• 한국공간구조학회논문집
• /
• 제16권3호
• /
• pp.89-97
• /
• 2016

With the recent trend to construct high-rise and large buildings, the steel structure system is widely used, but there are not enough studies on the vibration characteristics of the iFLASH system on the buildings. Therefore, in this study, we performed a vibration measurement of the natural frequency and damping ratio in the stage of iFLASH panel, composit, frame completion and cladding completion. The result findings suggest that the damping ratio after the cladding completion has a greater effect on the reduction of the damping ratio, than the stage after the frame completion.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 춘계학술발표대회 논문집
• /
• pp.112-115
• /
• 2004

The government is in progress the traditional retail market redevelopment and remodeling due to atrophy of the traditional retail market in accordant to opening of the circulation market and changing of the consuming patterns. However, it seemed that primitive project was limited to the environment improvement scope. As the shopping environment which is comfortable to the consumers is provided and the design which considers a traditional retail market specific quality is applied from business plan early. It will be useful for the management normalization of traditional retail market actually. The spatial factors were analyzed as follows. 1. The circulation of consumer should be secured to make boundary line of the pass way. 2. The display booth should be standardized for the security of sight. 3. The signage panel should be consolidated in according to the plan. 4. The street vendor's handcart and tent should be arranged for circulations and the vision line.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.1-10
• /
• 2006

In this paper, a new high resolution XGA-SLM is implemented through modification of a commercial TFT-LCD beam projector and its optical modulation characteristics as a spatial light modulator(SLM) is also analyzed. First, the optics module, projection lamp and fans are removed from a commercial beam projector and instead some electric circuits to compensate their removal are manufactured and then, by inserting them into the beam projector, a new XGA-SLM is finally implemented. Second, from some optical experimental results, this TFT-SLM is found to have a good optical linearity in amplitude and phase modulation characteristics as a function of the input gray levels. Especially, through implementation of a binary phase-type correlator such as BPEJTC by using the suggested TFT-LCD panel, the implemented SLM is proposed as a new relatively low-cost and high resolution SLM for optical information processing.

• 한국공간구조학회논문집
• /
• 제1권2호
• /
• pp.93-100
• /
• 2001

A stress-strain relationship for reinforced concrete membrane elements subjected to reversed cyclic loading is quite different to that of concrete cylinder subjected to uniaxial compression. The compressive strength of cracked concrete membrane elements is reduced by cracking due to tension in the perpendicular direction. Based on the three reinforced concrete panel tests, a softened stress-strain curve of concrete subjected to reversed cyclic loading is proposed. The proposed model consists of seven stages in the compressive zones and six stages in the tensile zones. The proposed model is verified by comparing to the test results.

• 한국공간구조학회논문집
• /
• 제12권4호
• /
• pp.57-69
• /
• 2012

This study investigated the behaviors of the gabled hyperbolic paraboloid shell structure subjected to differential settlement and the horizontal displacement due to the elongation of tie rod/beam on supports. Two types of shell structure with different roof slopes are used in study; conventional type which has perimeter beams around the shell panel, and simple type which removes the edge beams along the slab edge line. The effect of the removal of edge beam under vertical or horizontal displacement on supports, and the roof slope was compared using the finite element analysis.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.443-448
• /
• 2012

A polarimetric experimental method was developed to determine the Jones matrix elements of transparent optical materials without sign ambiguity. A set of polarization dependent transmittance data of the samples was measured with polarizer - sample - analyzer system and another set of data was measured with polarizer - sample - quarter-wave plate - analyzer. Two data sets were compared and mathematically analyzed to obtain the correct signs of the elements of the matrix. The Jones matrix elements of a quarter-wave plate were determined to check the validity of the method. The experimentally obtained matrix elements of the quarter-wave plate were consistent with the theoretical expectations. The same method was applied to obtain the Jones matrix elements of a twisted nematic liquid crystal panel.

• 한국주거학회논문집
• /
• 제6권2호
• /
• pp.51-55
• /
• 1995

This study presents a real neutral floor surface temperature in floor panel heating system(Ondol). The Ondol heating system can keep the constant temperature. However, the actual temperature when a person sits on a floor can be different from the surface temparature of a floor it self. The contents of this study are as follows : 1) measuring the spatial distributions of thermal conditions 2) the thermal sensation vote of residents is taken in order to investigate the relation between thermal condition and human thermal sensation in sedentary condition 3) estimating the neutral floor surface temperatures by measuring floor surface temperatures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1107-1111
• /
• 2009

Flat panel multiview 3D displays developed in recent years have pseudoscopic regions that appear unnatural to viewers. We suggest a new method to suppress the pseudoscopic regions based on the visual characteristics of binocular rivalry. We confirm the validity of this method experimentally and show that the unnaturalness caused by pseudoscopic regions can be effectively suppressed.

• 대한원격탐사학회지
• /
• 제30권3호
• /
• pp.383-397
• /
• 2014

Information technology advances are allowing conventional surveillance systems to be combined with mobile communication technologies, creating ubiquitous monitoring systems. This paper proposes monitoring system that uses smart camera technology. We discuss the dependence of interior orientation parameters on calibration target sheets and compare the accuracy of a three-dimensional monitoring system with camera location calculated by space resectioning using a Digital Surface Model (DSM) generated from stereo images. A monitoring housing is designed to protect a camera from various weather conditions and to provide the camera for power generated from solar panel. A smart camera is installed in the monitoring housing. The smart camera is operated and controlled through an Android application. At last the accuracy of a three-dimensional monitoring system is evaluated using a DSM. The proposed system was then tested against a DSM created from ground control points determined by Global Positioning Systems (GPSs) and light detection and ranging data. The standard deviation of the differences between DSMs are less than 0.12 m. Therefore the monitoring system is appropriate for extracting the information of objects' position and deformation as well as monitoring them. Through incorporation of components, such as camera housing, a solar power supply, the smart camera the system can be used as a ubiquitous monitoring system.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권1호
• /
• pp.15-21
• /
• 2020

This study was purpose to evaluation of Modulation Transfer Function in Measurements by using the International electrotechnical commission standard(IEC 62220-1) which were edge device each angle by using edge method. In this study was Aero(Konica, Japan) image receptor which is a indirect Flat panel detector(FPD) was used. The size of matrix 1994 × 2430 (14"× 17" inch) which performed 12 bit processing and pixel pitch is 175 ㎛. The results of shown as MTF measurements at IEC standard. The amount of data seemed reasonable and at an MTF value of 0.1 the spatial frequencies were 2.56 cycles/mm at an angle of 2.4°. MTF value of 0.5 the spatial frequencies were 1.32 cycles/mm at an angle of 2.4°. This study were to evaluate MTF by setting each angle 2.0°~2.8° degrees the most effective optimal edge angle and to suggest the quantitative methods of measuring by using IEC.