducing claw length with claw shorteners was to reduce mortality by minimising skin skin abrasions caused by the claws. Surprisingly hen mortality from prolapse and cannibalism was higher (p<0.05) in cages fitted with abrasives. There are no other reports in the literature showing an increase in prolapse and cannibalism from hens using abrasives.

• Research in Plant Disease
• /
• v.21 no.3
• /
• pp.231-234
• /
• 2015

Elsinoe fawcettii and E. australis are two currently recognized scab pathogens of citrus. E. fawcettii has at least six pathotypes while E. australis has at least two pathotypes. Colonies of E. fawcettii and E. australis do not sporulate in artificial media including potato dextrose agar (PDA). Whiteside's method has been widely used for preparing conidial inoculum in vitro. This study was carried out to develop efficient method for conidia production from artificial media. We developed a shaking method which included the following steps: 1) Colony grown on PDA was mashed with a steel spatula; 2) Mycelia fragments were cultured in 50 ml sterilized rain water in a rotary shaker-incubator (180 rpm) at $25^{\circ}C$ for 24 h: 3) The conidia suspension was filtered through two layers of cheesecloth. Average conidia production of all isolates tested using this shaking method was approximately 13.1 times higher than that from Whiteside's method in this study.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.791-795
• /
• 2005

A symmetric approach, using external rhinoplasty, is presented to aid the plastic surgeon in obtaining improved aesthetic and functional results in patients with postoperative nasal deformities. The external approach yields a full visualization of the underlying nasal framework and intraoperative evaluation of the deformities to be corrected subsequently. The nasal septal cartilage is unequivocally one of the best graft sources for reconstruction of the dorsum, columella or tip. It has fairly even surface and pliability in carving and shaping the graft. The graft can be obtained during the surgery with less morbidity and prepared easily for need of the shape. The only real disadvantage is the limited amount of cartilage that can be obtained from the septum. The dorsal and caudal rims, one or more cm in width, of the nasal septum should not be disturbed to maintain the nasal frame during harvesting the septal graft. Authors invented novel instruments, J & D knife and Flat (Spatula) suction tip, and have employed the devices for harvesting the septal cartilage. We were unable to gain enough amount of the cartilage by using a swivel knife or cartilage scissors. The septal cartilage can be resected as much as needed with newly invented instruments which facilitate a separation(method) technique.

• Restorative Dentistry and Endodontics
• /
• v.1 no.1
• /
• pp.34-38
• /
• 1975

Artificial canals were prepared by means of engine reamer on the slab which was made of clear acrylic resin. The shape of this canal is similar to the natural canal, the size is almost same as Kerr File No. 70, and the length is about 20mm. Sealer, Zine oxide eugenol mixture was prepared as matched to spatula test. Lentulo filler was inserted as deep as middle portion and apical one-third portion of the canal and the dental engine was driven in the speed of 1,000 and 3,000 r.p.m. in 30 seconds and 60 seconds with feeding of the sealer. The author measured the excess flow of the canal sealer from Lentulo end. Following are the results obtained from this study. 1. Lentulo insertion at the middle portion 1,000 r.p.m. in 30 seconds case: 0.21mm Same as above in 60 seconds: 0.20mm 2. Lentulo insertion at apical-thirds. 1,000 r.p.m. in 30 seconds: 0.22mm. Same as above in 60 seconds: 0.20mm. 3. Lentulo insertion at middle portion. 3,000 r.p.m. in 30 seconds: 0.14mm Same as above in 60 seconds: 0.25mm. 4. Lentulo insertion at apical-thirds, 3,000 r.p.m. in 30 seconds: 0.11mm Same as above in 60 seconds: 0.27mm.

• Mycobiology
• /
• v.35 no.4
• /
• pp.226-229
• /
• 2007

To produce fruiting bodies of Oudemansiella mucida, porcelain fungus, on the oak sawdust medium, additives suitable for the mycelial growth and fruiting body formation were screened. In general, the mycelial growth of the three strains of O. mucida used in this study have been good on oak sawdust mixed rice bran of $20{\sim}30%$. The mycelia incubated in potato dextrose broth for 7 days were inoculated on oak sawdust medium supplemented with various ratios of rice bran and incubated for 30 days at $25^{\circ}C$ in the dark condition until the mycelia of O. mucida fully colonized the media from top to bottom. Then, top surface of the media in the bottles were horizontally scratched with a spatula and filled with tap water for 3 hours. To induce the primordial formation of O. mucida, the bottles were transferred to the mushroom cultivating room under 12 hrs of light (350 lux) and dark condition with relative humidity of 95% at $17^{\circ}C$. The primordia of O. mucida were formed on the surface of oak sawdust media after 7 days of incubation. The mature fruiting bodies were observed 5 days after primordial formation. The fruiting bodies O. mucida were formed on oak sawdust medium mixed with 5 to 30% rice bran. However, abundant fruiting-bodies of O. mucida were produced in oak sawdust medium supplemented with 20% rice bran. This is the first report associated with an artificial fruiting body production of O. mucida in Korea.