• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.147-154
• /
• 2009

Physical properties of rocks, such as velocity, are strongly dependant on detailed pore structures, and recently, pore micro-structures by X-ray tomography techniques have been used to simulate and understand the physical properties. However, the smoothing effect during the tomographic reconstruction procedure often causes an artifact - overestimating the contact areas between grains. The pore nodes near a grain contact are affected by neighboring grain nodes, and are classified into grain nodes. By this artifact, the pore structure has higher contact areas between grains and thus higher velocity estimation than the true one. To reduce this artifact, we tried two image processing techniques - sharpening filter and neural network classification. Both methods gave noticeable improvement on contact areas between grains visually; however, the estimated velocities showed only incremental improvement. We then tried to change the resolutions of tomogram and quantify its impact on velocity estimation. The estimated velocity from the tomogram with higher spatial resolution was improved significantly, and with around 2 micron spatial resolution, the calculated velocity was very close to the lab measurement. In conclusion, the resolution of pore micro-structure is the most important parameter for accurate estimation of velocity using pore-scale simulation techniques. Also the estimation can be incrementally improved if combined with image processing techniques during the pore-grain classification.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.2
• /
• pp.124-132
• /
• 2022

This study was aimed to visualize the spatial distribution of PM₁₀ data measured at non-uniformly distributed observation sites in South Korea. Different spatial interpolation methods were applied to irregularly distributed PM₁₀ observation data from January, 2019, when the concentration was the highest and in July, 2019, when the concentration was the lowest. Four interpolation methods with different parameters were used: Inverse Distance Weighted (IDW), Ordinary Kriging (OK), radial base function, and scattered interpolation. Six cases were cross-validated and the normalized root-mean-square error for each case was compared. The results showed that IDW using smoothing-related factors was the most appropriate method, while the OK method was least appropriate. Our results are expected to help users select the proper spatial interpolation method for PM₁₀ data analysis with comparative reliability and effectiveness.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.24-32
• /
• 2002

In this paper we implemented various image processing filtering using the format converter. This design method is based on realized the large processor-per-pixel array by integrated circuit technology. These two types of integrated structure are can be classify associative parallel processor and parallel process DRAM(or SRAM) cell. Layout pitch of one-bit-wide logic is identical memory cell pitch to array high density PEs in integrate structure. This format converter design has control path implementation efficiently, and can be utilize the high technology without complicated controller hardware. Sequence of array instruction are generated by host computer before process start, and instructions are saved on unit controller. Host computer is executed the pixel-parallel operation starting at saved instructions after processing start. As a result, we obtained three result that 1)simple smoothing suppresses higher spatial frequencies, reducing noise but also blurring edges, 2) a smoothing and segmentation process reduces noise while preserving sharp edges, and 3) median filtering, like smoothing and segmentation, may be applied to reduce image noise. Median filtering eliminates spikes while maintaining sharp edges and preserving monotonic variations in pixel values.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1136-1142
• /
• 2010

In this study, an efficient removal algorithm for specular reflections in a tooth color image is proposed to minimize the artefact interrupting color image segmentation. The pixel values of RGB color channels are initially reversed to emphasize the features in reflective regions, and then those regions are automatically detected by utilizing perceptron artificial neural network model and those prominent intensities are corrected by applying a smoothing spatial filter. After correcting specular reflection regions, multiple seeds in the tooth candidates are selected to find the regional minima and MCWA(Marker-Controlled Watershed Algorithm) is applied to delineate the individual tooth region in a CCD tooth color image. Therefore, the accuracy in segmentation for separating tooth regions can be drastically improved with removing specular reflections due to the illumination effect.

• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.691-700
• /
• 2015

Here, we present a new framework for histogram equalization in which both local and global contrasts are enhanced using neighborhood metrics. When checking neighborhood information, filters can simultaneously improve image quality. Filters are chosen depending on image properties, such as noise removal and smoothing. Our experimental results confirmed that this does not increase the computational cost because the filtering process is done by our proposed arrangement of making the histogram while checking neighborhood metrics simultaneously. If the two methods, i.e., histogram equalization and filtering, are performed sequentially, the first method uses the original image data and next method uses the data altered by the first. With combined histogram equalization and filtering, the original data can be used for both methods. The proposed method is fully automated and any spatial neighborhood filter type and size can be used. Our experiments confirmed that the proposed method is more effective than other similar techniques reported previously.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1982-1988
• /
• 1995

Methane/Air premixed flames are studied numerically, using a detailed chemical model, to investigate the flame strech effects on the extinction in a counterflow. The finite difference method, time integration and modified Newton iteration are used, and adaptive grid technique and grid smoothing have been employed to adjust the grid system according to the spatial steepness of the solution profiles. Results show that the flame stretch, or the conventional nondimensionalized stretch having the tangential flow characteristics of the stretched flame alone cannot adequately describes the extinction phenomena. On the other hand, the local flame stretch having both the normal and tangential flow characteristics of the stretched flame can give a proper explanation to the extinction of the symmetric planar premixed flames stabilized in a counter flow. The extinction condition were found to be a constant local stretch regardless of the equivalence ratio.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1995.06a
• /
• pp.83-86
• /
• 1995

Many image display devices allow only a limited number of colors to be simultaneously displayed. In displaying of natural color image using color palette, it is necessary to construct an optimal color palette and map each pixel of the original image to a color palette with fast. In this paper, we proposed the clustering algorithm using local region block centered one color cluster in the prequantized 3-D histogram. Cluster pairs which have the least distortion error are merged by considering distortion measure. The clustering process is continued until to obtain the desired number of colors. Same as the clustering process, original color image is mapped to palette color via a local region block centering around prequantized original color value. The proposed algorithm incorporated with a spatial activity weighting value which is smoothing region. The method produces high quality display images and considerably reduces computation time.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2019

Foreground/background segmentation in video sequences is often one of the first tasks in machine vision applications, making it a critical part of the system. In this paper, we present an improved sample-based technique that provides robust background image as well as segmentation mask. The conventional multiple interval sampling (MIS) algorithm have suffer from the unbalance of computation time per frame and the rapid change of confidence factor of background pixel. To balance the computation amount, a random-based pixel update scheme is proposed and a spatial and temporal smoothing technique is adopted to increase reliability of the confidence factor. The proposed method allows the sampling queue to have more dispersed data in time and space, and provides more continuous and reliable confidence factor. Experimental results revealed that our method works well to estimate stable background image and the foreground mask.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.64-67
• /
• 1998

여러 해 동안 많은 연구자들에 의해서 코히런트한 간섭신호가 있는 환경에서 신호 의 도래각을 추정하는 방법에 대한 연구가 진행 되어왔다. 이런 방법들은 대부분 공간 평활 (Spatial Smoothing)류의 방법을 사용하고 있으나 Pillai에 의해서 각 센서에 들어오는 신호 의 평균을 이용한 방법이 제안되었다. 이 방법에서는 특별히 복소수의 입력에 대해서는 대 칭형 배열을 사용하도록 했기 때문에 실수 입력을 다룰 때 보다 약 2배의 센서 개수가 필요 하다[S.U.Pillai,Array Signal Processing,Springer-Verlang New York, 1989]. 본 논문에서는 Pillai의 방법을 사용할 때 복소수 입력에서도 실수 입력의 경우와 같은 개수의 센서를 사용 하는 방법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.848-854
• /
• 1996

Many image display devices allow only a limited number of colors to be simultaneously displayed. in disphaying of natural color image using color palette, it is necessary to construct an optimal color palette and the optimal mapping of each pixed of the original image to a color from the palette. In this paper, we proposed the clustering algorithm using local region block centered one color cluster in the prequantized 3-D histogram. Cluster pairs which have the least distortion error are merged by considering distortion measure. The clustering process is continued until to obtain the desired number of colors. The same as the clustering process, original color value. The proposed algorithm incroporated with a spatial activity weighting value which is reflected sensitivity of HVS quantization errors in smoothing region. This method produces high quality display images and considerably reduces computation time.