• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1054-1064
• /
• 2002

Numerical prediction of welding-induced residual stresses using the finite element method has been a common practice in the development or refinement of welded product designs. Various researchers have studied several thermal models associated with the welding process. Among these thermal models, ramp heat input and double-ellipsoid moving source have been investigated. These heat-source models predict the temperature fields and history with or without accuracy. However, these models can predict the thermal characteristics of the welding process that influence the formation of the inherent plastic strains, which ultimately determines the final state of residual stresses in the weldment. The magnitude and distribution of residual stresses are compared. Although the two models predict similar magnitude of the longitudinal stress, the double-ellipsoid moving source model predicts wider tensile stress zones than the other one. And, both the ramp heating and moving source models predict the stress results in reasonable agreement with the experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.66-72
• /
• 2008

In this study, the ground source heat pump was installed at a research center in Jeju Island to verify the performance of the system and to give an information for a economic feasibility. The performance test was conducted until the heat storage tank temperature reached at $5^{\circ}C$ from $50^{\circ}C$ in the cooling operation, and until the storage temperature goes up to $50^{\circ}C$ from $10^{\circ}C$ in the heating mode. As results, the system performance shows that $2.2{\sim}3.5$ for the cooling operation and $2.5{\sim}3.5$ for heating operation. It is found that the underground is good heat source for the heat pump with $3{\sim}10^{\circ}C$ variation range. The ground source heat pump could be connected one of air conditioning system without any problem in system performance. Based on the economic analysis, the initial cost for the ground source heat pump will be compensated after 4 years operation. If the system runs 20 years, approximately 300 million Won will be saved when the air conditioning system adapt the ground source heat pump based on Life Cycle Cost analysis.

• 한국전자통신학회논문지
• /
• 제11권11호
• /
• pp.1113-1120
• /
• 2016

소비자들이 이용하는 정보채널에 따라 소비자가 중요하게 평가하는 여행사 서비스품질 속성에는 차이가 있을 것이라는 문제의식을 가지고 본 연구를 진행하였으며 선행연구를 통해서 여행상품 구매자들은 무형의 서비스상품을 구매하기 위해서 다양한 정보채널을 활용해 여행사의 서비스품질을 평가하고 있으며 일반적으로 정보탐색에 이용되는 채널(인적채널, 영업장방문채널, 미디어 채널)을 통한 정보탐색 활동의 노력에 따라서 서비스품질속성에 대한 중요도 평가에는 유의한 차이가 있음이 나타났다.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.106-112
• /
• 2014

This paper presents the analysis of connected operation of photo voltaic source and Li energy storage system. The micro-grid has been installed and operated for several years at the campus of USF and has been a role of test bed. Photo voltaic source has been strongly influenced by the location, weather and climate of a installed area and Li battery is connected directly to the photo voltaic source to compensate for the limitations. The Li battery is operated to supply power output to the grid by the charging or discharging mode based on the average power output of the PV source which is calculated from monitored data for several years. The load of the PV and Li battery system is operated as a severe loading condition and the operating characteristics of PV source and Li battery are analyzed in detail. In connected operations of PV and Li battery to power system, the PV and Li battery is operated to supply constant power during only day time or peak time to increase load shedding ratio and efficient usage of generation sources in power system.

• 한국전자파학회논문지
• /
• 제10권2호
• /
• pp.227-236
• /
• 1999

유한 차분 시간 영역법 (Finite Difference Time Domain Method FDTD)은 다양한 마이크로파 회로를 해석하는데 널리 이용된다. 그런데 이를 위한 기존의 소스 모델링 방법은 제한이 많고, 일반적인 형태의 회로 에 적용하기 어렵다. 따라서 본 논문에서는 여러 가지 마이크로파 회로를 효율적으로 해석하기 위해 내부 저 항 소스 모델링 (Internal Resistive Source M$\alpha$ieling)을 적용한다. 몇 개의 마이크로파 회로에 대하여 하드 소스 모델령 (Hard Source M$\alpha$ieling)을 이용한 결과와 비교하여 계산 시간이 현저하게 단축됨을 보이므로서 그 효율성을 입증하고, 기존의 소스 모텔링을 이용한 결과 및 측정치와도 비교함으로써 정확성을 입증한다.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1060-1067
• /
• 2004

To apply an analysis method of life cycle cost when assessing economics of equipment system, we should basically set up preconditions such as useful life, price escalation rate, interest rate, etc. as well as consider a calculation algorism of source energy and heat source system, which is a complex process for life cycle costing. For this reason, equipment designers tend to plan heat source systems, without a thorough investigation on economics of alternative systems at the pre-design phase. In this process, architectural designers should adopt a proper heat source system, which is one of the most important factors for planning an appropriate architectural design, through a discussion with equipment designers in a short time. In order to offer an evaluation method for equipment designers to analyze economics of an alternative heat source system easily at the pre-design phase, this research would define the simplified economics, evaluation method through analysis of existing papers for economics evaluation, and examine validity through comparison of simplified method values ($LCC_{EC}$) and life cycle costing values ($LCC_{15}$) for six alternative heat source systems.

• Wind and Structures
• /
• 제27권6호
• /
• pp.417-430
• /
• 2018

The concentration fields in the proximities of a local gas emission source are experimentally analyzed in several combinations of wind incidences and source emissions. These conditions are determined by the plume buoyancy, emission velocity and incident flow wind speed. Concentration measurements are performed by an aspirating probe in a boundary layer wind tunnel. The analysis included the mean concentration values and the intensity of concentration fluctuations in a neutral atmospheric boundary layer flow. Different configurations are tested: an isolated stack in a homogeneous terrain and a stack with a bluff body in close proximity, located windward and leeward from the emission source. The experimental mean concentration values are contrasted with Gaussian profiles and the dilution factor is analyzed with respect to the empirical curves of the minimum dilution. Finally, a study on the plume intermittency is performed in a cross-sectional plane near the emission source. It is possible to highlight the following observations: a) plume vertical asymmetry in the case of an isolated emission source, b) significant differences in the dispersion process related to the relative location of the emission source and bluff body effects, and c) different probabilistic behavior of the concentration fluctuation data in a cross-sectional measurement plane inside the plume.

• 가족자원경영과 정책
• /
• 제12권1호
• /
• pp.57-89
• /
• 2008

Using the data of 'middle-and old-aged people' in the 6th year(2003) of KLIPS(Korea Labor and Income Panel Study), this study compared entirely retired men's income source and amount of income divided by the time of retirement and analyzed the determinants of main income source and amount of income level using Multinomial Logit Analysis and Tobit Analysis. The results of these were as following; First, Entirely retired men has average 1.27 income source and the amount of income from main income source is positioned at 85% of total income. This result indicates the lack of variety to get opportunities of income sources for the living and also means high risk associated with the entirely retired men if he looses the main income source. Second, most of income source of entirely retired men is spouse's earned income or private income transfers, however, if we divide those as timing of retirement and characters of each individual, it is represented that the most of income source is differentiated by the position at labor market during work life and the opportunity for building the wealth, and the possibility of obtaining public pension and public support. Third, the income level depends on what sort of income source the retired men has, this shows that there is not a strong relationship between obtaining a Income source and gaining above the certain level of income.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1172-1180
• /
• 2017

The application of Monte Carlo (MC) to large-scale fixed-source problems has recently become possible with new hybrid methods that automate generation of parameters for variance reduction techniques. Two common variance reduction techniques, weight windows and source biasing, have been automated and popularized by the consistent adjoint-driven importance sampling (CADIS) method. This method uses the adjoint solution from an inexpensive deterministic calculation to define a consistent set of weight windows and source particles for a subsequent MC calculation. One of the motivations for source consistency is to avoid the splitting or rouletting of particles at birth, which requires computational resources. However, it is not always possible or desirable to implement such consistency, which results in inconsistent source biasing. This paper develops an original framework that mathematically expresses the coupling of the weight window and source biasing techniques, allowing the authors to explore the impact of inconsistent source sampling on the variance of MC results. A numerical experiment supports this new framework and suggests that certain classes of problems may be relatively insensitive to inconsistent source sampling schemes with moderate levels of splitting and rouletting.

• 한국지열·수열에너지학회논문집
• /
• 제17권2호
• /
• pp.11-19
• /
• 2021

In this study, combined heat source heat pump system was implemented with 4 single heat source heat pumps each applied with a geothermal source and a water source. Five cases (Case1~Case5) were configured to conduct a performance comparison and analysis of the combined heat source heat pump system. First of all, as a result of analyzing the heat source, the case when 4 ground heat sources were applied (Case1) showed a uniform EST(Entering Source Temperature) distribution throughout the year since it is less affected by outside air compared to the case when 4 water heat sources were applied (Case5). In both winter and summer, the ground heat source maintained higher EST than the water heat source. Therefore, the system with high ratio of geothermal sources is advantageous for heating, and with high ratio of water heat sources is advantageous for cooling.