1 |
Arslan, G., Sevuk, F. and Ekiz, I. (2008), "Steel plate contribution to load-carrying capacity of retrofitted RC beams", Constr. Build. Mater., 22, 143-153.
DOI
ScienceOn
|
2 |
Ascione, L. and Feo, L. (2000), "Modelling of composite/concrete interface of RC beams strengthened with composite laminates", Compos. Part B-Eng., 31, 535-540.
DOI
ScienceOn
|
3 |
Barnes, R.A. and Mays, G.C. (2001), "The transfer of stress through a steel to concrete adhesive bond", Int. J. Adhes. Adhes., 21, 495-502.
DOI
ScienceOn
|
4 |
Benachour, A., Benyoucef, S., Tounsi, A. and Adda bedia, E.A. (2008), "Interfacial stress analysis of steel beams reinforced with bonded prestressed FRP plate", Eng. Struct., 30, 3305-3315.
DOI
ScienceOn
|
5 |
Benyoucef, S., Tounsi, A., Meftah, S.A. and Adda Bedia, E.A. (2006), "Approximate analysis of the interfacial stress concentrations in FRP-RC hybrid beams", Compos. Interfaces, 13(7), 561-571.
DOI
ScienceOn
|
6 |
Bonacci, J.F. and Maalej, M. (2001), "Behavioral trends of RC beams strengthened with externally bonded FRP", J. Compos. Constr. ASCE, 5(2), 102-113.
DOI
ScienceOn
|
7 |
Chen, J.F. and Teng, J.G. (2003), "Shear capacity of FRP-strengthened RC beams: FRP debonding", Constr. Build. Mater., 17, 27-41.
DOI
ScienceOn
|
8 |
Deng, J., Lee, M.M.K. and Moy, S.S.J. (2004), "Stress analysis of steel beams reinforced with a bonded CFRP plate", Compos. Struct., 65, 205-215.
DOI
ScienceOn
|
9 |
Etman, E.E. and Beeby, A.W. (2000), "Experimental program and analytical study of bond stress distributions on a composite plate bonded to a reinforced concrete beam", Cement Concrete Compos., 22, 281-291.
DOI
ScienceOn
|
10 |
Fanning, P.J. and Kelly, O. (2001), "Ultimate response of RC beams strengthened with CFRP plates", J. Compos. Constrt. ASCE, 5(2), 122-127.
DOI
ScienceOn
|
11 |
Gao, B., Leung, C.K.Y. and Kim, J.K. (2005), "Prediction of concrete cover separation failure for RC beams strengthened with CFRP strips", Eng. Struct., 27(2), 177-189.
DOI
ScienceOn
|
12 |
Garden, H.N., Quantrill, R.J., Hollaway, L.C., Thorne, A.M. and Parke, G.A.R. (1998), "An experimental study of the anchorage length of carbon fiber composite plates used to strengthen reinforced concrete beams", Constr. Build. Mater., 12, 203-219.
DOI
ScienceOn
|
13 |
Hao, S.W., Li, Y.Y., Sun, J., Liu, Q., Wang, B. and Yang, H.Z. (2010), "A coupling solution for interfacial stresses in a plated beam", J. Strain Anal. Eng., 45(7), 513-521.
DOI
ScienceOn
|
14 |
Jones, R., Swamy, R.N. and Charif, A. (1988), "Plate separation and anchorage of reinforced concrete beams strengthened by epoxy bonded steel plates", Struct. Eng., 66(5), 85-94.
|
15 |
Kelmar, E.L., Hordijk, D.A. and Hermes, M.C.J. (2008), "The influence of temperature on RC beams strengthened with externally bonded CFRP reinforcement", Heron, 53(3), 157-185.
|
16 |
Maalej, M. and Bian, Y. (2001), "Interfacial shear stress concentration in FRP-strengthened beams", Compos. Struct., 54, 417-426.
DOI
ScienceOn
|
17 |
Maalej, M. and Leong, K.S. (2005), "Effect of beam size and FRP thickness on interfacial shear stress concentration and failure mode of FRP-strengthened beams", Compos. Sci. Technol., 65, 1148-1158.
DOI
ScienceOn
|
18 |
Malek, A.M., Saadatmanesh, H. and Ehsani, M.R. (1998), "Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(1), 142-152.
|
19 |
Oehlers, D.J. (1992), "Reinforced concrete beams with plates glued to their soffits", J. Struct. Eng. ASCE, 118(8), 2023-2038.
DOI
|
20 |
Rabinovitch, O. (2010), "Impact of thermal loads on interfacial debonding in FRP strengthened beams", Int. J. Solids Struct., 47, 3234-3244.
DOI
ScienceOn
|
21 |
Rabinovich, O. and Frostig, Y. (2000), "Closed-form high-order analysis of RC beams strengthened with FRP strips", J. Compos. Constr. ASCE, 4(2), 65-74.
DOI
ScienceOn
|
22 |
Rahimi, H. and Hutchinson, A. (2001), "Concrete beams strengthened with externally bonded FRP plates", J. Compos. Constr. ASCE, 5(1), 44-56.
DOI
ScienceOn
|
23 |
Roberts, T.M. and Haji-Kazemi, H. (1989), "A theoretical study of the behaviour of reinforced concrete beams strengthened by externally bonded steel plates", P. I. Civil Eng. PT 2, 87, 39-55.
|
24 |
Raoof, M., El-Rimawi, J.A. and Hassanen, M.A.H. (2000), "Theoretical and experimental study on externally plated RC beams", Eng. Struct., 22, 85-101.
DOI
ScienceOn
|
25 |
Rasheed, H.A. and Pervaiz, S. (2002), "Bond slip analysis of fiber-reinforced polymer-strengthened beams", J. Eng. Mech., 128, 78-86.
DOI
ScienceOn
|
26 |
Roberts, T.M. (1989), "Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams", Struct. Eng., 67(12), 229-233.
|
27 |
Saadatmanesh, H. and Ehsani, M.R. (1991), "RC beams strengthened with GFRP plates: I. Experimental study", J. Struct. Eng. ASCE, 117(11), 3417-3433.
DOI
|
28 |
Schnerch, D., Dawood, M., Rizkalla, S. and Stamford, K. (2006), "Bond behavior of CFRP strengthened steel structures", Adv. Struct. Eng., 9(6), 805-817.
DOI
ScienceOn
|
29 |
Shen, H.S., Teng, J.G. and Yang, J. (2001), "Interfacial stresses in beams and slabs bonded with a thin plate", J. Eng. Mech. ASCE, 127(4), 399-406.
DOI
ScienceOn
|
30 |
Smith, S.T. and Teng, J.G. (2002a), "FRP-strengthened RC beams. I: Review of debonding strength models", Eng. Struct., 24(4), 385-395.
DOI
ScienceOn
|
31 |
Smith, S.T. and Teng, J.G. (2002b), "FRP-strengthened RC beams. II: Assessment of debonding strength models", Eng. Struct., 24(4), 397-417.
DOI
ScienceOn
|
32 |
Smith, S.T. and Teng, J.G. (2001), "Interfacial stresses in plated beams", Eng. Struct., 23(7), 857-871.
DOI
ScienceOn
|
33 |
Stratford, T. and Cadei, J. (2006), "Elastic analysis of adhesion stresses for the design of a strengthening plate bonded to a beam", Constr. Build. Mater., 20, 34-45.
DOI
ScienceOn
|
34 |
Swamy, R.N., Jones, R. and Charif, A. (1989), "The effect of external plate reinforcement on the strengthening of structurally damaged RC beams", Struct. Eng., 67(3), 45-56.
|
35 |
Tounsi, A. and Benyoucef, S. (2007), "Interfacial stresses in externally FRP-plated concrete beams", Int. J. Adhes. Adhes., 27, 207-215.
DOI
ScienceOn
|
36 |
Taljsten, B. (1997), "Strengthening of beams by plate bonding", J. Mater. Civil. Eng. ASCE, 9(4), 206-212.
DOI
ScienceOn
|
37 |
Teng, J.G., Zhang, J.W. and Smith, S.T. (2002), "Interfacial stresses in RC beams bonded with a soffit plate: a finite element study", Constr. Build. Mater., 16(1), 1-14.
DOI
ScienceOn
|
38 |
Tounsi, A. (2006), "Improved theoretical solution for interfacial stresses in concrete beams strengthened with FRP plate", Int. J. Solids Struct., 43, 4154-4174.
DOI
ScienceOn
|
39 |
Tounsi, A., Hassaine Daouadji, T., Benyoucef, S. and Addabedia, E.A. (2009), "Interfacial stresses in FRP-plated RC beams: Effect of adherend shear deformations", Int. J. Adhes. Adhes., 29, 343-351.
DOI
ScienceOn
|
40 |
Tsai, M.Y., Oplinger, D.W. and Morton, J. (1998), "Improved theoretical solutions for adhesive lap joints", Int. J. Solids Struct., 35(12), 1163-1185.
DOI
ScienceOn
|
41 |
Wang, J. (2006), "Debonding of FRP-plated reinforced concrete beam, a bond-slip analysis. I. Theoretical formulation", Int. J. Solids Struct., 43, 6649-6664.
DOI
ScienceOn
|
42 |
Wang, J. and Zhang, C. (2010), "A three-parameter elastic foundation model for interface stresses in curved beams externally strengthened by a thin FRP plate", Int. J. Solids Struct., 47, 998-1006.
DOI
ScienceOn
|
43 |
Yang, J., Chen, J.F. and Teng, J.G. (2009), "Interfacial stress analysis of plated beams under symmetric mechanical and thermal loading", Constr. Build. Mater., 23, 2973-2987.
DOI
ScienceOn
|
44 |
Yang, J. and Wu, Y.F. (2007), "Interfacial stresses of FRP strengthened concrete beams: Effect of shear deformation", Compos. Struct., 80, 343-351.
DOI
ScienceOn
|
45 |
Yang, J. and Ye, J. (2010), "An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach", Int. J. Mech. Sci., 52, 13-30.
DOI
ScienceOn
|
46 |
Ahmed, O., Van Gemert, D. and Vandewalle, L. (2001), "Improved model for plate-end shear of CFRP strengthened RC beams", Cem. Concr. Compos., 23, 3-19.
DOI
ScienceOn
|
47 |
Arduini, M., Di-Tommaso, A. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams", ACI Struct. J., 94(4), 363-369.
|
48 |
Ziraba, Y.N. and Baluch, M.H. (1995), "Computational model for reinforced concrete beams strengthened by epoxy bonded steel plates", Finite Elem. Anal. Des., 20, 253-271.
DOI
ScienceOn
|
49 |
Yao, J. and Teng, J.G. (2007), "Plate end debonding in FRP-plated RC beams-I: Experiments", Eng. Struct., 29, 2457-2471.
DOI
ScienceOn
|