• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.302-309
• /
• 2008

ERT imaging, especially 3-D method, is a very powerful means to obtain a very high resolution image of the subsurface for geotechnical or hydrogeological problems. In this paper, we introduce two examples of successful case histories, where the imaging targets were three-dimensional. First example is the case of 3-D fracture imaging for hydrogeologic application. In this example, the borehole deviation was a critical problem in the ERT imaging and we could obtain real 3-D attitude of fracture system by including the borehole deviation in the inversion. In the second case, we did field experiment to image the empty tunnel with the size of $2m{\times}2m$ and the target was very clearly imaged in 3-D space. In these examples, we could show that 3-D ERT imaging is a very powerful tool for the 3-D subsurface imaging and the method can provide enhanced imaging capabilities especially for the 3-D targets such as fractures and cavities or tunnel.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.4
• /
• pp.308-313
• /
• 2014

Recently, for longevity of resident building, the main trend is that the change of the inside space organization of resident building from wall construction to rhamen construction, which resulted in increase in use of lightweight composite panel. Thus, in this study, authors analyzed the engineering property of oxide of magnesium depending on the magnesium chloride addition ratio. The results of this research is expected to contribute on providing a fundamental material for the surface materials of lightweight composite panel. As the result of the experiment, as fluidity increased, air content decreased and initial set and final set as the magnesium chloride addition ratio increase. In the aspect of flexural strength and compressive strength, the test specimen showed the highest strength at 40% of the magnesium chloride addition ratio. At 20% of the magnesium chloride addition ratio, the test specimen showed the lowest water absorption rate. As the magnesium chloride addition ratio increases, the expansibility tends to increase as well in the aspect of shrinkage strain. After observing microstructure, we can see hydration products in the form of needle. It appeared high flexural strength because the hydration products have mineral fibrous tissue shape, which also contribute to the cause of the expansibility.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.43-51
• /
• 2015

Stresses from desolate urban environments cause illnesses and worsen health conditions of urban residents, while natural environments have a positive influence on human. Natural healing programs such as forest therapy and horticultural therapy can be differentiated by the characteristic of activity space. However, previous studies of healing programs have focused on either forest therapy or horticulture therapy and there is a limit to comprehending the effects of adopting and connecting various healing programs. This study compares and analyzes the physiological and psychological effects of forest therapy and horticultural therapy to identify the effects and differences by types of healing programs. The before and after effects of horticultural therapy and forest therapy are measured by experiment and survey for 5 days with 5 subjects in each program. For physiological reaction, blood pressure, pulse, and cortisol levels are measured and the profile of moods states(POMS) is used to measure psychological reaction. Collected data are analyzed with the analysis of variance(ANOVA) and Paired-Sample T-test in SPSS 18.0. The results of this study are as follows: 1) forest therapy and horticultural therapy show positive effects in physiological and physiological aspects, 2) forest therapy is more effective than horticultural therapy in physiological relaxation and stress mitigation, 3) horticultural therapy has a tendency to alleviate depression more effectively than forest therapy. In conclusion, this study contributes to providing fundamental information for the development of healing programs and design guidelines for healing spaces through identifying the characteristics of each healing program.

• The korean journal of orthodontics
• /
• v.18 no.2
• /
• pp.311-327
• /
• 1988

Vascular changes in the periodontal ligament of the rat incisors following application of experimental orthodontic forces were examined by the India ink perfusion method. 57 rats were used for this experiment. The rats were divided into experimental group (54 rats) and control group (3 rats). 54 experimental rats were divided into group I (27 rats) and group II (27 rats). The right and left upper incisors of group. I and group II rats were separated distally with forces of 20gm, 70gm respectively. The vascular changes of periodontal ligament were observed histologically by means of light microscope after 1, 2 and 3 days of tooth movement and 1,3,5,8,14, and 21 days after removal of orthodontic force. The results were as follows; 1. After one day of tooth movement, occlusion of blood vessels, hyalinization of periodontal ligament and resorption of alveolar bone adjacent to the alveolar crest on pressure side were observed. Above the tissue changes on the pressure side of group II were more severe than those of group I. Especially, septal bone of group II was separated after 2 days of tooth movement. 2. In tension zones, periodontal space was widened and periodontal fibers were orientated in the direction of puil. The blood vessels of periodontal ligament were distended. New bone deposition was seen along the inner surface of the alveolus after 2 days of tooth movement. 3. After 3 days of tooth movement, deposition of new bone was seen along the periosteal surface of alveolar bone on pressure side, progressing with increasing after removal of orthodontic force. Remodelling of the new bone was occurred 5 days after removal of orthodontic force. 4. 3 days after removal of orthodontic force, invasion of blood vessels into the marginal periodontal ligament on pressure side was observed clearly and the vessels below the epithelial attachment were increased. 5. After removal of orthodontic force, hyalinized structures disappeared concomittantly with an invasion of blood vessels from the neighboring periodontal ligament. 14 days after removal of orthodontic force, the vessels in the periodontal ligament of group I were finished the vascular rearrangement. 21 days after removal of orthodontic force, the vessels in the periodontal ligament of group II were finished the vascular rearrangement.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.106-119
• /
• 2012

Roughness of rock joint has generally been characterized based upon geometrical aspects of a two-dimensional surface profile. The appropriate description of joint roughness, however, should consider the features of roughness mobilization at contact areas under normal and shear loads. In this study, direct shear tests were conducted on the replicas of tensile fractured gneiss joints and the influence of the shear direction on the shear behavior and effective roughness was examined. In this procedure, a joint surface was represented as a group of triangular planes, and the steepness of each plane was characterized using the concepts of the active and inactive micro-slope angles. The contact areas at peak strength which were estimated by a numerical method showed that the locations of the contact areas were mainly dependent on the distribution of the micro-slope angle and the shear behavior of joint was dominated by only the fractions with active micro-slope angles. Therefore, a three-dimensional coefficient for the quantification of rock joint roughness is proposed based on the distribution of active micro-slope angle: active roughness coefficient, $C_r$. Comparison of the active roughness coefficient and the peak shear strength obtained from the experiment suggests that the active roughness coefficient is the effective parameter to quantify the surface roughness and estimate the shear behavior of rock joint.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.295-307
• /
• 2006

Objective: The purpose of this study was to compare the histological and biomechanical characteristics of self-tapping and self-drilling microscrew implants. Methods: 112 microscrew implants (56 self-drilling and 56 self-tapping) were placed into the tibia of 28 rabbits. The implants were loaded immediately with no force, light (100 gm), or heavy force (200 gm) with nickel-titanium coil springs. The animals were sacrificed at 3- and 5-weeks after placement and histologic and histomorphometric analysis were performed under a microscope. Results: All microscrew implants stayed firm throughout the experiment. There was no significant difference between self-drilling and self-tapping microscrew implants both in peak insertion and removal torques. Histologic examinations showed there were more defects in the self-tapping than the self-drilling microscrew implants, and newly formed immature bone was increased at the interface in the self-tapping 5-week group. There was proliferation of bone towards the outer surface of the implant and/or toward the marrow space in the self-drilling group. Histologically, self-drilling microscrew implants provided more bone contact initially but the two methods became similar at 5 weeks. Conclusion: These results indicate the two methods can be used for microscrew implant placement, but when using self-tapping microscrew implants, it seems better to use light force in the early stages.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.201-210
• /
• 2012

Because sensing odor varies depending on each person, even if the odor is released in line with the legal emission permission concentration levels, it can still become a social issue if a civil complaint is made. The purpose of this research is to study the possibility of putting Mn-Cu metallic oxide catalysts into practical use to economically eliminate acetaldehyde which produces a odor in the industrial process. An optimal operating parameter to eliminate acetaldehyde was deduced through a performance evaluation in the research laboratory and the performance was verified by applying the parameter into an actual facility as an on-the-site experiment through a Scale-up of pilot size. The operating temperature of the metallic oxide catalysts researched so far was at the minimum close to $220^{\circ}C$, and the $220^{\circ}C$ elimination efficiency was 50% or below. However, having experimented by using a Mn-Cu metallic oxide catalyst in this research, optimum elimination efficiency showed when space velocity (GHSV) was equal to or below 6,000 $hr^{-1}$. The average elimination efficiency was 61.2% when the catalyst controlling temperature was $120^{\circ}C$, 93.3% when the catalyst controlling temperature was $160^{\circ}C$, and 94.9% when catalyst controlling temperature was $180^{\circ}C$, thereby reflecting high elimination efficiency. The specific surface area of the catalyst was $200m^2/g$ before use, however, was reduced to $47.162m^2/g$ after 24 months and therefore showed that despite the decrease in specific surface area as time passed, there was no significant influence on the performance. Having operated Mn-Cu metallic oxide catalyst systems for at least two years on a site where there was no inflow of toxins like sulfur compounds and acidic gases, we were able to confirm that elimination efficiency of at least 90% was maintained.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.139-147
• /
• 2017

Most of the information prevailing in the Internet space consists of textual information. So one of the main topics regarding the huge document analyses that are required in the "big data" era is the development of an automated understanding system for textual data; accordingly, the automation of the keyword extraction for text summarization and abstraction is a typical research problem. But the simple listing of a few keywords is insufficient to reveal the complex semantic structures of the general texts. In this paper, a text-visualization method that constructs a graph by computing the related degrees from the selected keywords of the target text is developed; therefore, two construction models that provide the edge relation are proposed for the computing of the relation degree among keywords, as follows: influence-interval model and word- distance model. The finally visualized graph from the keyword-derived edge relation is more flexible and useful for the display of the meaning structure of the target text; furthermore, this abstract graph enables a fast and easy understanding of the target text. The authors' experiment showed that the proposed abstract-graph model is superior to the keyword list for the attainment of a semantic and comparitive understanding of text.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.3
• /
• pp.1-10
• /
• 2018

This study proposes an immersive interaction optimized for the user's experience environment to provide an improved presence for both HMD and Non-HMD users in the asymmetric virtual reality (VR) environment. The core of the proposed immersive interaction is to distinguish the differences of the asymmetric environment between the HMD and Non-HMD users and present the optimized interaction to the user. And, in order to increase the presence by providing improved immersion in the asymmetric virtual reality environment given to each user, we design the walking interaction to improve the immersion of space for the HMD users, a hand-based interface that improves immersion by fully understanding and managing the situation through direct control. Finally, through the experiment using questionnaire, it is verified that the immersive interaction provides all users with an enhanced presence and specialized experience in each environment experience. Through these processes, we confirmed that the Non-HMD user can be immersed in an asymmetric virtual reality using by proposed interaction as participant rather than assistant with HMD user.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.46-54
• /
• 2007

In current printer industry, four or more colorants are added for color gamut extension because the gamut of printer is smaller than other devices. However, these additional colorants make a redundancy problem that several combinations of colorants reproduced same color stimulus in colorimetric inverse characterization process. Thus, we propose a method of colorimetric inverse characterization using color correlation between colorant's amount. First, for analyzing the combination of colorants which represent the same color stimulus, we estimate the color stimulus for all combination of colorants by Cellular Yule-Nielsen Spectral Neugebauer printer model. The combination of colorants which has higher color correlation factor comparing combinations of colorant around itself in color space is selected. It can reduced the color difference from the tetrahedral interpolation process which is estimation of the output value(colorants combination) for arbitrary input(color stimulus). The selected combinations of colorants and their color stimulus are stored to the lookup table. In experiment, the CMYKGO printer was used. As a result, the dark region of color gamut was extended and the color tone was more naturally represented.