• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.374-381
• /
• 2019

A conventional approach for the treatment of long-span edentulous areas is the use of removable dentures. However, placing implants in these areas results in superior functional outcomes by increasing the stability, support, and resistance of the prostheses and improving the masticatory efficiency. Treatment modalities utilizing implants can be further classified into either removable or fixed-type prostheses. Several factors such as the amount of alveolar bone resorption, inter-arch relationship, patient preferences, and socioeconomic status should be considered when determining the appropriate treatment approach. Monolithic zirconia has been considered a suitable material for implant-supported fixed dental prosthesis, because of the drastic improvement in its mechanical properties. It exhibits fewer incidences of fracture and chipping of the prostheses, and has greater bulk of material than metal-ceramic crowns and zirconia-veneered ceramics. Moreover, highly translucent monolithic zirconia is also available in the market, and its application is gradually increasing for anterior tooth rehabilitation. The present report describes a patient who underwent full-mouth rehabilitation with fixed dental prostheses (eight upper and three lower implant placements). All teeth, except bilateral mandibular canines and left mandibular first and second premolars, were extracted after the diagnosis of generalized chronic moderate-to-advanced periodontitis of the remaining teeth. The patient reported satisfactory esthetic and functional outcomes during the one-year follow-up visit.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.606-614
• /
• 2019

A mixing ratio of the oil in water (O/W) emulsion of palm oil and the non-ionic surfactant (Tween-Span type) possessing different hydrophile-lipophilie balance (HLB) values was evaluated in this work. An optimum condition was determined through analysis of main and interaction effects of each quantitative factor using central composite design model-response surface methodology (CCD-RSM). Quantitative factors used by CCD-RSM were an emulsification time, emulsification speed, HLB value and amount of surfactant. On the other hand, the reaction parameters were the viscosity and mean droplet size of O/W emersion. Optimized conditions obtained from CCD-RSM were the emulsification time of 12.7 min, emulsification speed of 5,551 rpm, HLB value of 8.0 and amount of surfactant of 5.7 wt.%. Ideal experimental results under the optimized experimental condition were the viscosity of 1,551 cP and mean droplet size of 432 nm which satisfy the targeted values. The average error value from our actual experiment for verifying the conclusions was below to 2.5%. Therefore, a high favorable level could be obtained when the CCD-RSM was applied to the optimized palm oil to water emulsification.

• Journal of Korea Port Economic Association
• /
• v.25 no.3
• /
• pp.269-282
• /
• 2009

This study investigates the difference of behavioral patterns between the import container volume of all ports and that of Gwangyang port in Korea. All series span the period January 1999 to December 2008. I first test whether the series are stationary or not. I can reject the null hypothesis of a unit root in each of the level variables and of a unit root for the residuals from the cointegration at the 5 percent significance level. I hitherto make use of variance decompositions and impulse response functions, both of which have now been widely used to examine how much movement in one variable can be explained by innovations in different variables and how rapidly these fluctuations in one variable can be transmitted to another. The variance decompositions for the import container volume show that the proportions of the forecast error variance of import container volumes explained by themselves are 30 and 26 per cent after 12 months, respectively. As a result, innovations in exchange rate and business activity explain 70 and 74 per cent of the variance in the import container volume. All in all, innovation accounting indicates that import container volumes are not exogenous with respect to exchange rate and business activity. The impulse responses indicate that container volumes decrease sharply to the shocks in exchange rate and decay very slowly to its pre-shock level, while container volumes respond positively to the shocks in the business activity and disappear very slowly, showing that the shocks last very long. Furthermore Gwangyang port is more sensitive to the change of the exchange rate and the industrial production than all ports.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.481-504
• /
• 2010

Wireless smart sensor networks (WSSNs) have been proposed by a number of researchers to evaluate the current condition of civil infrastructure, offering improved understanding of dynamic response through dense instrumentation. As focus moves from laboratory testing to full-scale implementation, the need for multi-hop communication to address issues associated with the large size of civil infrastructure and their limited radio power has become apparent. Multi-hop communication protocols allow sensors to cooperate to reliably deliver data between nodes outside of direct communication range. However, application specific requirements, such as high sampling rates, vast amounts of data to be collected, precise internodal synchronization, and reliable communication, are quite challenging to achieve with generic multi-hop communication protocols. This paper proposes two complementary reliable multi-hop communication solutions for monitoring of civil infrastructure. In the first approach, termed herein General Purpose Multi-hop (GPMH), the wide variety of communication patterns involved in structural health monitoring, particularly in decentralized implementations, are acknowledged to develop a flexible and adaptable any-to-any communication protocol. In the second approach, termed herein Single-Sink Multi-hop (SSMH), an efficient many-to-one protocol utilizing all available RF channels is designed to minimize the time required to collect the large amounts of data generated by dense arrays of sensor nodes. Both protocols adopt the Ad-hoc On-demand Distance Vector (AODV) routing protocol, which provides any-to-any routing and multi-cast capability, and supports a broad range of communication patterns. The proposed implementations refine the routing metric by considering the stability of links, exclude functionality unnecessary in mostly-static WSSNs, and integrate a reliable communication layer with the AODV protocol. These customizations have resulted in robust realizations of multi-hop reliable communication that meet the demands of structural health monitoring.

• Structural Engineering and Mechanics
• /
• v.50 no.5
• /
• pp.589-603
• /
• 2014

Expressions for determining the value of the impact force as reported in the literature and incorporated into code provisions are essentially quasi-static forces for emulating deflection. Quasi-static forces are not to be confused with contact force which is generated in the vicinity of the point of contact between the impactor and target, and contact force is responsible for damage featuring perforation and denting. The distinction between the two types of forces in the context of impact actions is not widely understood and few guidelines have been developed for their estimation. The value of the contact force can be many times higher than that of the quasi-static force and lasts for a matter of a few milli-seconds whereas the deflection of the target can evolve over a much longer time span. The stiffer the impactor the shorter the period of time to deliver the impulsive action onto the target and consequently the higher the peak value of the contact force. This phenomenon is not taken into account by any contemporary codified method of modelling impact actions which are mostly based on the considerations of momentum and energy principles. Computer software such as LS-DYNA has the capability of predicting contact force but the dynamic stiffness parameters of the impactor material which is required for input into the program has not been documented for debris materials. The alternative, direct, approach for an accurate evaluation of the damage potential of an impact scenario is by physical experimentation. However, it can be difficult to extrapolate observations from laboratory testings to behaviour in real scenarios when the underlying principles have not been established. Contact force is also difficult to measure. Thus, the amount of useful information that can be retrieved from isolated impact experiments to guide design and to quantify risk is very limited. In this paper, practical methods for estimating the amount of contact force that can be generated by the impact of a fallen debris object are introduced along with the governing principles. An experimental-calibration procedure forming part of the assessment procedure has also been verified.

• Proceedings of the Ginseng society Conference
• /
• 2002.10a
• /
• pp.502-508
• /
• 2002

The strains of Panax ginseng C.A. Mey., P. quinquefolius L. and selected strains P. ginseng-B, P.ginseng-A, P. quinquefolius-C were investigated. Activities of SOD, catalase and peroxydase were determined by methods of Fridovich et al. (1979), Komov et al.(1975), Bovaird et al.(1982) respectively. Activities of SOD, catalase, peroxydase were investigated every day 5 in cycle of cultivation. For P. ginseng it was the 35 days, P. quinquefolius the 70 days, P. quinquefolius-C 90 days. P. ginseng-B 90 days, P. ginseng-A 60 days. The P. quinquefolius, P. quinquefolius-C, P. ginseng-B had clear differentiation and developed tracheid elements, which are absent in strain of P. ginseng. The peaks of protein content for P. ginseng (4.5 units/g) and for P. quinquefolius (3.5 units/g) were on day 10 and remained unchanged till the last cultivation. The strain P. ginseng-A had two peaks of protein content (2.5 mg/g) on day 15 and on day 30. For P. ginseng-B strain these peaks were on day 5 and day 40 (3.5 mg/g). Peroxydase activity peak (60 units/g) in P. ginseng strain was on day 10. This activity in P. ginseng-B had two peaks on day 15 and day 35 and reached 95 units/g , increasing to 150 units/g to day 80. In strain of P. ginseng-A was only one maximum of this activity -130 units/g on day 45. In P. quinquefolius peroxydase activity was 103 units/g on day 40, increasing to 135 units/g to day 90. For P. quinquefolius-C this activity peak was 136 units/g on day 60. Peroxydase activities for the upper and lower layers of biomass was different and varied considerably from 28-35 units/g in lower to 270-290 units/g for upper layer. The SOD activity had two peaks in P. ginseng strain the 80 units/g and the 70 units/g on day 20 and day 35 respectively. Activity of SOD in P. quinquefolius strain reached 53 units/g on day 40 and increased up to 83 units/g to day 60.The similar increase of SOD activity was marked for P. ginseng-B to 85 units/g on day 90. In P. ginseng strain the 6 molecular isoforms SOD was defined. One of them with RfO,6 was determined in all days of cycle, three other (Rf-0.43; 0.54;0.80) only on day 10 and day 20. The isoform of SOD with Rf-0,29 was detected only on day 10 and with Rf-0,35 only on day 35. The catalase activity decreased in all strains to the last days of cultivation. The changes of SOD, catalase and peroxydase activities reflect the differences between the strains of Panax ginseng and Panax quinquefolius and their selected forms. The correlation between maximum life span of strains and activities of their antioxydant enzymes were detected.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.115-123
• /
• 2017

Dispite the fact that our military has outwardly made notable accomplishments such as the development of weapon systems like tanks, self-propelled artillery, and missiles, there has been a lack of attention to producing weapon effectiveness data that suggests a standard as to what effects the developed weapons will demonstrate on the battlefield. For such reasons, most of the weapon effectiveness data utilizes JMEM data introduced by the United States and as for the rest of the data that cannot be acquired, respective branches create and utilize their own data through research. This research aims to develop a reliable methodology that can meet the requirements of the requesting branches in a short span of time and at a low cost by studying the existing weapon effectiveness data production methodologies such as that of JMEM. As a result I have developed a method that calculates the vulnerable area and the probability of kill of the weapon system that one wants to calculate by applying statistical technique and simulation technique based on weapon effectiveness data of similar weapon systems in JMEM and live test data.

• Journal of Sasang Constitutional Medicine
• /
• v.14 no.2
• /
• pp.25-34
• /
• 2002

To understand characteristic of preservation of health in Sasang constitutional medicine, 1 first study preservation of health In ${\ulcorner}$Dongyi Bogam${\lrcorner}$, and then study preservation of health in the ${\ulcorner}$Dongyi Soose Bowon Sasang Chobongyun${\lrcorner}$ particularly Inherent vitality(命脈實數) and Regimen in ordinary life(生息充補之道) which shows early thought of Lee Je-ma. I acquire relation and difference between ${\ulcorner}$Dongyi Bogam${\lrcorner}$ and Dongyi Soose Bowon Sasang Chobongyun${\lrcorner}$, and conclude as follows. 1. In preservation of health ${\ulcorner}$Dongyi Bogam${\lrcorner}$ says Ups and downs of Qi according to degree, tells congenital health and acquired care of health, grades Jin-In, Ji-In, Seong-In, Hyeon-In according to degree of moral culture, and especially emphasizes managing mind which is based on Taoism. 2. In ${\ulcorner}$Dongyi Soose Bowon Sasang Chobongyun${\lrcorner}$ Dongmu divides human being to Sasangin(Taeyangin, Taeumin, Soyangin, Soeumin) according to Large & small of viscera, and regards as determine lift span and rendition of disease & health according to Inherent vitality which is degree of Small viscera. 3. Inherent vitality of Sasangin is supplemented by Regimen in ordinary life. Because Regimen in ordinary life decreases according to age, Dongmu emphasizes managing mind through an autonomic Knowledge Deed to maintain Regimen in ordinary life. 4. In the way of managing mind ${\ulcorner}$Dongyi Bogam${\lrcorner}$ says Taoist moral culture, but Dongmu emphasized control of knowledge and Deed by Confucian moral culture and the mind of control others through confucian self-control.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.515-525
• /
• 2016

Parameter analysis of a pretension girder bridge for urban maglev transit was performed to identify the main design parameters and their effect. Girder deflection at mid-span is the most important design criteria of urban maglev transit. Therefore, concrete compressive strength, girder height, girder length, and unbonded tendon length were selected as the design parameters that relate to girder deflection. In addition, tendon layout and unbonded tendon ratios were also considered as design parameters to control the top stress of the pretension girder section at the support. The analysis results show that both the girder height and length are dominant design parameters governing girder deflection, more important than compressive strength and unbounded tendon length. And, sensitivity analysis makes this study suggest design weight value. In terms of stress, a tendon layout that can satisfy the unbounded tendon rule requires an additional tendon or rebar at the upper section to control the tensile stress on top of the section. Therefore, to improve feasibility and constructability in the future, an enhanced unbonded tendon rule considering the load characteristics of the urban maglev system should be studied.

• International Journal of High-Rise Buildings
• /
• v.10 no.4
• /
• pp.335-344
• /
• 2021

In structural engineering practice, understanding the performance of composite columns under extreme loading conditions such as high-rise bulding, long span and heavy loads is essential to accuratly predicting of material responses under severe loads such as fires or earthquakes. Hitherto, the combined effect of partial axial loads and subsequent elevated temperatures on the performance of hollow steel column filled fly ash concrete have not been widely investigated. Comprehensive test was carried out to investigate the effect of elevated temperatures on partial axially loaded square hollow steel column filled fly ash concrete as reported in this paper. Four batches of hollow steel column filled fly ash concrete ( 30 percent replacement of fly ash), (HySC) and normal concrete (CFHS) were subjected to four different load levels, n_f of 20%, 30%, 40% and 50% based on ultimate column strength. Subsequently, all batches of the partially damage composite columns were exposed to transient elevated temperature up to 250℃, 450℃ and 650℃ for one hour. The overall stress - strain relationship for both types of composited columns with different concrete fillers were presented for each different partial load levels and elevated temperature exposure. Results show that CFHS column has better performance than HySC at ambient temperature with 1.03 relative difference. However, the residual ultimate compressive strength of HySC subjected to partial axial load and elevated temperature exposure present an improvement compared to CFHS column with percentage difference in range 1.9% to 18.3%. Most of HySC and CFHS column specimens failed due to local buckling at the top and middle section of the column caused by concrete crushing. The columns failed due to global buckling after prolong compression load. After the compression load was lengthened, the columns were found to fail due to global buckling except for HySC02.