• Journal of the Korean Society of Visualization
• /
• v.1 no.1
• /
• pp.64-74
• /
• 2003

An experimental study was carried out to investigate the effect of periodic blowing and suction on a turbulent boundary layer. Particle image velocimetry (PIV) was used to probe the characteristics of the flow. The local forcing was introduced to the boundary layer via a sinusoidally-oscillating jet issuing from a thin spanwise slot. Three forcing frequencies (f$^{+}$=0.044, 0.066 and 0.088) with a fixed forcing amplitude (A$^{+}$=0.6) were employed at $Re_{=690. The effect of the forcing angles ($\alpha$=60$^{\circ}$ , 90$^{\circ}$ and 120$^{\circ}$ ) was investigated under the fixed forcing frequency (f$^{+}$=0.088). The PIV results showed that the wall region velocity decreases on imposition of the local forcing. Inspection of phase-averaged velocity profiles revealed that spanwise large-scale vortices were generated in the downstream of the slot and persist further downstream. The highest reduction in skin friction was achieved at highest forcing frequency (f$^{+}$=0.088) and a forcing angle of $\alpha$=120$^{\circ}$. The spatial fraction of the vortices was examined to analyze the skin friction reduction.

• Proceeding of KASS Symposium
• /
• 2005.05a
• /
• pp.205-212
• /
• 2005

In order for utilization of the concrete filled tubular, It Is necessary to scrutinize interfacial characteristics between heterogeneous materials, and be performed to various analytical studies on the composite structure. In this paper, this analytic study is carried on using ABAQUS Package/ Version 5.8-1, and the variables aye the relations between the coefficient of friction and the contact pressure for analyzing the behavior on the contact surface, through modifying the analytic methods and improving some problems. It is used to subdivided analytical methods in this research which categorize into four regions and can obtain closer effect for the bond behavior. Four categories compose of the chemical bond and mechanical bond legions replaced the full-interaction before yielding, and the pure friction and moving-down regions after yielding.

• Structural Engineering and Mechanics
• /
• v.12 no.6
• /
• pp.595-614
• /
• 2001

This paper studies the behaviour of a homogeneous cable in a horizontal rigid duct and loaded by an axial compressive force. This behaviour is characterized by spatial buckling modes, named sinusoidal and helical, due to friction and total or partial cable locking. The evaluation of critical buckling loads involved by drilling technology has been studied by many authors. This work presents a new formulation, taking the friction effects into account, for the transmission of the axial load during the postbuckling process. New analytical expressions of pitches in both buckling cases are also given. A life-sized bench is presented, which permits to study the laying of optical fiber cables by squeezing them into an underground duct. Finally, analytical solutions are compared with experimental tests and finite element simulations.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.2
• /
• pp.73-84
• /
• 2008

The various systems as the seismic resistance systems are used to reduce the seismic response of structure. And the seismic isolation system among them is the system that reduces the seismic vibration to be transmitted from foundation to upper structure. The purpose of isolation system is to lengthen the period of structure and make its period shift from the dominant period of earthquake. In this study, the seismic behavior of arch structure with lead rubber bearing(LRB) and friction pendulum system(FPS) is analyzed. The arch structure is the simplest structure and has the basic dynamic characteristics among large spatial structures. Also, Large spatial structures have large vertical response by horizontal seismic vibration, unlike seismic behavior of normal rahmen structures. When horizontal seismic load is applied to the large spatial structure with isolation systems, the horizontal acceleration response of the large spatial structure is reduced and the vertical seismic response is remarkably reduced.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.4 s.6
• /
• pp.53-60
• /
• 2002

An analytic study on the bond stress between steel tube and concrete in concrete filled steel(CFT) rectangular column is presented in this paper. Recently buildings need members which are enhanced durability and ductility. Concrete filled rectangular column system is proposed as alternative plan. In this paper, ABAQUS/Standard Version 5.8 which is identified as usefulness for finite element analysis and has various element library is used. The variables in this study are the location and type of shear-connector. The modeling on contact problem practiced by Contact Pair and Contact Pressure method. In the step of physical bond, it is practiced by Change friction option After yielding of models, analytic results is less than that of experimental results.

• Journal of the Korean housing association
• /
• v.16 no.3
• /
• pp.1-7
• /
• 2005

The purpose of this study was to analyze the relationship of the floor classification and the main-living behavior, and the tendency of using furniture and space by surveying the situations of using An-bang space by apartment dwellers. An-bang is a factor that influences on the unit-plan organization, the whole spatial arrangements, and the spatial relation and size, and has the most severe friction between the tradition and western culture. Given seeing the results shown in the main-living behavior by floor type, that the rest and TV watching were shown to be high in terms of a free-standing type can be said that An-bang is more for the individual rest than far the purpose of family harmony. On the other hand, that the family courtesy was shown to be a little higher a sitting-down type, could be understood that the sitting-down style, which is a traditional living mode, is appearing in An-bang.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.91-98
• /
• 2014

In this investigation, the effect of crack orientation on spatial randomness of fatigue crack growth rate (FCGR) in friction stir welded (FSWed) 7075-T651 aluminum alloy joints has been statistically analyzed by Weibull distribution. The fatigue crack growth tests are conducted under three different constant stress intensity factor range (SIFR) control at room temperature with R = 0.1 and frequency 10Hz on compact tension (CT) specimen machined at base metal (BM) and weld metal (WM). The experimental fatigue crack growth rate data were obtained for two types of specimens having LT and TL orientations. LT specimens both base metal and weld metal showed higher fatigue crack growth rate as compared to TL specimens. In the lower SIFR region, FCGR were found to be almost 3 times higher in higher SIFR region. The shape parameter of Weibull both LT and TL orientation for FCGR was increased with increasing SIFR, the scale parameter was also increased with increasing SIFR. The smallest value of the shape parameter was shown in weld metal specimens having LT orientation at lower SIFR region.

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.100-109
• /
• 2016

This study suggests three spatial distribution functions of strength parameters, which can be adopted in the derivation of failure conditions for transversely isotropic rocks. All three proposed functions, which are the oblate spheroidal function, the exponential function, and the function based on the directional projection of the strength parameter tensor, consist of two model parameters. With assumption that the cohesion and friction angle can be described by the proposed distribution functions, the transversely isotropic Mohr-Coulomb criterion is formulated and used as a failure condition in the simulation of the conventional triaxial tests. The simulation results confirm that the failure criteria incorporating the proposed distribution functions could reproduce the general trend in the variations of the axial stress at failure and the directions of failure planes with varying inclination of the weankness planes and confining pressure. Among three distribution functions, the function based on the directional projection of the strength parameter tensor yields the highest axial strength, while the axial strength estimated by the oblate spheroidal distribution function is the lowest.

• Journal of Korean Society of Forest Science
• /
• v.80 no.3
• /
• pp.317-325
• /
• 1991

Route projection of forest road involves several constraints ranging from construction cost to environmental impacts. This study is designed to assess the capability of computer-assisted map analysis techniques for deriving several alternatives of forest road planning. Three cartographic models are presented to address the limit of slope, soil erosion, and aesthetic value in designing forest roads over a relatively small size of mountainous forest. Primary spatial analysis techniques used are distance measurements and connectivity analysis. The fundamental approach used was to generate a set of friction maps in which each friction map represents a combined restriction for a forest road projection. Products of the spatial analysis are compared by both qualitative and quantitative methods. The results demonstrate that computer-assisted map analysis has a potential to solve rather complex problems of forest road planning by providing several alternatives effectively.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.293-306
• /
• 2013

According to the increase of rural experience, that is important in satisfying needs of green tourism and vitalizing rural economy to use closed school in rural area as experience facility. For using closed school as experience facility, political and institutional assistants are needed in effective equipments and stable operation based on multi-perspective approach and analysis. In this study, we try to evaluate green-tourism accessibility of rural experience facility remodeled from closed school considering regional population and spatial characteristics. In evaluating process, gravity potential model are adapted with considering group size of customer and distance-friction coefficient. Distance-friction coefficient is a function of user restriction which depend on possible activity in each experience facility. Green tourism accessibility of experience facility is calculated with summation of accessibility to each region, and we analyzed it as a group by closed school type and location with application in Chungcheongnam-do. We found a correlation between green tourism accessibility of rural closed school and their income.