• Industrial Engineering and Management Systems
• /
• v.6 no.1
• /
• pp.40-48
• /
• 2007

This study investigated the optimum positions and warning foreperiod for auditory signals with an experiment on spatial stimulus-response (S-R) compatibility effects. The auditory signals were presented at the front-right, front-left, rear-right, and rear-left positions from the subjects, whose reaction times and accuracies at different spatial mapping conditions were examined. The results showed a significant spatial stimulus-response compatibility effect in which faster and more accurate responses were obtained in the transversely and longitudinally compatible condition while the worst performance was found when spatial stimulus-response compatibility did not exist in either orientation. It was also shown that the transverse compatibility effect was found significantly stronger than the longitudinal compatibility effect. The effect of signal position was found significant and post hoc test suggested that the emergent warning alarm should be placed on the front-right position for right-handed users. The warning foreperiod prior to the signal presentation was shown to influence reaction time and a warning foreperiod of 3 s is found optimal for the 2-choice auditory reaction task.

• Journal of Korean Society of Rural Planning
• /
• v.4 no.1
• /
• pp.15-21
• /
• 1998

The purpose of the study is to identify a basic spatial unit for rural village redevelopment plan. An ideal spatial unit need to satisfy three basic premises: to be homogeneous as rural community, to be appropriate to implement the project, and to be compatible with regional planning systems. A spatial unit could, empirically, be defined based on the homogeneity at first, and then appropriateness and compatibility could be used to adjust its boundary. Mitan-Myun(13 villages), Pyungchang County, Dochuck-Myun(15 villages), Kwangju County, and Chuksan-Myun(28 villages), Kimje City in Korea were selected as case study areas. The degree of interrelationship between all possible pairs in each Myun was measured using spatial, socio-cultural, and economic indicators. Multidimensional Scaling(MDS) was used to identify a homogeneous spatial unit, and then indicators representing appropriateness and compatibility were used to adjust the identified boundary. New districts which have two or three villages were suggested as a reasonable spatial unit for rural village redevelopment, and its boundary roughly overlaps with Bup-Jeong-Ri(法定里: a legally defined village).

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.355-363
• /
• 2014

Objective:The purpose of this study is to design a three-set type (Sebulsik) keyboard that is to input Korean text with no shifted keys and also compatible with the standard Korean computer keyboard or ANSI keyboard. Background: The KS computer keyboard is two-set type (Dubulsik). Existing and proposed designs of three-set type of past studies are not compatible with KS or ANSI keyboard and are complex with many redundant letters. Method: The number of Korean letters for 3-set type is analyzed. Then Korean letters are arranged with normality and with spatial compatibility to the KS Korean keyboard, and symbols were arranged to same positions with ANSI keyboard. Results: Initial consonants of 14 numbers and 6 vowels are arranged as exactly same positions of KS keyboard, and other vowels are arranged with spatial compatibility. Symbols are arranged to the same positions with ANSI keyboard, and 10 digits are confirmed and has compatibility to International standard. Conclusion: A 38-key model, 38K, is designed to require minimal keys to input Korean text with no shifted keys, increased the compatibility to the KS Korean computer keyboard. Application: Using the proposed 38-key model, 38K, it can be taken into account for keyboards in industrial production. It is applicable to user group of 3-set type Korean keyboard with more easy than past keyboards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.799-808
• /
• 2016

The IEEE 802.15.7r1 Task Group (TG7r1), known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems which mainly use either image sensors or cameras, is of interest in this paper. The vast challenge in Image Sensor Communications (ISC), as it has been addressed in the Technical Consideration Document (TCD) of the TG7r1, is the Image Sensor Compatibility to support the variety of different commercial cameras available on the market. The on-going ISC standard must adhere to compatible image sensors regulations. This paper brings an inside review of the TG7r1 and an inside look of related works on Image Sensor Communications. The paper analyzes the compatibility features by introducing a revised model of receiver to explain how those features are necessary. One of the most challenging but interesting features is the capability in being compatible to camera frame rates. The variation of camera frame rate is modeled from verified experimental results. Noticeably, three singular approaches to support frame rates compatibility, including temporal approach, spatial approach, and frequency-domain approach, are proposed on the paper along with concise definitions. Those schemes have been presented as valuable proposals on the call-for-proposal meeting series of the TG7r1 recently.

• ETRI Journal
• /
• v.31 no.4
• /
• pp.365-375
• /
• 2009

In this paper, a terrestrial digital multimedia broadcasting (T-DMB) multichannel audio broadcasting system based on spatial audio coding is presented. The proposed system provides realistic multichannel audio service via T-DMB with a small increase of data rate as well as backward compatibility with the conventional stereo-based T-DMB player. To reduce the data rate for additional multichannel audio signals, we compress the multichannel audio signals using the sound source location cue coding algorithm, which is an efficient parametric multichannel audio compression technique. For compatibility, we use the dependent property of an elementary stream descriptor, and this property should be ignored in a conventional T-DMB player. To verify the feasibility of the proposed system, we implement the T-DMB multichannel audio encoder and a prototype player. We perform a compatibility test using the T-DMB multichannel audio encoder and conventional T-DMB players. The test demonstrates that the proposed system is compatible with a conventional T-DMB player and that it can provide a promisingly rich audio service.

• Journal of Information Technology and Architecture
• /
• v.11 no.4
• /
• pp.441-448
• /
• 2014

The application of spatial information has drawn significant attention from a wide range of industries. Railway spatial information facilitates the cooperation among related parties and improves the efficiency of asset management and operations. This study proposes the structure of Railway Object IDentifier(ROID) on railway spatial information. Current facility management and train operation are based on relative positioning system. Despite many advantages, relative positioning system causes serious problems such as the entire reconfiguration of positioning in the case of line change. Another major concern is the interface compatibility between individual facilities with different relative positioning. ROID based on absolute positioning addresses these issues, allowing the information exchange and convergence between independent parties. This study proposes ROID based on OID standard with object IDentifier and service object-oriented reference system. Our ROID employs the absolute positioning and the unique identifier, maintaining the compatibility with existing management system.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.2
• /
• pp.47-54
• /
• 2016

The objective of this study is to propose the principle and method of the spatial system modification for the compatibility of habitability and tourism convenience in cultural property villages. Based on the field survey on tourists' routes, activities and their durations in Oeam-maeul, the problems of conflict, between habitability/residents and tourism/tourists, and their causes are analyzed. And the modification principle and method of spatial system is proposed as follows; The basic principle of the spatial system modification is to respect the traditional hierarchy in village roads, between the main road and sub-roads, and the territoriality of settlement space that is typically differentiated as the social, individual, and ceremonial domains, from the front to rear part of settlement. With this principle, it is recommended to restrict the tour route to one that is composed of the main road and the periphery road of housing area, and some connecting sub-roads. based on the surveyed tourists's routes. And it is suggested that the tourist facilities, whether they are existing houses or newly built buildings, and the tourist programs are necessary for experience tourism to cultural property villages, and they are proposed to be placed along the restricted tour route.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.197-209
• /
• 2020

Signboards are installed in different types and sizes depending on the shop characteristics. However, the local government is having difficulty managing signboards with frequent opening and closing of stores and insufficient management personnel. In this study, a methodology was proposed to standardize and efficiently manage signboard information. To this end, the signboard display method of the enforcement ordinance related to outdoor advertising was analyzed to define the attribute elements of standard signboard data. In addition, physical information of signboards was obtained through signboard recognition technology, which is a prior study, and attribute elements of signboard standard data were defined through information that can be read with the naked eye, building integration information of the Ministry of the Interior and Safety, and street name address. In order to standardize the signboard information by spatial characteristics, data product specifications and metadata were defined according to the national spatial information standard. Lastly, standard data for signboards were produced in XML (Extensible Markup Language) format for compatibility, and XSD (XML Schema Definition) was defined for XML integrity so that data validity could be verified. Through this, a standard data model for the informatization of signboards was designed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.96-105
• /
• 2018

The V-world, Spatial information open platform map service, provides various national spatial data. Recently, with the development of IT technology, demand for 3D geospatial data that can be merged with new industries such as Internet of Things(IoT) and autonomous vehicles is increasing. Because 3D geospatial data is large and complex, many computer resources are used to provide map services. Most of the 3D map services, such as Vworld, are constructed binary data in consideration of performance. However, this type of data is incompatible because it is difficult to use in other services if there is no precise understanding of the specification. In this paper, we propose a data serialization method to improve the compatibility of new Vworld 3D format which is constructed in binary form. The performance of binary data and serialized binary data is tested and compared. As a result, it is expected that the data using the serialization technique will be similar to the binary data and contribute to improve compatibility.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.47-58
• /
• 2008

With the recent development of the ubiquitous computing technology, there are increasing interest and research in technologies such as sensors and RFID related to information recognition and location positioning in various ubiquitous fields. Especially, a standard specification was required for compatibility and interoperability in various RTLS(Real-Time Locating Systems) according to the development of RTLS to provide location and status information of moving objects using the RFID Tag. For these reasons, the ISO/IEC published the RTLS standard specification for compatibility and interoperability in RTLS. Therefore, in this paper, we designed and im plemented RTLS based on the spatial DSMS(Data Stream Management Stream) for efficiently managing and searching the incoming data stream of moving objects. The spatial DSMS is an extended system of STREAM(STanford stREam datA Manager) developed by Standford University to make various spatial operations possible. RTLS based on the spatial DSMS uses the SOAP(Simple Object Access Protocol) message between client and server for interoperability and translates client's SOAP message into CQL(Continuous Query Language) of the spatial DSMS. Finally, we proved the efficiency of RTLS based on the spatial DSMS by applying it for the staff location management service.