• 헤리티지:역사와 과학
• /
• 제47권1호
• /
• pp.102-115
• /
• 2014

판축법은 판으로 틀을 만들어 그 안에 흙이나 모래 등을 층층이 부어 다짐 방망이 등으로 찧어서 단단하게 쌓아 올리는 대표적인 고대 토목기법으로, 토성이나 건물 기단, 담장과 같은 시설을 축조하는 데 가장 보편적으로 이용되어 왔다. 이글의 목적은 풍납토성 축조에 이용된 다양한 기술의 분석을 통해 우리나라 판축토성의 축조 방법과 원리를 이해하는 데 있다. 토성을 축조하기 위해서는 먼저 정지작업을 실시하고 기초를 단단히 조성해야 한다. 점성이 강한 흙을 깔아 기저부를 형성하는데, 구덩이를 파고 다시 메꾸어서 기초를 다지는 기조의 원리가 이용된다. 때로는 지정목을 박거나 잡석을 깔아 기초를 다지기도 한다. 풍납토성은 중심토루의 안팎으로 여러 겹의 판괴를 비스듬하게 연접하여 축조한 것이 특징이다. 비록 고정주와 협판, 달구질 흔적 등의 뚜렷한 판축의 증거는 발견되지 않았지만 판축틀의 일부로 추정되는 목재가 결구된 상태로 발견되기도 하였다. 이 층에서는 판괴 내의 결합력을 높이고 수분을 유지하여 지내력을 증강시키기 위한 부엽층도 확인되었다. 중심토루 외벽에서는 역경사 판축법을 이용한 호성파도 관찰된다. 이밖에 성벽 축조를 마무리하면서 부석과 석축으로 전체 성벽의 유실 방지와 방수, 배수 등의 효과를 꾀하였다. 습기를 통제하거나 판축토 내의 수분을 제거하기 위한 목적으로 불다짐하기도 하였다. 아직까지 우리나라 고대 토성에서 판축의 정형을 찾았다고는 말할 수 없다. 그러나 풍납토성 등에서 확인된 판축의 증거들을 향후 발굴될 여러 유적들과 면밀히 비교 연구해 나가면 판축토성의 축조 방법과 원리를 밝히는데 큰 진전이 있을 것으로 기대한다.

• 한국지리정보학회지
• /
• 제21권4호
• /
• pp.175-190
• /
• 2018

본 연구는 최근 해양선진국에서 이슈화되고 있는 해양공간계획(Marine Spatial Planning ; MSP)의 도구인 한국형 GIS 시스템에 있어 해양공간정보 데이터베이스 구축 시 도출되는 여러 가지 현안을 분석하고 개선방향을 도출하였다. 본 연구과정에서 구축된 우리나라 해역의 250여건의 공간정보는 자료수집, GIS 변환, 자료분석 처리 및 데이터 그룹핑과 핵심공간 매핑의 순서로 가공되었으며 이 과정에서 공간정보가 부족하여 디지타이징 과정을 거치거나 기존 해양공간정보와의 중첩 수행 시 발견되는 좌표계 오류 등 그 밖의 여러 가지 문제점이 발생하였다. 또한 해양이용현황 분석을 위한 공간데이터 제작 시 개인정보 제외 자료처리 방안과 지적기반의 공간정보 생성 시 실제 공간정보와 이격 발생을 최소화 하는 등 방안을 제시하였다. 부족한 공간정보의 확보를 위하여 해양수산정보 및 해당 메타파일의 표준규격을 제시하였으며 해양공간정보의 정밀도 및 해석력 제고를 위해 해양 공간 평가 지표를 제시하였다. 아울러 한국형 해양공간계획체제 구축을 위한 해양공간정보의 품질관리에 있어서의 생산, 처리, 분석, 활용 단계의 표준관리 지침수립으로 생애전주기에 걸친 품질관리체계를 제시하여 해양공간정보 개방 확대 및 활용모델에 대한 방향을 도출하였다.

• 한국수자원학회논문집
• /
• 제52권10호
• /
• pp.743-752
• /
• 2019

만곡수로에서의 흐름은 나선형 운동 형태의 이차류가 지배적이며, 이로 인해 일반적으로 만곡 외측을 따라 침식 현상이 발생하게 된다. 이러한 이차류를 약화시키기 위해서 보통 만곡수로 외측을 따라서 수제와 같은 수공구조물을 설치한다. 이 연구에서는 OpenFOAM 오프소스 소프트웨어를 토대로 난류 해석을 위한 하이브리드 RANS/LES 기법과 자유수면 해석을 위한 VoF기법을 이용한 3차원 수치모의를 통해서 $90^{\circ}$ 만곡수로에 설치된 잠긴수제가 후루드수가 0.43인 조건에서 이차류의 발달에 미치는 영향을 분석하였다. 시간과 공간에 대해서 2차 정확도의 유한체적법을 이용하여 수치모의를 수행하였으며, 수치해석 결과는 실험결과와 비교하여 수치모의의 정확도를 평가하였다. 잠긴수제가 설치된 경우의 수치모의 결과를 흐름방향 유속 분포와 횡방향 순환 유속벡터장을 중심으로 수리실험 관측값들과 비교할 때 수치모의 결과는 수리실험에서 관측된 주요 이차류 흐름 거동과 현상들을 대부분 양호한 정확도로 잘 재현하는 것으로 나타났다. 수치모의 결과를 비교해보면, 잠긴수제 설치로 인해서 만곡이 끝나는 단면 외측 하상부근에서의 유속은 약 평균유속의 1/3 정도 감소하는 반면에 수제 상단부에서의 전단층 발달에 따른 흐름 가속으로 자유수면 부근까지 유속이 증가하고 만곡 수충부에서는 수면 부근 유속이 약 20% 증가하는 것으로 나타났다. 결과적으로 잠긴수제는 만곡부에서 발생하는 이차류의 강도를 약화시켜 만곡부 외측 하상의 안정에 도움이 될 것으로 판단된다. 한편, 각 잠긴수제 전면부에서 말발굽와가 그리고 후면부에서는 후류가 형성되면서 수제 구조물 주변에서 강한 국부세굴이 발생하는 것으로 나타남으로, 국부세굴을 최소화할 수 있는 수제의 형상 및 배열에 대한 추가 연구가 요구된다.

• 해양안보
• /
• 제4권1호
• /
• pp.57-82
• /
• 2022

이 논문은 Z세대의 관점에서 현재 해군 인력 활용 체제의 한계점에 관해 탐구하고 개선방안을 고찰하는 논문이다. 밀레니얼 세대에 이어 Z세대가 등장하고 있고, 군 인력구성에서의 비율 또한 점진적으로 증가하고 있다. 해군의 임무 특성상 X세대와 다른 특성을 가진 밀레니얼 세대와 또 다른 특성이 있는 Z세대와의 융합은 필연적으로 고찰해야 하는 과제 중 하나이다. 좁은 함정(艦艇)이라는 공간에는 폭넓은 임무 수행을 위해 수많은 장비를 탑재하고 이를 24시간 동안 동등한 수준의 전투력으로 운영할 많은 수의 승조원이 함께 생활하게 되는데, 이러한 특수한 작전환경에서 승조원 간 세대 갈등은 크나큰 전투력 악화로 이어질 수 있다. 신세대 장병은 이전 세대와 다른 측면에서의 사회적 어려움을 겪고 있고 군에 대한 가치관이 서로 다르기에, 그들 간의 진정한 화합을 위해서는 각 세대의 가치관의 차이점에 대해 자세히 탐구하고 군 조직은 이러한 변화에 대해 적절한 대처를 하고 있는지 검토해 보아야 한다. 이에 따라, 1장과 2장에서 기성세대와 구분되는 밀레니얼 세대와 Z세대의 성장기에 겪었던 환경과 이를 바탕으로 형성된 가치관에 대해 알아보고 세대 간 갈등의 해결 필요성을 제기한다. 3장에서는 군사 강국이 MZ세대와의 공존을 위해 시행 중인 방안 분석을 통해 교훈을 도출한다. 4장에서는 해군만의 특수한 작전 환경에 대해 살펴보고, 현재 한국 해군의 인력 활용의 현주소를 수병, 부사관, 장교, 정책적 차원으로 살펴보면서 세대 간 융합의 장애 요소를 식별하고 이에 대응한 개략적인 해결방안을 제시한다. 5장에서는 세대 간 특성 인식을 통한 진정한 공감의 필요성과 기술 중심군인 해군에게 인력 활용 문제 해결의 중요성을 재고하며 향후 인력 활용 문제 및 세대 간 갈등 문제를 해결한 해군 조직의 기대상에 대해 서술하였다.

• 항공우주정책ㆍ법학회지
• /
• 제30권2호
• /
• pp.37-81
• /
• 2015

인도네시아의 에어 아시아 QZ8501 제트여객기가 2014년 12월 28일, 오전 5시 35분에 인도네시아, Surabaya도시에 있는 Juanda 국제공항을 출발하여 같은 날 8시 반 싱가포르 Changi 국제공항에 도착할 예정이었다. 그러나 인도네시아의 에어아시아(에어버스 A320-200) 여객기는 인도네시아 제 2의 도시인 수라바야공항에서 승개 162명을 태우고 싱가포를 향하여 비행도중 동년 12월 28일 Java 바다에 추락하였다. 인도네시아의 에어아시아 제트여객기의 잔해가 Juanda 국제공항에서 약 66 마일 떨어진 위치에서 발견되었으며 이곳에서 12월 28일 지상에 있는 항공교통관제관 (ATC) 과 조정사간에 교신이 끊겼다. 레이더에서 사라진 여객기 (QZ 8501)에는 승객 155명과 승무원 7명이 탔으며 희생된 여객 가운데에는 155명의 인도네시아어인, 3명의 한국인, 싱가포르인, 말레이시아인, 영국인이 각각 1명이었다. 말레이시아여객기 추락사건을 살피어 본다면, 말레이시아 여객기 (MH370)는 현지 시간 2014년 3월 8일 밤 12시41분 쿠알라룸푸르 국제공항을 출발하여 같은 날 새벽 6시 30분 (현지시간) 중국 베이징수도국제공항에 착륙 할 예정이었다. 그러나 말레이시아 여객기 (MH370) 는 쿠알라룸푸르 국제공항을 출발하여 베이징수도국제공항을 향하하여 비행도중 (쿠알라룸푸르와 북경 간에 비행거리: 4,414km 2,743마일) 갑자기 살아져 3월 8일 남인도양에 추락하였다. 이 말레이시아여객기는 쿠알라룸푸르 국제공항을 이륙한 후 1시간 만에 지상에 있는 항공교통관제관 (ATC) 과 조정사간에 교신이 두절되었으며 이 여객기에 227명의 승객 (15개국)과 12명의 승객이 타고 있었다. 상기 227명의 승객가운데에는 중국인 153명, 말레이시아인이 38명, 인도네시아 인이 7명, 호주인이 6명, 인도인이 5명, 프랑스인이 4명, 미국인이3명, 이란인이2명, 캐나다인이2명, 뉴질랜드인이 2명, 우크라이나인이 2명, 러시아인이 1명, 네덜란드인이 1명, 대만인이 1명이었음으로 중국인 승객이 거의 3분의 2 이상을 차지하고 있었다. 본 인도네시아 및 말레이시아 여객기 추락사건에 있어 승객 및 승무원들은 전원 사망하였고 가해자(국)인 인도네시아 및 말레이시아뿐만 아니라 피해자(국) 인 중국, 한국, 호주인, 인도, 프랑스, 미국, 인도네시아 및 말레이시아 등이 모두 1999년의 몬트리올조약의 가맹국이기 때문에 인도네시아 및 말레이시아의 항공사들은 동 조약 제21조에 따라 손해배상금액으로서 113,100 특별인출권 (SDR, 계산단위, 미화 155,000달러)를 유족들에게 무조건 지급하여야만 된다. 그러나 인도네시아 및 말레이시아 여객기 추락사건에 있어 유족들은 상기 배상금액에 만족하고 있지 않기 때문에 승객사망자에 대한 유족들의 손해배상청구소송 사건에 있어 일부 유족들은 자국법원에 소송을 제기하는 것보다는 손해배상금액을 많이 탈수 있는 미국 법원에 소송을 제기하고 있다. 미국은 현재 국제항공운송에 있어 항공여개운송인의 책임이 국제조약에 따라 유한책임 제도를 채택하고 있지만 국내항공운송에 있어서는 항공여개운송인의 책임이 무한책임제도를 채택하고 있다. 현재 미국법원은 국제 및 국내항공운송을 막론하고 항공여객운송인이 Wilful-misconduct (인식이 있는 중대한 과실) 범하였을 때에 무한책임을 인정하여 손해배상금액에 관한 판결내용이 30만 달러 내지 500만 달러를 상회하고 있음으로 유족들은 몬트리올조약 제33조 (재판관할권) 및 미국에서 제조한 여객기의 결함을 이유로 한 "제조물책임법"에 근거하여 본 소송사건에 있어 일부 유족들은 미국이변호사에 소송사건을 의뢰하여 미국법원에 손해배상청구소송사건을 제기한바 있다. 한편 필자의 의견으로는 1999년의 몬트리올조약 제17조에 규정되어 있는 국제항공운송인의 손해배상책임사유로 bodily injury라고 신체상의 상해만을 규정하고 있어 피해자 보호에 만전을 기할 수가 없음으로 앞으로 ICAO 법률위원회에서 가까운 장래에 몬트리올조약을 개정 할 때에 이 문구를 피해자의 정신적손해도 다 포함될 수 있도록 personal injury 라는 문구로 수정하는 것이 바람직하다고 본다.

• 대한지리학회지
• /
• 제30권1호
• /
• pp.68-92
• /
• 1995

소매업은 경제, 사회, 문화, 정치를 배경으로 소비자의 요구에 부응하며 발전해 가 기 때문에 지역구조의 이해라는 측면에서 증요한 연구 주제이다. 또한 소매업은 일상생활을 영위하기 위한 기본적인 기능이므로, 이에 대한 이해는 삶의 질 향상이라는 측면에서도 중 요하다. 최근, 우리나라는 주민소득의 향상과 그에 따른 수요의 다양화, 개성화, 그리고 정보 화 사회로의 이행, 대기업 및 외국유통업의 참여, 정부의 유통산업 근대화 작업 등 소매업 환경의 변화와 함께 소매업이 크게 변화하고 있다. 따라서 미래의 변화 예측과 바람직한 발 전 방향이 제시되어야 함에도 불구하고, 이에 대한 연구가 미흡하다. 이에 광주시를 연구대 상지역으로 선정하여, 소매업의 입지와 그에 대한 주민의 이용 행태, 그리고 주민의 바람직 한 이용방안을 분석하였다. 이는 입지행태라는 순수한 학문적기여 뿐 아니라, 지역의 효율성 과 평등성의 실현이라는 응용면에서도 중요한 의의를 지닌다.

• 미술자료
• /
• 제97권
• /
• pp.14-54
• /
• 2020

용주사 <삼세불회도>에 대한 연구는 연대 추정과 양식 분석, 작가 비정, 문헌 해석의 네 가지 핵심 사항이 실증적인 근거와 일관된 논리 아래 모두 일치되도록 정합적으로 설명해야 한다. 그러나 최근의 용주사 <삼세불회도> 연구에서 제기된 19세기 후반 화승 제작설과 1790년에 제작된 원본을 1920년대에 일반화가가 서양화법으로 개채한 것이라는 소론은 실증성과 논리성이 결여되어 성립되기 어렵다. 현존 <삼세불회도>의 축원문(祝願文)은 세자(世子) 책봉을 받지 않은 원자(元子)만 있던 시기였음에도 불구하고 당시의 관습대로 의례적인 삼전(三殿) 축원문을 썼다가 이를 주사로 지우고 다시 "주상전하수만세(主上殿下壽萬歲), 자궁저하수만세(慈宮邸下壽萬歲), 왕비전하수만세(王妃殿下壽萬歲), 세자저하수만세(世子邸下壽萬歲)"라는 특별한 내용과 예외적인 순서로 개서(改書)했는데, 이는 조선후기 불화의 축원문 형식과 내용을 광범위하게 조사하고 정조대 왕실의 전례(典禮)를 면밀히 분석해 볼 때, 현존하는 <삼세불회도>가 1790년의 창건 당시에 그려졌던 원본 진작임을 말해주는 가장 확실한 객관적 근거라고 할 수 있다. 삼세불회도의 형식(形式)과 도상(圖像), 양식(樣式), 미감(美感), 화격(畫格) 등을 18~19세기 불화나 궁중화원 양식과 다각도로 비교분석해 보면 용주사 <삼세불회도>는 1790년경 전후에만 나타나는 특징이 많이 보이기 때문에 축원문(祝願文)에 대한 분석 결과와 일치한다. 특히 18세기 전반까지만 해도 종교적 위상에 따라 존상의 크기가 결정되고 화면 구성도 근하원상(近下遠上)의 고식(古式) 원근법에 따라 관념적, 평면적 조형 위주로 이루어져 왔으나 이 <삼세불회도>는 투시법적 원근법의 논리에 따라 구축된 입체적 공간 속에 존상들을 매우 체계적으로 배치한 뒤 서양화(西洋畫)의 음영식(陰影式) 명암법(明暗法)을 적극적으로 구사하며 흰색 하이라이트와 그림자까지 표현함으로써, 마치 삼세불회(三世佛會)의 장엄한 세계가 눈앞에 실제로 펼쳐져 있는 것 같은 느낌을 준다. 이 투시법적 원근법의 내적 질서와 음영식 명암법의 외적 착시는 골육합체(骨肉合體)처럼 내적으로 긴밀히 연결되어 있는 것이기 때문에 흰색 하이라이트만 떼어내서 후대에 개채된 것이라고 볼 수 있는 것이 결코 아니다. 더구나 이 <삼세불회도> 같은 고도의 서양화법과 높은 화격(畫格)의 창의적 융합은 조선후기 회화사상 김홍도와 이명기, 김득신 같은 정조대의 궁중화원만이 이룩할 수 있는 고도의 양식이자 화격이다. 용주사 주지 등운(等雲)이 창건 이래 용주사에 전해져온 기록을 토대로 『용주사사적(龍珠寺事蹟)』을 정리하며 김홍도가 <삼세불회도>를 그렸다고 기록한 것은 이것이 당시의 역사(歷史)이자 실상이었기 때문이다. 조정의 공식 기록인 『일성록(日省錄)』과 『수원부지령등록(水原府旨令謄錄)』에는 김홍도와 이명기, 김득신이 감동(監董)했다고 기록되어 있지만, 이는 의례 화승(畫僧)들이 그려왔던 불화를 관원 신분의 화원에게 그리도록 하는 것이 엄격한 관직 체제나 운영상 부당한 것이기 때문에 정치적 부담을 피하기 위해 명분상 감동으로 발령한 뒤 실제로는 불화를 직접 그리도록 했던 데서 나타난 결과였다. 영정조대의 어진(御眞) 도사 과정에서 감동으로 불러들인 문인화가 조영석(趙榮祏)과 강세황(姜世晃)에게 국왕이 직접 그릴 것을 요구했던 사례에서 볼 수 있듯이, '감동(監董)'과 '집필(執筆)'은 경우에 따라 경계를 넘나들 수 있는 개념으로서 '감동'이 '집필'을 완전히 배제하는 것은 아니며 겸할 수도 있는 것이다. 그런 점에서 『용주사사적』의 기록은 『일성록』이나 『수원부지령등록』은 물론 황덕순의 「닫집 원문」 기록과도 모순되는 것이 아니라, 행간의 의미를 찾아 복합적으로 읽으면 각각의 맥락과 필요에 따라 동일한 내용의 표리를 다르게 기록해 놓은 것임을 알 수 있다. 이렇게 해석할 때 우리는 용주사 <삼세불회도>의 연대 추정과 양식 분석, 작가 비정, 문헌 해석의 네 가지 핵심 사항을 모두 실증적인 근거와 일관된 논리 아래 정합적으로 설명할 수 있을 것이다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 미술자료
• /
• 제96권
• /
• pp.18-53
• /
• 2019

최근 국립중앙박물관이 기증을 받아 "우리 강산을 그리다: 화가의 시선, 조선시대 실경산수화" 특별전(2019년)에서 처음으로 공개한 작품인 <경포대도>와 <총석정도>는 조선시대 회화사 이해에 있어 시사하는 바가 매우 지대하다. 두 작품이 1557년의 관동 유람을 계기로 그려진 병풍의 일부였음을 알 수 있어서 16세기 산수화에 대한 이해의 폭을 넓히는 데 획기적인 자료가 되기 때문이다. 이러한 중요성을 밝히기 위해서 본고에서는 <경포대도>와 <총석정도>에 담긴 경물의 내용을 살펴보고 제작시기와 양식상의 특징을 분석한 후, 다른 작품과의 비교를 통해서 이 작품에 담긴 회화사적인 의미에 대해서 살펴보았다. 이 작품의 제작 배경은 <총석정도>의 발문으로 알 수 있다. 본고에서 박충간(朴忠侃)(?~1601)으로 비정한 정상일로(商山逸老)가 1557년 봄에 홍연(洪淵)(?~?)과 함께 금강산(풍악산)과 관동 지역을 유람하고 유산록(遊山錄)을 작성하였으며 시간이 흐른 뒤 그중 몇몇 명승지를 그려 병풍을 만든 것을 알 수 있었다. 홍연은 자가 덕원(德遠)으로 1551년에 별시문과에 급제하고 1584년까지는 생존했던 인물이다. 박충간은 호가 남애(南崖)로서 1589년 정여립(鄭汝立)의 모역을 고변하여, 그 공으로 형조참판으로 승진되고 평난공신(平難功臣) 1등에 책록된 후 상산군(商山君)에 봉해진 인물이다. 이 글로 작품의 제작 시기를 1557년의 유람 후이자, 발문을 쓴 박충간이 50대 이상이 되는, 1571년 이후 곧 16세기 후반경으로 보았다. 산수나 나무 표현 등의 화풍을 기준으로도 16세기 후반의 시대 양식과 부합한다. 전술한 발문의 내용으로 <경포대도>와 <총석정도>가 병풍의 일부였던 것을 알수 있으며, 발문이 써 있는 <총석정도>가 마지막 폭이었을 것으로 생각된다. <경포대도>를 보면 구도면에서 조선 초기 안견파(安堅派) 산수화에서 볼 수 있는 편파(偏頗) 3단 구도의 요소를 찾을 수 있으나 실경(實景)을 대상으로 하여 그 배치와 화법이 현실화된 양상을 볼 수 있다. 시점(視點)에 있어서도 여러 경물간의 관계나 경관의 특징이 효과적으로 표현되도록 사선각(斜線角)의 부감시(俯瞰視), 정면시(正面視) 등을 활용하여 경포대의 넓은 영역을 효과적으로 표현하는 다각적(多角的)인 관점(觀點)을 보여준다. 산의 형태나 태점(苔點)의 사용은 1557년작 <의순관영조도(義順館迎詔圖)>(서울대학교 규장각한국학연구원 소장)와 매우 유사하다. 16세기 안견파의 특징인 짧은 선이나 점으로 질감을 내는 단선점준(短線點皴)과 구름 모양 운두준(雲頭皴)은 현장감 있게 변모되었다. 조선 초기 산수화의 전통적인 구도와 연결성을 찾을 수 있는 <경포대도>와 달리 <총석정도>는 그 구도가 매우 파격적이다. 화면에 중심축을 두고 돌기둥들이 첩첩이 도열하여 삼각형을 이루고 있는 데 근경(近景)의 돌기둥, 중앙의 사선봉(四仙峯), 절벽 위의 사선정(四仙亭)을 삼단계 정도의 깊이감으로 배치하여 화면에 공간감을 조성하였다. 중앙의 사선봉이 화면의 대부분을 차지하며 압도적인 비중을 점하고 있으나 수직적인 돌기둥들이 유기적인 관계를 형성하지 못하고 분질적(分節的), 평면적(平面的)인 양상으로 그려져 아직 입체적이고 자연스러운 공간감을 조성하는 데에는 이르지 못하고 있다. 기둥의 아랫부분은 희게 하고 윗부분은 어둡게 하여 고원(高遠)의 상승감을 고조시키는 효과가 있는데 각 기둥을 묘사하는 준법을 보면 기둥으로 설정된 면에 담묵을 바르고 그 위에 농묵의 가는 선들을 그어 총석의 질감과 쪼개짐을 묘사하였다. 붓끝을 사선으로 누르며 수직으로 내려 긋고 있어서 부벽준(斧劈皴)의 초기적 양상을 보인다. 일관되게 보이는 이러한 흑백의 대조, 수직적 준법의 구사는 앞으로 전개될 절파계(浙派係) 화풍의 유행을 예시해준다. 한편 기둥의 윤곽 및 균열문이 각각 다 달라서 실제의 특징을 살리려고 한 것을 알 수 있다. 기둥 위에 올라앉은 새들의 묘사, 파도와 흰 거품의 표현 등에서 반복적인 붓질을 찾을 수가 없고 매우 생생한 묘사력을 볼 수 있다. 이러한 <경포대도>와 <총석정도>의 경물 배치는 이후 변화를 보인다. <경포대도>는 아래쪽에 죽도(竹島)를 두고 경포호를 넘어 위쪽에 위치한 경포대 건물과 오대산 일대를 올려보는 구도였다. 이러한 배치는 경포대를 화면 아래쪽에 두고 위쪽의 바다를 향하는 18세기 이래의 전형적인 구성과 차이를 보인다. 바다 쪽에서 총석을 바라보며 그린 <총석정도> 역시 이후의 작품에서는 내륙에서 바다를 향하는 것으로 관점의 변화를 보인다. 이러한 변화는 정선(鄭敾)(1676~1759)과 김홍도(金弘道)(1745~1806 이후)의 작품이 제작된 이후, 두 사람의 구도를 따라 관동도의 유형이 정착되는 것과 관련이 있다. 하지만 사라진 듯 했던 16세기 <경포대도>의 구도가 조선 말기 <강릉 경포대도>에서와 같이 민간 회화에서 전승된 것도 확인해 볼 수 있다. 관동 지역의 명승도는 이른 시기부터 그려져 고려 김생(金生)(711~?)의 관동도(關東圖), 조선 초 안견(安堅)(15세기 활동)의 낙산사도(洛山寺圖) 등 여러 화가가 단폭이거나 여러 폭의 관동도를 병풍이나 첩 형태로 그렸던 것을 문헌으로 확인할 수 있다. 이처럼 기록은 많으나 이를 증명할 수 있는 작품이 없었는데 본고에서 고찰하는 이 두 점은 현존하는 관동도 중 연대가 가장 올라가는 예로 기록으로만 남아 있는 관동도(關東圖) 병풍(屛風)의 제작 양상을 알게 해주어 회화사적인 의미가 크다. 특히 발문의 내용에 따라 8폭 병풍일 것으로 생각되어 16세기 후반에 이미 관동팔경도(關東八景圖) 형식이 형성되었음을 알 수 있다. 그 성격에 있어서 현존하는 16세기 실경산수화의 예로 거론되는 작품들이 모두 실용적, 공적인 목적의 계회도나 기록화로 제작되어 실경산수화적 요소가 부분적으로 나타난 것과 달리 이 작품은 실제 경관을 대상으로 자연의 변화무쌍함과 아름다움을 담고자 하는 것이 일차적인 목적이었다는 점이 주목된다. 발문을 쓴 박충간은 유람할 때 지었던 감상시를 곁들여 자연의 진면목을 반추하는 태도를 보인다. 이 점은 기존에 알려진 실경산수화의 성격과 그 양상을 달리하는 것으로 순수 감상을 목적으로 한 본격적인 실경산수화의 예라는 점에서 그 중요성이 높다. 이처럼 <경포대도>와 <총석정도>의 두 작품은 유람의 결과를 시화(詩畫)로 제작하였다는 역사적 사실을 현존 작품으로 확인할 수 있는 가장 이른 예라는 점에서 그 의미가 지대하다. 또한 그간 확인할 수 없었던 16세기 실경 산수화의 다양한 형태와 구도 및 시점의 면모를 보여주어 한국 실경산수화에 대한 이해의 폭을 확장한 점에서도 그 중요성이 매우 크다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.