• 천문학회보
• /
• 제37권1호
• /
• pp.93.1-93.1
• /
• 2012

In this study, we investigated the generation of consecutive electrostatic solitary waves (ESWs) using by one-dimensional electrostatic particle-in-cell (PIC) simulation. For a given Gaussian perturbation, it is found that electron two-stream instability occurs in local grids region. Thus because of this instability, the electrostatic potential grows rapidly so as to be separated into electron and ion in perturbation region, and then electrons are trapped with heating during growing instability. It is found that these heated and trapped electrons are caused the generation of ESW, and ions are reflected backward and forward at the boundary of the initial perturbation, then form cold ion beam whereas electrons are confined to inside of the potential. Furthermore backward reflected ion beam forms ion holes by ion two-stream instability. On the other hand, as the confined electrons are released, and then released electrons also form hot electron beam, which play an important role in the generation of consecutive ESWs such as broadband electrostatic noise (BEN) observed frequently in space environment. Therefore the reason of the generation of consecutive ESWs is the existence of heated electrons which can sufficiently support energy to produce ESWs.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1538-1551
• /
• 1997

Kinetic energy conservation for fixed and moving grids is examined in time-accurate finite element computation of fully unsteady inviscid flows. As numerical algorithms, fractional step method (FSM) and modified SIMPLE are used. To simulate the flow in moving grid system, arbitrary Lagrangian-Eulerian (ALE) method is adopted. In the present study, the energy conserving time integration rule for finite element algorithm is proposed and discussed schematically. It is shown that the discretization by Crank-Nicolson in time and Galerkin (central difference) in space must be used to ensure energy conservation. The developed code has been tested for a standing vortex in fixed or moving grid system, sloshing in a tank and propagation of a solitary wave, and has been shown to be a completely energy conserving algorithm.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.619-625
• /
• 2012

Since the fuel is always exposed to turbulent flow, the grid strap shows flow induced vibration characteristics that impact on the nuclear fuel soundness. The dynamic behavior of grids in nuclear fuels is quite complex, since two pairs of spring and dimple support are contacted with rods by friction in the limited space. This paper focuses on investigation of the grid strap(test fuel strap, TFS) vibration in one cell. TFS consists of a single spring and double dimples. To identify the grid strap vibration, modal analysis of the strap is performed using finite element method(FEM). Modal testing on a $5{\times}5$ grid structure without rods is performed. The modal testing results are compared to analytic results. In addition, random test considering rod effect is performed about a $5{\times}5$ grid with rods under real contact condition in the air. Finally, the strap vibration of a $5{\times}5$ fuel bundle in investigation of flow induced vibration(INFINIT) facility is measured in real fluid velocity condition without heating. It is shown that modal frequencies from the test are almost equal to those peak frequencies in the INFINIT test.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.420-423
• /
• 2008

This present work is to find optimum design of a NACA65 axial fan blade with weighted average surrogate model. The numerical analysis by Reynolds-average Navier-Stokes equations with shear stress turbulence(SST) is discretized by finite volume approximations and solved on hexahedral grids for flow analysis. The blade aerodynamic shape is modified by six design variables for the optimization. The blade profile as well as stacking line is modified to enhance blade total efficiency. Six design variables, airfoil maximum camber, maximum camber location, leading edge radius, trailing edge radius, lean angle at 50% span and lean angle at 100% span, are selected for blade profile to enhance the total efficiency. The PBA model which is basically weighted average of the basis surrogates is used to find the optimal design in the design space from the constructed response surface model for the objective function. By the optimization, the total efficiency is increased by 1.4%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.565-567
• /
• 2000

In this paper, the discharge characteristics of AC PDP, one of the leading technologies currently under development for large-area flat displays, is computed by using Finite Element Method(FEM) combined with Flux-corrected Transport(FCT) algorithm. Up to now, many simulations of AC PDP have been mainly done by Finite Difference Method(FDM). But we simulated the AC PDP by using FEM-FCT method which discretizes the region of interest with unstructured grids. FEM-FCT method can reduce the computational cost because of refining locally where the physical quantities have steep gradients and is more efficient in solving discharge problems, such as a AC PDP. Results are presented in Ne-Xe(4%) gas mixture for a gas pressure of 400 Torr and as the discharge proceeds, the space and time variations of the electron and ion densities, potential and wall charges on the dielectric are described. Results from our simulation by FEM-FCT are similar to those from simulation by FDM and are more efficient in computational cost reduction.

• 한국분무공학회지
• /
• 제2권2호
• /
• pp.8-15
• /
• 1997

Combustion chamber systems using spray impinged on walls have been studied for improving combustion characteristics in high speed direct injection diesel engines. The fuel spray injected in a small combustion chamber may be easily impinged and deposited on the wall. The fuel deposit has been considered as the cause for unburned emission due to difficulty of fuel-air mixing. In this paper w-shaped combustion chamber which has four raised pips on the side wall is introduced and discussed by comparing with conventional chamber with no pips. The computer code employing new spray-wall interaction model in general non-orthogonal grids is used in here. The model is applied into the new chamber shape with raised pips. In this chamber system four-hole nozzle is used, and the sprays injected from the each hole impact on lands raised from the chamber wall surface. After impacting, the sprays break up into much smaller drops and distribute over all the chamber space, instead of distributing just near the wall surface in conventional omega-shape. The results showed the potential of the w-shaped chamber employing pips for dispersing droplets so as tn avoid the fuel deposit regions.

• 설비공학논문집
• /
• 제14권11호
• /
• pp.914-922
• /
• 2002

Thermo-acoustic waves can be thermally generated in a compressible flow field by rapid heating and cooling, and chemical reaction near the boundary walls. This mechanism is very important in the space environment in which natural convection does not exist. Also this may be a significant factor for heat transfer when the fluids are close to the thermodynamic critical point. In this study, the generation and transmission characteristics of thermo-acoustic waves in an air-filled confined domain with two-step pulsed heating are studied numerically. The governing equations are discretized using control volume method, and are solved using PISO algorithm and second-order upwind scheme. For the purpose of stable solution, time step was set to the order of $1\times10_-9s,\;and\;grids\;are\;50\times2000$. Results show that temperature and pressure distributions of fluid near the boundary wall subjected to a rapid heating are increased abruptly, and the induced thermo-acoustic wave propagates through the fluid until it decays due to viscous and heat dissipation. Pressure waves have sharp front shape and decay with a long tail in the case of step heating, but these waves have sharp pin shape in the case of pulsed heating.

• Structural Engineering and Mechanics
• /
• 제17권1호
• /
• pp.1-14
• /
• 2004

Numerical solution to linear bending analysis of circular plates is obtained by the method of harmonic differential quadrature (HDQ). In the method of differential quadrature (DQ), partial space derivatives of a function appearing in a differential equation are approximated by means of a polynomial expressed as the weighted linear sum of the function values at a preselected grid of discrete points. The method of HDQ that was used in the paper proposes a very simple algebraic formula to determine the weighting coefficients required by differential quadrature approximation without restricting the choice of mesh grids. Applying this concept to the governing differential equation of circular plate gives a set of linear simultaneous equations. Bending moments, stresses values in radial and tangential directions and vertical deflections are found for two different types of load. In the present study, the axisymmetric bending behavior is considered. Both the clamped and the simply supported edges are considered as boundary conditions. The obtained results are compared with existing solutions available from analytical and other numerical results such as finite elements and finite differences methods. A comparison between the HDQ results and the finite difference solutions for one example plate problem is also made. The method presented gives accurate results and is computationally efficient.

• 천문학회보
• /
• 제36권1호
• /
• pp.82.1-82.1
• /
• 2011

We present a new code for solving non-LTE radiative transfer problems in a general grid (RIG). RIG develops from RATRAN code (Hogerheijde & van der Tak 2000) using the Accelerated Monte-Carlo method, and it can cope with line overlap effect among multiple molecular and atomic species. In this algorithm we make grids in arbitrary coordinates adequate to the problem, but, on the other hand, photons propagate in the Cartesian coordinates. For spherical, cylindrical and other well defined coordinate, the problem of tracing photon's path reduces to solving simple quadratic equations. For example, the outflow in the star formation have high dynamic range in scales from a few AU to ~ 0.1 pc and have also cylindrical symmetry. So, we have used (r, ${\alpha}$) coordinate system, where r is the distance from the origin and ${\alpha}$ is z/ R2 in the cylindrical coordinate of (R,z). The (r, ${\alpha}$) coordinate realizes the density - power function of r - and temperature distributions of the problems with smaller numbers of grid than the cylindrical coordinate does, and the former consumes less time to solve the problems than the latter.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1026-1034
• /
• 2015

In this paper, a unified control strategy using the current space vector modulation (CSVM) technique is proposed and applied to a bidirectional three-phase DC/AC converter. The operation of the converter changes with the direction of the power flow. In the charging mode, it works as a buck type rectifier; and during the discharging mode, it operates as a boost type inverter, which makes it suitable as an interface between high voltage AC grids and low voltage energy storage devices. This topology has the following advantages: high conversion efficiency, high power factor at the grid side, tight control of the charging current and fast transition between the charging and discharging modes. The operating principle of the mode analysis, the gate signal generation, the general control strategy and the transition from a constant current (CC) to a constant voltage (CV) in the charging mode are discussed. The proposed control strategy has been validated by simulations and experimental results obtained with a 1kW laboratory prototype using supercapacitors as an energy storage device.