• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.1
• /
• pp.71-78
• /
• 2002

In this study, the influence of the presence of discontinuity planes on the load transfer mechanism and the pattern of loosening zone was studied based on the laboratory test. The trap-door and the reaction plates are installed as the bottom plane of the model box. The vertical discontinuity plane is installed in the dry sand. Various overburden heights and locations of discontinuity planes are applied as major factors in this study. The results show that at higher overburden heights over about 1.5 times the excavation width, the ratio of the transferred stress to the insitu stress converges to a certain value even if the overburden height increases further. The results also show that the discontinuity plane gives relatively larger influence on the load transfer mechanism, that produces the unsymmetrical load concentration, when the discontinuity plane locates within the tunnel width. When the discontinuity plane locates outside the tunnel width, the unsymmetrical load concentration is reduced considerably.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.82.1-82.1
• /
• 2013

The SPICA (SPace Infrared Telescope for Cosmology & Astrophysics) project is a next-generation infrared space telescope optimized for mid- and far-infrared observation with a cryogenically cooled 3m-class telescope. Owing to unprecedented sensitivity and high spatial resolution, the focal plane instruments are expected to perform the confusion-limited observation. The SPICA will challenge to reveal many astronomical key issues from the star-formation history of the universe to the planetary formation. The Korean 5contribution to SPICA as an international collaboration is the development of the near-infrared instrument, FPC (Focal Plane Camera). The Korean consortium for FPC proposed a key system instrument for the purpose of a fine guiding (FPC-G) complementing the AOCS (Attitude and Orbit Control System). The back-up instrument of FPC-G, FPC-S will be responsible for the scientific observations as well. Through the international review process, we have revised the scientific programs and made the feasibility study for the fine guiding system. Here, we report the current status of SPICA/FPC project.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.7 no.1
• /
• pp.31-38
• /
• 1977

A study was performed to investigate the size of tongue area and intermaxillary space area, and compare the sexual differences between normal Korean children and adults by introducing planimetric and linear analysis of the lateral cephalograms. The cephalograms were composed of 41 child male aged 10.8, 40 child female aged 10.5, 38 adult male aged 21.3 and 40 adult female aged 20.8 respectively. In order to study and measure the intermaxillary space area, the followings were selected, as reference items: occlusal plane, anterior intermaxillary space height, posterior intermaxillary space height, length of intermaxillary space. Among those reference items anterior intermaxillary space height and posterior intermaxillary space height were perpendicular to the maxillary plane. An. index, (equation omitted) While the tongue area was plotted by outline of tongue shadow, above a line extending from the vallecula to the most anterior point on the hyoid body, and above a line from the most anterior point of the hyoid body to the menton. The obtained results were as follows: 1. In general the measurements of male were larger than those of female in intermaxillary space area in childhood and adulthood group. but intermaxillary space area of childhood group showed no significant sexual difference, and that of adulthood group showed significant sexual difference when evaluated statistically. 2. In both groups the measurements of male were larger than those of female in tongue area and there are also statistical significance of sexual differences in both age groups. 3. Considerable growh changes between the childhood and adulthood groups were revealed in intermaxillary space area and tongue area, and the tongue had tendency to become relatively smaller when compared with the intermaxillary space in both sex.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.53.2-53.2
• /
• 2014

IGRINS, the Immersion GRating INfrared Spectrometer, is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG focal plane array (FPA) detectors. The mechanical mounts for these detectors serves a critical function in the overall instrument design: Optically, they permit the only positional compensation in the otherwise "build to print" design. Thermally, they permit setting and control of the detector operating temperature independently of the cryostat bench. We present the design and fabrication of the mechanical mount as a single module. The detector mount includes the array housing, a housing for the SIDECAR ASIC, a field flattener lens holder, and a support base. The detector and ASIC housing will be kept at 65 K and the support base at 130 K. G10 supports thermally isolate the detector and ASIC housing from the support base. The field flattening lens holder attaches directly to the FPA array housing and holds the lens with a six-point kinematic mount. Fine adjustment features permit changes in axial position and in yaw and pitch angles. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the computer simulation, the designed detector mount meets the optical and thermal requirements very well.

• Archives of design research
• /
• v.11 no.2
• /
• pp.83-92
• /
• 1998

If the Industrial Revolution had been the first industrial revolution. our 21st century will witness a second industrial Revolution. Namely. we will attest to a revolution whereby we will be freed from brain work by automation systems. computers and artificial intelligence. The technological revolution of the Information society has also resulted in various changes in the area of design. Designers almost depend on the newest computers of advanced functions to drastically reduce the production time. maximize the effects. save the cost and differentiate the design products for a stronger competitiveness. Accordingly. the media of design expression are changing. In short. the design works which had been done on the plane are now being expressed on the three-dimensional cyber space. Thus, this study alms to review the effects. positive and negative. of such a trend on the design.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.76.2-76.2
• /
• 2013

SPICA(SPace Infrared Telescope for Cosmology and Astrophysics) is an infrared space observatory with cooled telescope of 3 m aperture. Because of its large aperture, near- and mid-infrared instruments onboard SPICA require fine guidance with attitude accuracy less than 0.1 arcsecond. The FPC-G is a focal plane camera to achieve this high attitude accuracy and KASI is leading its development. The SPICA project is now under the Risk Mitigation Phase 2 (RMP2) and one of major risks is to satisfy the requirement of pointing and attitude control. To assess the impacts of disturbance sources on the attitude control and devise methods to mitigate possible risks, a software simulator of the FPC-G is under the development. In this presentation, we report the status of development of the simulator and the development plan during the RMP2.

• Korean Institute of Interior Design Journal
• /
• v.18 no.3
• /
• pp.11-19
• /
• 2009

This research grasped the change of bathroom type, the present status for the residents' bathrooms, the level of satisfaction and preference for the residents' bathrooms, along with the plane of large-size apartment. This research aims to contribute to making the bathroom space to be able to satisfy the residents' desires. A total of 115 samples, acquired via internet survey, were analyzed with the statistical computer program SPSS PC+ 15.0 with the bathroom plane analysis. The results of this research are as follows. 1) As the results of the most representative plane, were divided into total 4 bathroom types, public bathrooms were $3.9-5.29m^2$ couple bathrooms were over than $3.17-8.3m^2$ in the average bathroom area, and there were two in less than $199m^2$ and even three in more than $199m^2$ in the number of bathrooms. 2) Three bathrooms were preferred by the residents who have three bathrooms now and by the younger generation though two bathrooms were preferred by most residents in the bathroom number. Most of the public bathrooms and couple bathrooms were considered to be proper in the bathroom area. 3) The preferred types were different according to each brand in the preference of the bathroom form. This means that to present a new plane figure including various bathroom forms is recommended in planning the bathroom space hereafter, that the bathroom spaces are changing. 4) In the bathroom environment, to present the technical solution through the study for the natural lighting and the sound arresting is required. This research hopes that the results of this research will be able to be used as the basic data to provide the bathroom space equipped with a pleasant environment condition to the residents.

• Tunnel and Underground Space
• /
• v.18 no.3
• /
• pp.194-201
• /
• 2008

In order to investigate the characteristics in tensile strength of transversely isotropic rock, a new anisotropic tensile failure function was suggested. According to the function, the tensile strength is minimum in the normal direction to a weakness plane and rises exponentially to its maximum on a plane perpendicular to the weakness plane. The anisotropic function is defined in terms of three strength parameters which can be identified trom direct tensile tests of transversely isotropic rocks. By incorporating the suggested function into the critical plane approach, a numerical procedure which enables to search the tensile strength and the direction of critical plane at failure was presented. The validity of the suggested numerical procedure was checked through the simulation of direct tensile tests reported in a literature. The numerical results from the simulation were in good agreements with those from the laboratory tests.

• Structural Engineering and Mechanics
• /
• v.42 no.4
• /
• pp.589-608
• /
• 2012

In this study, the effect of in-plane deformations on the dynamic behavior of laminated plates is investigated. For this purpose, the displacement-time and strain-time histories obtained from the large deflection analysis of laminated plates are compared for the cases with and without including in-plane deformations. For the first one, in-plane stiffness and inertia effects are considered when formulating the dynamic response of the laminated composite plate subjected to the blast loading. Then, the problem is solved without considering the in-plane deformations. The geometric nonlinearity effects are taken into account by using the von Karman large deflection theory of thin plates and transverse shear stresses are ignored for both cases. The equations of motion for the plate are derived by the use of the virtual work principle. Approximate solution functions are assumed for the space domain and substituted into the equations of motion. Then, the Galerkin method is used to obtain the nonlinear algebraic differential equations in the time domain. The effects of the magnitude of the blast load, the thickness of the plate and boundary conditions on the in-plane deformations are investigated.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.39.3-39.3
• /
• 2017

To see scientific potential of MIRIS Paschen-${\alpha}$ ($Pa{\alpha}$) Galactic Plane Survey (MIPAPS), we have selected a portion, Galactic longitude from $+96^{\circ}$ to $116^{\circ}$, and inspected $Pa{\alpha}$ detections for 212 sources in WISE H II region catalog. We also list up $35Pa{\alpha}$ large features and $32Pa{\alpha}$ point-like blobs, which have not been cataloged in WISE catalog. For all the sources, we have performed the photometry of $Pa{\alpha}$ emission line, and obtained their $Pa{\alpha}$ intensities and $Pa{\alpha}$ fluxes. For the quantitative comparison, we also make the $H{\alpha}$ mosaic image of the same region by using IPHAS data which have been globally calibrated and released recently. Comparing MIPAPS $Pa{\alpha}$ fluxes with the IPHAS $H{\alpha}$ fluxes enables us to estimate dust extinction and spectral types of ionizing sources. We present the results for some sources.