• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.5
• /
• pp.213-219
• /
• 2014

The source parameters of four earthquakes with magnitude larger than 4.0 nearby the offshore Sinan are analyzed. The waveform inversion method is used for analyzing the source parameters of two events (20 August 2012 and 21 April 2013) with C&B and AK135-c crustal velocity structure models. The source parameters of the other two events (26 July 1994 and 23 March 2003) are obtained from references. Focal mechanisms of the events are strike slip faulting or strike slip faulting with a thrust component. The directions of P-axes of the events are ENE-WSW or NE-SW which are similar to previous studies on P-axes in and around the Korean peninsula. With regard to the events nearby the offshore Sinan, the regional stress, rather than being local stress, is seen to be the result of the combination of tectonic forces from the compression of plates colliding to the Eurasian Plate.

• ETRI Journal
• /
• v.11 no.4
• /
• pp.75-83
• /
• 1989

The diffusion mechanism of Si in GaAs was investigated using different diffusion sources based on the Si-Ga-As ternary phase equilibria. The Si profiles are measured with secondary ion mass spectrometry and differ significantly for sources taken from the different phase fields in the ternary phase diagram. Neutral As vacancy diffusion is proposed for acceptor Si diffusion anneals using a Ga - Si - GaAs source. Donor Si diffusion using As - rich sources and a Si -GaAs tie line source shows concentration dependent diffusion behavior. Concentration dependent diffusion coefficients of donor Si for As - rich source diffusion were found to be related to net ionized donor concentration and showed three regimes of different behavior: saturation regime, intermediate regime,and intrinsic regime. Ga vacancies are proposed to be responsible for donor Si diffusionin GaAs: $Si_Ga^+V_Ga^-$ (donor Si -acceptor Gavacancy) complex for the extrinsic regime and neutral $V_G$a, for the intrinsic regime.The Si - GaAs tie line source resulted in two branch profiles, intermediate between the As - rich and the Ga - rich source diffusion cases.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.62.3-62.3
• /
• 2019

After first identification of electromagnetic counterpart of gravitational wave source (GW170817), era of multi-messenger astronomy has begun. For specifying coordinate, magnitude, and host galaxy information, optical follow-up observation of GW source becomes important. With following engineering run and O3 run of LIGO and VIRGO starting in March 2019, we present searching strategy for optical counterpart of GW source using KMTNet. 24 hours monitoring system and large field of view (4 square-degree) of KMTNet are advantage to discover a transient like GW event. By performing tiling observation of high probability area in GW localization map, we expect to observe early light-curve of GW optical counterpart. After identification, follow-up observation with various KMTNet bands and other telescopes like Gemini and UKIRT will also be performed. We will study collision mechanism, progenitor, and characteristics of host galaxy using observation data of GW source.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.6
• /
• pp.236-243
• /
• 2004

The oxide etching process was characterized in a magnetically enhanced reactive ion etching (MERIE) reactor with a $CHF_3CF_4$ gas chemistry. A statistical experimental design plus one center point was used to characterize relationships between process factors and etch response. The etch response modeled are etch rate, etch selectivity to TiN and uniformity. Etching uniformity was improved with increasing $CF_4$ flow ratio, increasing source power, and increasing pressure depending on source power. Characterization of via etching in $CHF_3CF_4$ MERIE using neural networks was successfully executed giving to highly valuable information about etching mechanism and optimum etching condition. It was found that etching uniformity was closely related to surface polymerization, DC bias, TiN and uniformity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.9 no.3
• /
• pp.250-256
• /
• 1985

With the advant of thryistors having large peak inverse voltages, current-source inverters are becoming very popular to feed induction motors. But it is very difficult to analysis the commutation. Since the actual variation of current during commutation is neither instantaneous nor linear and is effected by many parameters. Minimized bias-time of reverse voltages during commutation is expressed in term of machine parameters, capacitor voltage, load current and so on. The minimized bias-time is computed with y and z and also the commuation mechanism is tested on 2.2 kw induction motor. The computed results are compared with the experimental results, and the results give a good information for designing the commutation mechanism.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.97-116
• /
• 1999

The growing demand for the real time traffic information is bringing about the category and number of traffic collection mechanism in the era of ITS. There are, however, two problems in making data into information using various traffic data. First, the information making process of making data into the representative information, for each traffic collection mechanism, for the specified analysis periods is required. Second, the integration process of fusing each representative information into "the information" for each link out of each source is also required. That is, both data reduction and/or data to information process and information fusion are required. This article is focusing on the development of information fusing algorithm based on voting technique, fuzzy regression, and, Bayesian pooling technique for estimating the dynamic link travel time of networks. The proposed algorithm has been validated using the field experiment data out of GPS probes and detectors over the roadways and the estimated link travel time from the algorithm is proved to be more useful than the mere arithmetic mean from each traffic source.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_1
• /
• pp.29-33
• /
• 2001

A numerical simulation was carried out to investigate the mechanism of snowfall around the Seoul region during a cold air-outbreak in the winter season. A particular case was selected for this study(Dec. 19, 1999). The inflow directions of the synoptic flow in the upper and lower levels were westerly and north-westerly, respectively. Plus, there was a deep trough and thermal ridge at a level of 500/700/850 hPa over the Bal-Hae region, in the northern part of the Korean peninsula. According to the model results, snowfall occurred around the Seoul region with the simultaneous existence of a strong static instability in the lower atmosphere, northerly or westerly dry air advection, and strong thermal advection toward the Seoul region. There was a strong convergence thereby indicating the existence of convective rolls in the clouds. The main energy source of convection over the Yellow sea was a sensible heat flux. The main moisture source was convection. Radiative cooling in the cloud layer intensified the static instability in the lower atmosphere.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.4
• /
• pp.296-308
• /
• 2001

A fully nonlinear Boussinesq equation of Wei et al. is finite differenced by Adams predictor-corrector method. A spatially distributed source function and sponge layers are used to reduce the reflected waves in the domain and wale breaking mechanism is included in the equation. The generated waves are found to be good and the corresponding wale heights are very close to the target values. The shoaling of solitary wave and transformation of regular wave over submerged shelf were simulated successfully. The characteristics of breaking mechanism was identified through the numerical experiment and the results of two dimensional wave propagation test over the spherical shoal showed the importance of nonlinear wave model.

• Journal of Internet Computing and Services
• /
• v.6 no.1
• /
• pp.13-25
• /
• 2005

Distributed Denial-of-Service(DDoS) attack prevent users from accessing services on the target network by spoofing its origin source address with a large volume of traffic. The objective of IP Traceback is to determine the real attack sources, as well as the full path taken by the attack packets. Existing IP Traceback methods can be categorized as proactive or reactive tracing. Existing PPM based tracing scheme(such as router node appending, sampling and edge sampling) insert traceback information in IP packet header for IP Traceback. But, these schemes did not provide enhanced performance in DDoS attack. In this paper, we propose a 'TTL based advanced Packet Marking' mechanism for IP Traceback. Proposed mechanism can detect and control DDoS traffic on router and can generate marked packet for reconstructing origin DDoS attack source, by which we can diminish network overload and enhance traceback performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.841-848
• /
• 1997

Combustion of gaseous fuel combustor in a high temperature vitiated air stream was studied with computer simulation. It is for application to afterburner of gas turbine engine which the exact mechanism is not yet clarified. As the jet velocity from fuel nozzle is very high and the geometry of combustor is three dimensional complex structure, many time and money are required to have good results. To consider this demerit, it is simplified to 2-dimensional and modified with the nozzle hole area to same area of annual status. As the thickness of annual is too thin, it is to divide with the many grids for reasonable results. Accordingly, new method which injected fuel mass, momentum and energy are added to source terms of each governing conservation equation as a source terms is introduced like as two phase analysis. Reaction rate is determined by taking into account the Arrhenius reaction based on a single step reaction mechanism. It is focused to temperature and product concentration distribution at each equivalence ratio of inlet hot product.