• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1205-1208
• /
• 2005

By adding user interface to the usual router, an improved functional router is implemented in this paper. Due to the massive amount of spatial data processing, spatial information processing area has been rapidly grown up in recent years based on powerful computer hardware and software development. Spatial index structures are the core engine of geographic information system(GIS). Analyzing and processing of spatial information using GIS has a lot of applications and the number application will be increased in the future. However, study on the under ground is in its infancy due to invisible characteristic of this information. This paper proposes the sub-surface fault detection system using the sub-surface layer information gathered from elastic wave. Detection of sub-surface fault provides very important information to the safety of above and sub-surface man made structures. Development of sub-surface fault detection system will serve as a pre-processing system assisting the interpretation of the geologist.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.269-272
• /
• 2009

The environment of Ubiquitous in terms of improvement is being expanded to various fields and time enabled system. Thus, a real-time spatial information management system has been developed by integrating a human movement detection system into a SICS(Spatial Information Control System) engine that can integrally manage inside spatial information extracted from 3D CAD and outside spatial information of GIS. The add-on program was developed to extract spatial information necessary for the SICS engine from 3D CAD information, and a human movement detection system was developed. Test bed was operated for 2weeks and indoor human flow information was found out by zone. Also, the direction of future research was decided through a test bed.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1099-1101
• /
• 2003

Change detection technology, which discovers the change information on the surface of the earth by comparing and analyzing multi-temporal satellite images, can be usefully applied to the various fields, such as environmental inspection, urban planning, forest policy, updating of geographical information and the military usage. In this paper, we introduce a change detection system that can extract and analyze change elements from high-resolution satellite imagery as well as low- or middle-resolution satellite imagery. The developed system provides not only 7 pixelbased methods that can be used to detect change from low- or middle-resolution satellite images but also a float window concept that can be used in manual change detection from highresolution satellite images. This system enables fast access to the very large image, because it is constituted by OGC grid coverage components. Also new change detection algorithms can be easily added into this system if once they are made into grid coverage components.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1149-1161
• /
• 2021

With a trend of the utilization of computer vision for satellite images, cloud detection using deep learning also attracts attention recently. In this study, we conducted a U-Net cloud detection modeling using SPARCS (Spatial Procedures for Automated Removal of Cloud and Shadow) Cloud Dataset with the image data augmentation and carried out 10-fold cross-validation for an objective assessment of the model. Asthe result of the blind test for 1800 datasets with 512 by 512 pixels, relatively high performance with the accuracy of 0.821, the precision of 0.847, the recall of 0.821, the F1-score of 0.831, and the IoU (Intersection over Union) of 0.723. Although 14.5% of actual cloud shadows were misclassified as land, and 19.7% of actual clouds were misidentified as land, this can be overcome by increasing the quality and quantity of label datasets. Moreover, a state-of-the-art DeepLab V3+ model and the NAS (Neural Architecture Search) optimization technique can help the cloud detection for CAS500 (Compact Advanced Satellite 500) in South Korea.

• Korean Journal of Remote Sensing
• /
• v.39 no.1
• /
• pp.77-86
• /
• 2023

Ship detection is widely used in areas such as maritime security, maritime traffic, fisheries management, illegal fishing, and border control, and ship detection is important for rapid response and damage minimization as ship accident rates increase due to recent increases in international maritime traffic. Currently, according to a number of global and national regulations, ships must be equipped with automatic identification system (AIS), which provide information such as the location and speed of the ship periodically at regular intervals. However, most small vessels (less than 300 tons) are not obligated to install the transponder and may not be transmitted intentionally or accidentally. There is even a case of misuse of the ship'slocation information. Therefore, in this study, ship detection was performed using high-resolution optical satellite images that can periodically remotely detect a wide range and detectsmallships. However, optical images can cause false-alarm due to noise on the surface of the sea, such as waves, or factors indicating ship-like brightness, such as clouds and wakes. So, it is important to remove these factors to improve the accuracy of ship detection. In this study, false alarm wasreduced, and the accuracy ofship detection wasimproved by removing wake.As a ship detection method, ship detection was performed using machine learning-based random forest (RF), and convolutional neural network (CNN) techniquesthat have been widely used in object detection fieldsrecently, and ship detection results by the model were compared and analyzed. In addition, in this study, the results of RF and CNN were combined to improve the phenomenon of ship disconnection and the phenomenon of small detection. The ship detection results of thisstudy are significant in that they improved the limitations of each model while maintaining accuracy. In addition, if satellite images with improved spatial resolution are utilized in the future, it is expected that ship and wake simultaneous detection with higher accuracy will be performed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1722-1724
• /
• 2015

This paper proposes a partial detection scheme using QRD-M, DFE, and iterative schemes for efficiency in terms of detection performance and complexity in a MIMO-OFDM system. The proposed scheme detects signals by using the different detection methods in according to spatial stream. In the proposed scheme, QRD-M with high detection performance and high complexity is used in spatial stream that requires low complexity, and DFE with low detection performance and low complexity is used in spatial stream that requires high complexity. Also, the iterative detection is performed in the detected spatial stream by using DFE. From the simulation, it is confirmed that although proposed scheme has increased complexity, detection performance is greatly improved by the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.229-237
• /
• 2010

The conventional detection methods developed for spatially-multiplexed MIMO systems such as OSIC and QRD-M show performance difference for each user depending on the order of detection when they are applied to detection of multi-user signals in uplink multiuser systems based on collaborative spatial multiplexing. In this paper, a signal detection method for uplink multiuser systems based on collaborative spatial multiplexing is proposed to provide similar performance for each user while its performance is close to the case of ML detection. Compared with QRD-M method, computational complexity of the proposed signal detection method is similar in the case of QPSK, and significantly lower in the case of high modulation order with 16-QAM and 64-QAM.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.275-284
• /
• 2023

Land monitoring involves systematically understanding changes in land use, leveraging spatial information such as satellite imagery and aerial photographs. Recently, the integration of deep learning technologies, notably object detection and semantic segmentation, into land monitoring has spurred active research. This study developed a web service to facilitate such integrations, allowing users to analyze aerial and drone images using CNN models. The web service architecture comprises AI, WEB/WAS, and DB servers and employs three primary deep learning models: DeepLab V3, YOLO, and Rotated Mask R-CNN. Specifically, YOLO offers rapid detection capabilities, Rotated Mask R-CNN excels in detecting rotated objects, while DeepLab V3 provides pixel-wise image classification. The performance of these models fluctuates depending on the quantity and quality of the training data. Anticipated to be integrated into the LX Corporation's operational network and the Land-XI system, this service is expected to enhance the accuracy and efficiency of land monitoring.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1727-1737
• /
• 2018

In this paper, we propose a system to detect spatial structures in land cover maps and to detect time-series spatial structure changes. At first, the proposed system detects patches in a certain area at different times and calculates their measures to analyse spatial structure patterns of the area. Then the system conducts patch mapping among the detected time-series patches and decides 6 types of patch changes such as keeping, creating, disappearing, splitting, merging, and changing in a mixed way. Also, the system stores the patch-based spatial structure patterns of time-series land cover maps in binary form to extract changes. This demonstrated that the proposed change detection system can be used as a basis for planning the reconstruction of the urban spatial structure by measuring the degree of urban sprawl.

• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.145-150
• /
• 2004

In this study for the prosthesis of the spatial and directional sensation for the blind, an ultrasonic scale system and an electronic compass system were developed. The ultrasonic scale utilizes 40 ㎑ sound for the detection of distance to the barrier and the spatial information is transferred to the blind by various sound interval, which is proportional to the distance. The electronic compass utilizes a magnetoresistor bridge for the detection of the magnetic field strength of earth in horizontal plane. The information for the direction of the earth's north is transferred by tactile stimuli by a vibrating motor band around upper head. Detection distance of the ultrasonic scale is ranged from 0.065 to 3.26 meters, and the detection angle resolution of the electronic compass is about 22.5 degrees. The integrated system of the ultrasonic scale and the electronic compass was developed. Distance information is converted to the location of the tactile stimulation along the clockwise direction by a vibrating motor according to the distance installed around upper head of the blind. The intent of this article is to provide an practical prosthetic tool of spatial and directional sensation for the blind. Daily practice of this system will improve the usefulness of this system.