• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.437-442
• /
• 2018

In this paper, we propose a method for estimating the position of a source in a closed form when a single source has coherently distributed property against a circular array. When a sound source reaches a sensor through multipath environments, it is seen as a distributed source and can be represented by four variables: the nominal azimuth, nominal elevation, azimuth angular spread, elevation angular spread. Therefore, it requires a lot of computation by a search method such as DSPE (Distributed Source Parameter Estimator). In this paper, we propose a method of estimating the nominal azimuth and elevation angle in a closed form using correlation function and least squares method for fast position estimation. In particular, if the source is assumed as Gaussian distribution model, the standard deviation is also estimated in a closed form. In the simulation, the validity of the proposed method is confirmed by comparing with the DSPE.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.28-36
• /
• 2018

The experimental results of the model tests for the twin propeller cavitation noise are presented. The model test was carried out by means of procedure of noise measurement followed by the signal processing and full-scale extrapolation. In order to convert the measured sound pressure level into the sound source level, transfer function measurements for three conditions were performed according to the combination of locations and number of virtual sources. White noise and LFM signal were used as a source signals to examine the influence of the input signal. For the twin propellers, 5 transfer functions were defined and the results were discussed. Cavitation noise measurement tests were performed similarly to the transfer function measurement test. Noise source localization analysis was performed to confirm the test effectiveness. It was confirmed that the source level of the twin propeller can be estimated reliably by using transfer function corrections. Finally, the model test results were converted into full-scale by applying the ITTC '87 model-ship scaling raw, and the validity of the model test was confirmed by comparison with the full-scale measurement result.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.155-160
• /
• 2004

배열센서를 사용한 표적의 위치 추정은 레이다 및 소나에서 잘 알려진 문제이다. 최근에 Lee 등은 1 차원 수평 선배열 센서만을 사용하여 다중경로를 통해 들어오는 신호로부터 표적의 3 차원 위치를 추정하였다. 그러나 이 알고리즘에서 수중에서의 음속은 수심에 관계없이 일정하다고 가정하였기 때문에 음속이 수심에 따라 다양하게 변화하는 실제 수중환경에서는 그 추정성능이 현저히 저하된다. 따라서 본 논문에서는 표적의 거리, 깊이, 방위각으로 구성되는 3 차원 위치 추정을 위해 비균일 음속환경에서의 음파전달모델(ray propagation model)을 이용한 ML 기법(maximum likelihood estimation)을 적용하였으며 일정한 음속을 가정한 Lee 기법의 추정치를 초기값으로 한 탐색을 통해 ML 기법의 연산량을 감소시켰다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1252-1261
• /
• 2006

This paper summarizes theoretical work on the multichannel decentralized feedback control of sound radiation from aircraft trim panels using piezoceramic actuators. The aircraft trim panels are generally honeycomb structures designed to meet the design requirement of low weight and high stiffness. They are resiliently-mounted to the fuselage for the passive reduction of noise transmission. It is motivated by the localization of reduction in vibration of single channel active trim panels. 12-channel decentralized feedback control systems are investigated in terms of the reduction of noise and vibration for three configurations of sensor actuator pairs. Local coupling of the closely-spaced sensor and actuator pairs was modeled using single degree of freedom systems. The multichannel control system is characterized using the state-space model. For the stability point of view, the relative stability or robustness is evaluated by comparing the real part of eigenvalues of the system matrix for the three configurations. The control performance is also evaluated and compared for the three configurations. It is found that the multichannel system can lead to the globalization of the reduction in vibration and radiated noise. It does not appear to yield a significant improvement in the vibration because of decreased gain margin. However, the reduction in the radiated noise is remarkably improved due to the variation of the vibration pattern with the actuation configurations.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.153-165
• /
• 2005

The main purpose of a spatial audio system is to give a listener the same impression as if he/she were present in a recorded environment. A dummy head microphone is generally used for such purposes. Because of its human-like shape, we can obtain good spatial sound images. However, its shape is a restriction on its public use and it is difficult to convert a 2-channel recording into multi-channel signals for an efficient rendering over a multi-speaker arrangement. In order to solve the problems mentioned above, a spatial audio system is proposed that uses multiple microphones on a rigid sphere. The system has five microphones placed on special points of the rigid sphere, and it generates audio signals for headphone, stereo, stereo dipole, 4-channel, and 5-channel reproduction environments. Subjective localization experiments show that front/back confusion, which is a common limitation of spatial audio systems using the dummy head microphone, can be reduced dramatically in 4-channel and 5-channel reproduction environments and can be reduced slightly in a headphone reproduction.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.67-73
• /
• 2001

The shallow-water environment presents additional challenges arising from the complex interaction patterns of the sound with the sea bed. In order to overcome the difficulties generated by shallow-water propagation, broad-band matched field processing has been employed in an effort to increase robustness by utilizing multiple frequency information. In this paper, a coherent broad-band matched field processor is introduced that incorporates the spatial coherence of the acoustic field not only over one frequency but across frequencies. The incoherent and coherent processors are applied to the experimental data where it is shown that both processors give a high probability of correct localization. Also it is found that a coherent processor has better performance in the sidelobe pattern of ambiguity surfaces.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.501-510
• /
• 2016

Capabilities of several beamforming techniques are compared for estimating the position of a moving source. Beamforming has enabled to widen our perspective of aeroacoustics in wind tunnel experiments and has provided useful approach in array measurements. Meanwhile beamforming techniques have been developed in a way to improve estimation accuracy and to save ing effort at the same time. In order to achieve reasonable outcome from aeroacoustic measurement, it is important to identify the spectral characteristics of source and to select an appropriate beamformer. Though aeroacoustic sources normally generates broadband noises, many array signal processing have been focused on narrowband processing which makes calculation numerically efficient. However, calculation in frequency-domain requires selection of single frequency of interest which affects spatial resolution and sidelobe level as a consequence. To be able to localize broadband noise source, it is proposed to use broadband beamforming. The formulas implements the deletion of diagonal term from cross spectral matrix. In this study, trajectory of flying source emitting broadband noise was simulated and several beamformers are applied.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1361-1369
• /
• 2000

For the implementation of 3D Sound Localization system, the binaural filtering by HRTFs is generally employed. But the HRTF filter is of high order and its coefficients for all directions have to be stored, which imposes a rather large memory requirement. To cope with this, research works have centered on obtaining low dimensional HRTF representations without significant loss of information and synthesizing the original HRTF efficiently, by means of feature extraction methods for multivariate dat including PCA. In these researches, conventional linear PCA was applied to the frequency domain HRTF data and using relatively small number of principal components the original HRTFs could be synthesized in approximation. In this paper we applied neural network based nonlinear PCA model (NLPCA) and the nonlinear PLS repression model (NLPLS) for this low dimensional HRTF modeling and analyze the results in comparison with the PCA. The NLPCA that performs projection of data onto the nonlinear surfaces showed the capability of more efficient HRTF feature extraction than linear PCA and the NLPLS regression model that incorporates the direction information in feature extraction yielded more stable results in synthesizing general HRTFs not included in the model training.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1433-1436
• /
• 2005

임베디드 시스템의 발전으로 현재 진보된 로봇 시스템들은 운영 체제, 비젼 시스템 및 센서 시스템들을 별도의 호스트 PC의 도움 없이 독립적으로 탑재하여 가동 시킬 수 있다. 본 논문에서는 임베디드 시스템을 이용한 SBER (Small Biped Entertainment Robot)에 필요한 로봇의 제어기 구조와 로봇에 최적화된 임베디드 시스템을 구현한다. 또한 주 프로세서와 주 컨트롤러를 탑재한 최적화된 소형 엔터테인먼트 이족 로봇 개발을 목적으로 한다. SBER은 TI사의 DSP인 TMS320LF2407A를 로봇의 주 컨트롤러로 사용하여 로봇의 관절 제어를 통한 기본적인 보행 실험과 음원의 위치를 파악하기 위한 음원 위치 추적 문제를(Sound Localization) 수행한다. 또한 Intel사의 PXA255A를 주 프로세서로 사용하여 연산량이 높은 영상처리 알고리즘과 감정 표현, 장애물 인식 및 장애물 회피를 적용하여 보다 지능적인 로봇 시스템을 구현한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1302-1309
• /
• 2014

In this paper, we propose a method to improve the performance of the direction-of-arrival (DOA) estimation of a speech source using a multiple signal classification (MUSIC)-based algorithm. Basically, the proposed algorithm utilizes a complex coefficient band pass filter to generate the narrow band signals for signal analysis. Also, reverberation component reduction and quadratic function-based response approximation in MUSIC spatial spectrum are utilized to improve the accuracy of DOA estimation. Experimental results show that the proposed method outperforms the well-known generalized cross-correlation (GCC)-based DOA estimation algorithm in the aspect of the estimation error and success rate, respectively.Abstract should be placed here. These instructions give you guidelines for preparing papers for JICCE.