• Child Health Nursing Research
• /
• 제10권3호
• /
• pp.251-261
• /
• 2004

Purpose: To investigate the degree and sources of stress which fathers of infants in NICU experience. Method: Eighty-five fathers of NICU infants at 5 university hospitals in Seoul volunteered to complete the Parental Stressor Scale for NICU (PSS: NICU) from September 1, to October 15, 2002. Result: Total perceived stress was 3.50±0.76. The highest score were in Parental Role Alteration (3.76±0.83) and Appearance and Behavior (3.65±1.04). The total perceived stress score (PSS), correlated significantly with method (t=3.50, p=.01), and route (F=5.30, p=.00) of feeding. Light & Sound correlated significantly with birth weight (F=3.39, p=.02), medical diagnosis(F=2.30, p=.03), plan of operation(t=2.50, p=.01), operation (t=3.80, p=.02), method (F=4.90, p=.003), and route (F=4.70, p=.00) of feeding. Infant Appearance and Behavior correlated significantly with birth weight (F=5.12, p=.01), plan of operation (t=2.50, p=.01), method (F=3.50, p=.01), and route (F=7.80, p=.00) of feeding. Parental Role Alteration correlated significantly with care of incubator (t=-.68, p=.03), method of feeding (F=2.80, p=.04) and education level of father (F=3.00, p=.05). Conclusion: Father with NICU infants were concerned mostly with parental role alteration and infant appearance. Nursing intervention should include fathers of NICU infants.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.655-669
• /
• 1995

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus is very important. In this study, amalgam 0 cavity was prepared on maxillary first premolar. Two dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2, 2/3 of intercuspal distance) were varied. Three or four-nodal mesh were used for the two dimensional finite element models. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. 1S model was sound tooth with no amalgam cavity. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed von Mises stress, 1 and 2 directional normal stress and Y and Z axis translation with FEM software Super SAPII Version 5.2 (Algor Interactive System Co.) and hardware 486 DX2 PC. The results were as :follows : 1. 1S model was slightly different with 1B model in stress distibution. 1S, 2B, 3B, 4B models showed similiar stress distribution. 2. 1S model and four B models showed similiar pattern in Y axis and Z axis translation. 3. 1S model and four B models showed the bending phenomenon in the translation. 4. As increasing of the width of the cavity, experimental group was similiar with the control group in stress distribution. 5. As increasing of the width of the cavity, experimental group was similiar with the control group in Y and Z axis tranlation.

• 융합신호처리학회논문지
• /
• 제16권2호
• /
• pp.50-55
• /
• 2015

자기공명영상 촬영시 발생되는 소음은 100 dB정도의 큰 소리로 인체에 심리적 생리적으로 많은 영향을 미친다. 따라서 본 연구는 자기공명영상 소음에 따른 성인 남녀의 심박동변이률 신호의 주파수 분석을 통해 스트레스 정도를 분석하였다. 실험 방법은 귀마개를 착용하여 안정상태에서 15분간 심전도 신호를 측정하였다. 그 후 자기공명영상 장비에서 측정한 약 100dB의 음원을 30분동안 들으면서 동시에 심전도 신호를 측정하였다. 약 100 dB정도에서의 자기공명영상 소음은 HRV 분석 결과 교감신경과 부교감신경간의 불균형을 초래하여 스트레스 상태를 유발하였다. 안정 상태에서 10분까지 최대의 스트레스 상태를 나타내고, 15분부터는 스트레스 정도가 줄어들어 30분에는 안정 상태 보다 높은 스트레스 상태를 나타내었다. 본 연구를 기초 자료로 하여 자기공명영상 촬영 종사자들은 환자의 청각보호에 관심을 가지고, 자기공명영상 소음에 관한 객관적인 지표연구가 필요할 것으로 사료된다.

• 터널과지하공간
• /
• 제25권2호
• /
• pp.144-154
• /
• 2015

암석시료에 응력이 가해질 경우 역학적 에너지가 대상 물체에 누적되고, 대상 암석에 한계응력 이상이 가해질 경우 시료의 파괴가 발생한다. 이 때 시료 내부에 저장되어 있던 역학적 에너지는 물리적 변형뿐만 아니라 빛, 열, 소리 등 다양한 형태의 에너지로 발산된다. 본 연구에서는 $-10^{\circ}C$ 저온 환경에서 섬록암, 현무암, 응회암을 대상으로 일축압축강도 시험과 점하중강도 시험을 수행하고, 이때 발생하는 온도 변화를 열적외선카메라를 이용해 측정하고 정량적으로 분석하였다. 파괴 직전 파괴면에 응력이 집중되어 온도가 상승하였고, 파괴 순간 축적된 에너지가 열에너지의 형태로 방출되며 파괴면의 온도가 급격히 상승하는 것이 감지되었다. 강도가 높고 신선한 섬록암과 현무암 시료의 온도 상승폭이 상대적으로 강도가 낮고 풍화된 암석인 응회암 시료의 온도 상승폭에 비해 더 크게 나타났다. 본 연구결과는 저온지역에 위치한 암반사면, 터널, 광산 내부의 응력 집중지점을 감지해 향후 발생 가능한 재해를 예방하는데 적용될 수 있으며, 지진예측을 위한 위성영상 분석에도 적용될 것으로 기대된다.

• 소성∙가공
• /
• 제16권4호
• /
• pp.293-298
• /
• 2007

Recently, there is a need to produce a large forged part for the flight, shipping, some energies, and military industries, etc. Therefore, an open die forging technique of cast ingots is required to obtain higher quality of large size forged parts. Cogging process is one of the primary stages in many open die forging processes. In the cogging process prior to some open die forging processes, internal cavities have to be eliminated for defect-free. The present work is concerned with the elimination of the internal cavities in large ingots so as to obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis is performed to investigate the overlap defect of cast ingots during cogging stage. The measured flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of cavity closure is performed by using the $DEFORM^{TM}-3D$. The calculated results of cavity closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the cavity closure can be investigated by the comparison between practical experiment and numerical analysis.

• Smart Structures and Systems
• /
• 제21권6호
• /
• pp.715-725
• /
• 2018

Truss-Z (TZ) is an Extremely Modular System (EMS). Such systems allow for creation of structurally sound free-form structures, are comprised of as few types of modules as possible, and are not constrained by a regular tessellation of space. Their objective is to create spatial structures in given environments connecting given terminals without self-intersections and obstacle-intersections. TZ is a skeletal modular system for creating free-form pedestrian ramps and ramp networks. The previous research on TZ focused on global discrete geometric optimization of the spatial configuration of modules. This paper reports on the first attempts at structural optimization of the module for a single-branch TZ. The internal topology and the sizing of module beams are subject to optimization. An important challenge is that the module is to be universal: it must be designed for the worst case scenario, as defined by the module position within a TZ branch and the geometric configuration of the branch itself. There are four variations of each module, and the number of unique TZ configurations grows exponentially with the branch length. The aim is to obtain minimum-mass modules with the von Mises equivalent stress constrained under certain design load. The resulting modules are further evaluated also in terms of the typical structural criterion of compliance.

• Structural Engineering and Mechanics
• /
• 제44권6호
• /
• pp.815-837
• /
• 2012

A plated beam is strengthened by bonding a thin plate to the tension face; it often fails because of premature debonding of the thin plate from the original beam in a brittle manner. A sound understanding of the mechanism of such debonding failure is very important for the effective use of this strengthening technique. This paper presents an improved analytical solution for interfacial stresses that incorporates multiple loading conditions simultaneously, including prestress, mechanical and thermal loads, and the effects of adherend shear deformations and curvature mismatches between the beam and the plate. Simply supported beams bonded with a thin prestressing plate and subjected to both mechanical and thermal loading were considered in the present work. The effects of the curvature mismatch and adherend shear deformations of the beam and plate were investigated and compared. The main mechanisms affecting the distribution of interfacial stresses were analyzed. Both the normal and shear stresses were found to be significantly influenced by the coupled effects of the elastic moduli with the ratios $E_a/E_b$ and $E_a/E_p$.

• 산업공학
• /
• 제18권2호
• /
• pp.158-166
• /
• 2005

Human-error and mental stress caused by psychophysiological dissonance between people and artificial environments have become a social problem. And it is a common knowledge that comfort environment reduces human-error and mental stress. Comfort sensibility is related to complex interactions between fabric, climatic, physiological and psychological variables. Currently, comfort sensibility has been evaluated by many sensory tests. However, it is difficult to evaluate comfort sensibility because a concrete concept of comfort sensibility is hard to define. In this paper, we propose a model to evaluate the comfort sensibility using Fuzzy-weighted score on an individual's subjective state for the stimulus. To represent the degree of comfort sensibility level for the stimulus, we represent comfort sensibility using 2 dimensional sensibility vector model. And we use the fuzzy-weighted score that is a fuzzy version of the weighted checklist technique computerized for evaluating the subjects. As an example, this model is applied to 1/f fluctuation sound evaluation. The results show that this model can be effectively used to the quantitative evaluation of comfort sensibility for the stimulus.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.651-655
• /
• 2004

This paper studies the designing method and application for grommets, rubber material used to absorb vibration on the air conditioner compressor. The existing grommet with hardness 40 degrees, EPDM, has the high transmissibility on the compressor that causes additional structure born sound. The problem for EPDM is transformation over long time usage possibly due to its design in which stress is concentrated on a certain position. In order to resolve it, silicon material was previously used with the same design in some models. The vibration performance did improve, but the cost became high. Below are the major developments regarding improvements in compressor rubber material, vibration performance and durability through design change, and new grommet to attain cost reduction. 1 The optimum grommet design for stress even distribution through FEM methods. 2. Comparison for grommet material and design for improved transmissibility. 3. Assess for grommets durability and product applications.

• 한국음향학회지
• /
• 제26권7호
• /
• pp.306-316
• /
• 2007

이 연구는 사운드스케이프라는 청각적 경관의 개념에 기초하여, 계절에 따라 도시 거리의 청각적 경관에서 나타나는 경관요소, 경관특징, 경관인상에 대한 한국인의 청각선호도를 조사하여, 청각적 경관의 구성요인과 계절의 요인이 어떻게 상호작용하여 청각선호도에 영향을 미치는 지를 파악하는 것이다. 캡션평가법이라는 환경심리 조사수법을 이용하여 45명의 대학생들이 4계절 동안 남원시의 거리를 걸으면서 듣고 느낀 청각적 경관에서 나타나는 경관요소, 경관특징, 경관인상의 요인과 계절의 상호작용 효과를 단순요인 분산분석과 비모수 일원배치 분산분석하였다. 분석결과, 청각적 경관의 경관요소, 경관특징, 경관인상과 계절 사이에 상호작용 효과가 있으며, 각 경관의 구성요인들이 청각선호도에 영향을 미치는 것으로 나타났다. 경관요소의 계절별 선호도는 봄, 여름, 가을에는 자연음이, 겨울에는 사회음의 선호도가 높게 나타났다. 경관특징의 계절별 선호도는 봄, 여름 및 겨울에는 양태가, 그리고 가을은 주변관계가 중요한 영향을 미치고 있다. 경관인상의 계절별 선호도는 봄과 겨울은 소리특성이, 그리고 여름과 가을은 거리의 분위기라는 경관인상이 중요한 영향을 미치고 있다. 이 연구의 결과는 사운드스케이프 디자인에 있어서 계절에 따라 어떠한 청각적 경관의 경관요소, 경관특징, 경관인상을 배려하는 것이 바람직한 것인가, 그 양부를 판정할 수 있는 유용한 자료로써 활용할 수 있다.