• 제목/요약/키워드: spare time

검색결과 243건 처리시간 0.024초

데이터 마이닝을 이용한 패트리어트 수리부속의 간헐적 수요 예측에 관한 연구 (A Study on Intermittent Demand Forecasting of Patriot Spare Parts Using Data Mining)

  • 박천규;마정목
    • 한국산학기술학회논문지
    • /
    • 제22권3호
    • /
    • pp.234-241
    • /
    • 2021
  • 군에서는 수요예측에 대한 중요성을 인식하여 수리부속에 대해 예측 정확도 향상을 위한 많은 연구가 이루어지고 있다. 수리부속 수요예측은 예산 운영과 장비 가동률 측면에서 매우 중요한 요소가 되고 있다. 그러나 현재 군에서 적용중인 시계열 모형으로는 수요량의 변동과 발생주기가 일정하지 않은 간헐적 수요에 대해서는 예측에 한계가 있는 실정이다. 따라서, 본 연구는 공군 패트리어트 수리부속의 간헐적 수요에 대한 예측 정확도를 제고하는 방법을 제시하고자 하였다. 이를 위해서 2013년부터 2019년까지의 701개의 수리부속 소모개수를 토대로 수요 유형을 구분하여 수리부속의 간헐적 수요 자료를 수집하였다. 또한, 장비 고장에 영향을 줄 수 있는 외부 요인으로는 기온, 장비운영시간을 식별하여 입력변수로 선정하였다. 그 후, 소모개수와 외부 요인을 통해 군에서 적용하는 시계열 모형과 제안하는 데이터 마이닝 모형으로 예측을 실시하여 모형별 예측 정확도를 판단했다. 예측 결과로 기존의 시계열 모형과 비교하여 데이터 마이닝 모형의 예측 정확도가 높았으며, 그 중 다층 퍼셉트론 모형이 가장 우수한 성능을 보였다.

데이터 마이닝 기반의 수리부속 수요예측 연구 (A Study on Forecasting Spare Parts Demand based on Data-Mining)

  • 김재동;이한준
    • 인터넷정보학회논문지
    • /
    • 제18권1호
    • /
    • pp.121-129
    • /
    • 2017
  • 수리부속 수요예측은 장비가동률 향상과 국방 운영 예산 효율화 제고를 위한 국방 군수 분야의 핵심 과제 중 하나이다. 현재 우리군은 수리부속 소요 데이터를 활용한 시계열 기법으로 과거 데이터 분석을 통해 수리부속 수요예측에 활용하고 있으나 정확도 제고에 지속적인 노력이 요구되고 있는 실정이다. 이에 본 연구에서는 지난 5개년의 수리부속 18,476개 품목의 수요데이터를 수집하고 데이터마이닝 기법을 활용한 수리부속 수요예측 모델을 제안하였다. 제안한 모델에 따른 실험 결과는 기존 시계열 기법에 비해 개선된 수요예측 정확도를 보였다.

동류전용과 수리부속 부족을 고려한 복수의 시스템에 대한 선택적 정비 최적화 (Optimization of the Selective Maintenance under Plural Systems Considering Shortage of Spare Parts and Cannibalization)

  • 이장원;김수환
    • 산업경영시스템학회지
    • /
    • 제45권4호
    • /
    • pp.187-198
    • /
    • 2022
  • This paper addresses the maintenance optimization problem in multi-component systems in which parts are connected in series, carrying out several missions interspersed with scheduled finite breaks. Due to limited time or resources, maintenance actions can be only carried out on a limited set of components. The decision maker then has to decide which components to maintain to ensure a pre-specified performance level during next mission. Most of the existing models in the literature usually assume only one system and enough spare parts. However, there are situations in which maintenance is required for multiple systems of the same type. To overcome this restrictive assumption, this study optimizes the maintenance problem considering the lack of repair parts and cannibalism for many identical systems. This study presents two optimization models with different objectives to solve the problem and analyzes the results so that the decision maker can decide. The results of this study are expected to be used for the maintenance of multiple systems of the same type, such as swarm drones.

실버 세대를 위한 체감형 자전거 게임 콘텐츠 개발 (Prototype Tangible Bicycle Game Contents for the Silver Generation)

  • 한윤석;김은석;이현철;김범석;주재홍;허기택
    • 한국콘텐츠학회논문지
    • /
    • 제9권8호
    • /
    • pp.166-177
    • /
    • 2009
  • 의학 기술의 발달과 저 출산 현상으로 인구의 고령화가 진행되어감에 따라, 실버세대를 위한 다양한 문화와 산업이 대두되고 있다. 실버 세대는 상대적으로 많은 여가시간을 보내기 위해 다양한 사회 활동과 문화 콘텐츠를 경험하길 원하지만, 노령화에 따른 신체적 심리적 정신적 기능 저하로 인해 제약이 따르게 된다. 본 논문에서는 실버 세대들이 사회활동에서 가장 필요로 하는 이동성 확보에 도움이 되는 하체 단련과 체력 증진 기능을 갖춘 체감형 자전거 게임 콘텐츠를 제안한다. 제안된 게임 콘텐츠는 실버세대에게 익숙한 자전거라는 기구를 이용하여 노인들에게 적합한 게임 구성과 디자인을 통해 게임에 대한 흥미를 유발시킬 수 있다. 노인들은 게임의 몰입감을 증대시키기 위해 개발된 체감형 인터페이스와 실시간 3D 그래픽스 디스플레이를 통해 놀이와 운동을 동시에 즐기며 여가시간을 활용할 수 있다.

Efficient and Low-Cost Metal Revision Techniques for Post Silicon Repair

  • Lee, Sungchul;Shin, Hyunchul
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권3호
    • /
    • pp.322-330
    • /
    • 2014
  • New effective techniques to repair "small" design errors in integrated circuits are presented. As semiconductor chip complexity increases and the design period becomes tight, errors frequently remain in a fabricated chip making revisions required. Full mask revision significantly increases the cost and time-to-market. However, since many "small" errors can be repaired by modifying several connections among the circuit blocks and spare cells, errors can frequently be repaired by revising metal layers. Metal only revision takes significantly less time and involves less cost when compared to full mask revision, since mask revision costs multi-million dollars while metal revision costs tens of thousand dollars. In our research, new techniques are developed to further reduce the number of metal layers to be revised. Specifically, we partition the circuit blocks with higher error probabilities and extend the terminals of the signals crossing the partition boundaries to the preselected metal repair layers. Our partitioning and pin extension to repair layers can significantly improve the repairability by revising only the metal repair layers. Since pin extension may increase delay slightly, this method can be used for non-timing-critical parts of circuits. Experimental results by using academia and industrial circuits show that the revision of the two metal layers can repair many "small" errors at low-cost and with short revision time. On the average, when 11.64% of the spare cell area and 24.72% of the extended pins are added to the original circuits, 83.74% of the single errors (and 72.22% of the double errors) can be corrected by using two metal revision. We also suggest methods to use our repair techniques with normal commercial vender tools.

콘텐츠 개발을 위한 실버세대의 여가활동 분석에 관한 연구 (On Analysis of Silver Generation Leasure Life Activities for Contents Development)

  • 조석봉;변승환
    • 한국콘텐츠학회논문지
    • /
    • 제8권8호
    • /
    • pp.81-89
    • /
    • 2008
  • 의학의 발전과 저출산 현상이 발생하면서 우리 사회는 고령화 시대로 접어들고 있다. 이에 따라 노년의 인구가 점차 증가하고 이는 점차 사회적 문제가 되고 있다. 실버세대를 위한 여가 활동을 위한 필요성이 증가하고 있는 것이다. 본 논문에서는 먼저 실버세대들의 여가활동 유형을 분석해 보았다. 먼저 60세 이상의 연령에서는 TV 시청과 휴식 수면이 가장 높은 여가 활동유형으로 나타났으며, 컴퓨터의 사용에 대한 응답률이 낮지만, 인터넷에 익숙한 $40^{\sim}50$ 세대가 노인층으로 진입할 경우 그 응답률이 높은 것으로 예측되었다. 둘째, 이러한 $40^{\sim}50$대가 노인층으로 진입할 경우 이들을 위한 노인용 유망 멀티미디어 콘텐츠를 예측해 보았다.

에너지 절약을 위한 선두열차군의 구원에 의한 지연회복 (A Study on the Recovery of Delay Time According to the Relief of Precedent Trains for Energy Savings)

  • Kim, Yang mo
    • 대한전자공학회논문지
    • /
    • 제25권6호
    • /
    • pp.629-636
    • /
    • 1988
  • The reduction of recovery time for delay, in the train movements, is generally realized through train operations in the shortest running time and it leads to maximum energy consumption. At the region of this shortest running time, the amount of energy consumption is sharply reduced according to the running time. So the effect for the energy savings can be largely obtained by furnishing a little spare time on train operations. In this paper, it has been modelized the delay and it's enlargement phenomena and formualted the relief patterns in order to restore the delay by restraint and relief of precedent traints. Also it has been proved the number of relief trains for minimum energy consumption exists and then represented one example of relief patterns.

  • PDF

On weakly associative BCI-algebras

  • Wang, Y.Q.;Wei, S.N.;Jun, Y.B.
    • 대한수학회논문집
    • /
    • 제11권3호
    • /
    • pp.601-611
    • /
    • 1996
  • In this paper, we introduce the notion of weakly associative BCI-algebras and investigate structure of it. Some of characterizations of elements of the quasi-associative part Q(X) of a BCI-algebra X are shown.

  • PDF

신이 주신 악기 : 목소리 (Divine Instrument : Voice)

  • 김한수
    • 대한후두음성언어의학회지
    • /
    • 제22권2호
    • /
    • pp.103-105
    • /
    • 2011
  • The voice defines man. The voice and speech have built all of the human civilizations. Man can communicate with each other by voice and enjoy his/her spare time with singing a song. Actually the voice is the most beautiful and the first musical instrument in history. The aim of this review article is to considering the voice as a musical instrument.

  • PDF

예산 제약에 따른 최적 부품구매수량 결정모델

  • 홍인섭;정석재;김경섭
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회 2004년도 추계학술대회 및 정기총회
    • /
    • pp.607-610
    • /
    • 2004
  • The purpose of this study is finding a solution to optimal quantities of concurrent spare parts(CSP) which are acquired for using considerably long time. To solve the problem, this paper proposes a new CSP model which can be used in permitting backorder flexibly. Through the simple experiment, we validate the mathematical model which is suggested in this paper. Also, we determine the purchasing quantities of each item minimizing total system costs under an available budget constraints.

  • PDF