• 한국지리정보학회지
• /
• 제15권3호
• /
• pp.13-22
• /
• 2012

기존의 공간구문론(Space Syntax)을 활용한 공간구조분석(Spatial Structure Analysis)은 가로망(road)에 관한 인자(factor)만을 활용하는 한계를 가지고 있기에, 가로망 인자만이 아닌 지역의 지역적 특성을 고려한 인자를 도출한 현실성 있는 공간구조 분석 방법이 필요한 실정이다. 본 연구는 지역의 공간구조 특성인자를 도출하여 기존의 공간구문론과 GIS와의 통합모델을 구축하여 수정형 공간구조분석 방법을 제시하고 합덕읍 일원의 중심지역을 대상으로 공간구조 분석을 수행하는데 목적이 있다. 이를 위해 전문가 설문조사를 실시하여 지역의 공간구조 특성요인 및 상대적 가중치를 도출하였고, 지역적 특성을 반영하는 인자로 가로망 뿐만 아니라 용도지역, 지가, 건물의 밀집도 요인을 도출하였다. 분석 결과 합덕읍의 경우 도로만을 이용한 기존의 공간구조분석을 활용한 공간구조분석 방법이 실제적인 값을 반영하지 못한 것으로 분석되었고, 지역적 특성 인자를 추가하여 분석한 수정형 공간구조분석 결과가 합덕읍의 현실성을 잘 반영한 것으로 나타났다. 즉, 합덕읍과 같은 경우 개발 축에 따라 가로망이 변화되고 중심성이 변화되는 지역이 아니라, 효율성과 형평성에 의해 가로망이 형성되거나 쇠퇴로 인해 중심성이 변화된 지역이기에 이러한 지역의 경우 지역적 특성을 반영한 방법이 더 적합한 것으로 분석되었다. 향후 지역적 특성을 반영한 공간구조분석 인자 선정 및 파라미터 선정에 관한 더 깊은 연구가 필요하고 다른 지역을 대상으로 시뮬레이션하여, 모델에 대한 상호 검증 및 보완하는 과정이 필요할 것이다.

• Spatial Information Research
• /
• 제10권2호
• /
• pp.233-246
• /
• 2002

본 연구에서는 GIS의 공간통계분석을 활용하여 지가 연구에 일반적으로 활용되고있는 특성가격모형에서 입지적 특성이 갖는 영향력을 계량적으로 설명하기 위한 분석방법을 제시하였다. 여기에는 GIS 공간분석방법 가운데 중첩과 내삽 기능을 이용한 공간자료의 처리 과정이 포함되었다. 사례연구를 위해 동대문구 회기동의 1421개 개별지가에서 54개 표준지들을 추출하여 표준지의 중심좌표를 구하고, 이 벡터 자료점들과 공간적 관련성에 기초하여 조사되지 않은 지점의 지가 예측값을 확률적으로 평가할 수 있는 크리깅 분석방법을 적용하였다. 특히 이러한 분석 과정에서 변동도를 통해 분석한 공간적 자기상관관계는 공간 의존성의 형성과정을 추정할 때 장점이 있음을 밝혔다.

• 한국공간구조학회논문집
• /
• 제7권1호
• /
• pp.87-94
• /
• 2007

구조물의 경제성 분석은 그 프로젝트의 실행을 결정할 수 있는 중요한 요소이다. 본 논문에서는 대공간구조물의 경제성 분석을 위하여 기존에 건설된 대공간 구조물(제주 월드컵 경기장)의 건설비용을 분석하여 경제성 분석 모델의 구축을 위한 기초 자료를 제공하고자 하였다.

• 지반과기술
• /
• 제3권3호
• /
• pp.15-22
• /
• 2006

The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost, which is generally estimated according to rock fragmentation. Therefore, it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data. The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground level are provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

• 한국디지털건축인테리어학회논문집
• /
• 제12권1호
• /
• pp.71-79
• /
• 2012

This study aims at finding relationships between the competitiveness of cities and the size or distance of them, based on some premises; (1) the competitiveness can be measured on the interval-ratio level, that is, factor scores, (2) a hypothesis that the spatial interaction model is valid for the relationships can be generally accepted. Based on the general recognition a research hypothesis that the more is the population or the nearer is the distance from a central city the higher is the competitiveness score is constructed. According to the premises 5-factor scores and composite score are calculated by means of regression method, and the scores are regressed on cities' populations and distances from Seoul city. Using bootstrapping method for the tests of significance is effective due to small sample of 21 cities. Results of the analyses show that most aspects of the hypothesis should be rejected or adjusted. Scores on Health-welfare factor, public service factor, and commercial vitality factor have no relation to the cities' sizes or distances. But the results also find the facts that the strong (negative) relationships exist between (1) educational base factor score and population, (2) density factor score and distance. Although this study improves systematic and analytic understanding of spatial interaction patterns, the understanding should be invalid for the general context because it has used the data on 21 cities in the capital region at the time of 2009.

• 대한공간정보학회지
• /
• 제17권1호
• /
• pp.141-147
• /
• 2009

상점의 정보, 서비스업 등을 영위하기 위한 공간입지에 대한 정보(인구생태학적 변수, 사회생태학적 변수)의 탐색적 자료 분석을 위해 공간 특성분석이 필요하다. 따라서 본 연구에서는 지리적 공간상에서 공간객체간의 상호의존성과 상호작용과 통계적 상관분석을 이용하여 서비스업종간의 상관분석법을 제시하고자 하며, 또한 근린상권의 업종 간 상관관계분석의 도출을 통하여 공간특성에 대한 분석을 하기 위함이다.

• 신재생에너지
• /
• 제7권1호
• /
• pp.22-28
• /
• 2011

The surface solar radiations were calculated and analyzed with spatial resolutions (4 km and 1 km) using by GWNU (Gangneung-Wonju National University) solar radiation model. The GWNU solar radiation model is used various data such as aerosol optical thickness, ozone amount, total precipitable water and cloud factor are retrieved from Moderate Resolution Imaging Spectrometer (MODIS), Ozone Monitoring Instrument (OMI), MTSAT-1R satellite data and output of the Regional Data Assimilation Prediction System(RDAPS) model by Korea Meteorological Administration (KMA), respectively. The differences of spatial resolutions were analyzed with input data (especially, cloud factor from MTSAT-1R satellite). And the Maximum solar radiation by GWNU model were found in Andong, Daegu and Jinju regions and these results were corresponded with the MTSAT-1R cloud factor.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.32-41
• /
• 2012

In recent times, multi-centralization and decentralization as well as large Capital area and suburbanization in the spatial structure of capital area. With rapid growth, urbanization and industrialization are unsystematic, and growth inequality between regions caused negative effects such as discordant centralization and decentralization, fluctuating land value, and gap between living conditions. Accordingly, this study analyzed urban spatial indexes by the self-governed body in the capital area such as Seoul, Incheon, and Gyeonggi province for the analysis of the regional inequality phenomenon. We examined the characteristics of temporal and spatial changes in urban spatial structure in the capital area by utilizing the distribution pattern and density of city indexes such as population, employment, etc, and then drew the commonality of those factors through factor analysis. We evaluated the drawn results through the city standard index by each city, conducted factor score analysis, and identified the interaction between each factor and Housing Purchase Price Composite Indices index, housing rent price index(Housing Jeonse Price Composite Indices), land price fluctuation rate, diffusion ratio of house, and financial independence.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3488-3493
• /
• 2022

Accelerator driven subcritical systems have long been discussed as facilities which can be used for solving the nuclear waste problem. The physics of these systems is very different from conventional reactors and new techniques had to be developed for reactivity monitoring. One such technique is the Area Ratio Method which studies the response of a subcritical system upon insertion of a large number of neutron pulses. An issue associated with this technique is the spatial dependence of measured reactivity which is intrinsic to the sub criticality of the system since the reactor does not operate on the fundamental mode and measured reactivity depends on the detector position. This is generally addressed by defining Bell-Glasstone spatial correction factor. This factor upon multiplication with measured reactivity gives the correct reactivity which is independent of detector location. Monte Carlo Methods are used for evaluating these factors. This paper presents a complete three dimensional map of spatial correction factors for BRAHMMA subcritical system. In addition, the dataset obtained also helps in identifying detector locations where the correction factor is close to unity, thereby implying no correction if the detector is used at those locations.

• 한국환경과학회지
• /
• 제21권3호
• /
• pp.297-303
• /
• 2012

Slope is the geographic factor reflecting the 3-dimensional features of basin and it can be considered as the important geomorphological factor which governs the morphology of basin and the dynamics of water movement. In this study the approach to the 3-dimensional structures of basin is attempted with statistical analysis of local slope which can be defined and measured in easy and objective manner by means of DEM. As a result local slope is confirmed to be a highly variable spatial factor in basin. And distribution map of local slope based on spatial autocorrelation length in this study would be a useful tool in the further research of hydrology and geomorphology.