• Fibers and Polymers
• /
• 제2권4호
• /
• pp.196-202
• /
• 2001

In order to investigate the relationship between subjective sensation for fabric sound and touch and the objective measurements, eight different apparel fabrics were selected as specimens. Sound parameters of fabrics including level pressure of total sound (LPT), level range (ΔL), and frequency differences (Δf) and mechanical properties by Kawabata Evaluation System (KES) were obtained. For subjective evaluation, seven aspects of the sound (softness, loudness, pleasantness, sharpness, clearness, roughness, and highness) and eight of the tough (hardness, smoothness, fineness, coolness, pliability, crispness, heaviness, and thickness) were rated using semantic differential scale. Polyester ultrasuede was evaluated to sound softer and more pleasant while polyester taffeta to sound louder and rougher than any other fabrics. Wool fabric such as worsted and woolen showed similar sensation for sound but differed in some touch sensation in that woolen was coarseast, heaviest, and thickest in touch. In the prediction model for sound sensation, LPT affected positively subjective roughness and highness as well as loudness, while ΔL was found as a parameter related positively with softness and pleasantness. Touch sensation was explained by some of mechanical properties such as surface, compressional, shear, and bending properties implying that a touch sensation could be expressed by a variety of properties.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.320-328
• /
• 2005

Last target of architectural acoustics is that people wish to convey voice effectively from the space adaptively in use purpose in building. But, how exactly through space sound (sound source) that wish to deliver from indoor can be passed method to do quantification and evaluate quantity of sound by method to serve indoor architectural acoustics estimation summer period and methods to estimate definition propose. This Study searches special quality of sound source about MLS signal that is occurred short-answer sound source (pistol sound source) and nondirectional speaker among indoor sound estimation method, and measure and analyzed reverberation time (RT60), definition (C80, D50) by regulation of each ISO 3382 in age place (classroom, hall, gymnasium). Analysis result and sound factor among could know that d of two sound sources converges in measurement error extent about reverberation time (RT60) of analysis incidental and sound factors and value shows change irregularly about sound factor of D50, C80, pistol sound source judged there is problem. Also, could know that problem is happened in deflection except reverberation time is in deflection analysis with wave that measure each in fixed distance in branch. Finally, when differ size of sound source and measure about change of sound pressure level in case measure sound pressure level giving difference about 10 dB, sound factor could know that there is no different effect.

• 한국화재소방학회논문지
• /
• 제25권2호
• /
• pp.101-106
• /
• 2011

본 연구에서는 예기치 않는 화재 등의 재해가 돌발적으로 발생하였을 경우 소리 정보에 의해서 사람들을 적극적으로 올바른 방향으로 피난 유도시키려면 피난자가 유도 정보의 내용을 알아들을 뿐만 아니라 피난 방향도 지각할 수 있는 것이 필요하다. 이에 피난 유도음의 방향을 감지할 수 있는 선행음 효과를 이용하여 각 건물공간에서 선행음과 후속음에 대해서 음압레벨 변화와 지연시간 변화에 따른 청감실험 결과 즉, 최적의 음성 피난유도음을 도출하였다. 각 실내공간에서 최적의 음성 피난 유도음은 다음과 같다. 1) 강의실 공간에서 음성 피난 유도음의 최적의 조건은 선행음보다 후속음이 지연시간을 10ms~50ms 갖는 경우와 선행음과 후속음의 음압레벨 차이가 없거나 선행음이 높은 경우에 선행음 방향에 대하여 양호하게 인지하였다. 2) 복도 공간에서의 최적의 음성 피난 유도음은 선행음보다 후속음이 지연시간 20~60ms인 경우에 선행음에 대하여 양호하게 인지하였다. 3) 체육관에서는 최적의 음성 피난유도음은 선행음보다 후속음이 지연시간 10~40ms인 경우와 선행음이 후속음보다 음압레벨이 크거나 같은 경우에 선행음에 대하여 양호하게 인지하였다.

• 한국화재소방학회논문지
• /
• 제34권4호
• /
• pp.29-35
• /
• 2020

본 연구는 단독주택에 설치된 단독경보형감지기의 성능을 조사하기 위해 수행되었다. 1층 주택 2개 및 2층 주택이 포함된 세 가지 유형의 주택을 대상으로 실험을 실시하였다. 주거 공간에서 경보음 발생에 따른 음압 레벨을 예측하기 위해 컴퓨터 시뮬레이션 프로그램을 사용하였다. 시뮬레이션에 적용된 음원의 특성을 직접 측정하여 입력 데이터로 사용했다. 시뮬레이션 결과, 부엌과 거실에서의 음압레벨이 탐지기의 경보음이 발생했을 때 기준을 충족시키는 것으로 나타났다. 그러나 침실에서의 음압레벨은 미국화재방지협회 기준인 75 dB(A)보다 최소 20 dB(A) 낮을 것으로 예상되었다. 따라서 주택 내부의 침실 공간에서 충분한 음압레벨을 유지하기 위한 계획을 수립해야 하며, 관련 표준을 제정하여 화재시 안전한 대피를 보장하기 위한 노력이 필요하다.

• 소음진동
• /
• 제10권2호
• /
• pp.345-352
• /
• 2000

최근 여객선이 고속화, 고금화되고 있는 추세에 따라 선실내 소음 저감이 중요한 설계 요소로 간주되고 있다. 일반적으로 선박 소으믄 음암레벨로 평가되나 여객선의 경우 승객에게 더욱 쾌적한 환경을 제공하기 위하여 음질을 개선할 필요가 있다. 본 연구에서는 연근해를 운항 중인 기존 고속 여객선의 소음을 계측하고, 정신음향학 분야에서 제시된 Zwicker Loudness 계산식에 의거하여 음의 크기, 거칙기, 변동세기 및 날카로움으로 음질을 평가하였다. 또한, 각각의 음질 평가요소와 음압간의 상관관계를 분석하였다. 상기 결과로부터 고속여객선의 음의 크기는 음압과 비례하는 반면에 음의 거질치 (roughness),변동세기(fluctuation strength)및 날카로움(sharpness)은 선박의 운동과 추락변동 등으로 인하여 음압과 비선형적인 상관관계를 나타냄을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.340-349
• /
• 2016

A coupled room system consists of adjacent rooms and apertures where the sound energy is exchanged between the two rooms. Acoustically, a coupled room system shows a non-exponential decay profile. Most of the related researches have been to analyze the acoustic properties of two-room coupled system so far whereas three-room coupled system were seldom studied. In this regard, this paper aims to analyse the distribution of sound pressure level, sound decay curve of three-room coupled system and sound energy flow between them by using the acoustic diffusion model and to further verify them through experiments. Firstly, the sound pressure level distribution and mean sound pressure level in the steady-state condition are analyzed at various frequencies and source locations. Good agreements are observed in both experiments and analysis results. Secondly, two double slope effect quantifiers of sound attenuation, LDT/EDT and LDT/T10 are compared at various frequencies and for different source locations. The result indicates that LDT/T10, less affected by the early reflection patterns than LDT/EDT, is more suitable to the analysis and experiments of a multi-slope sound decay curve. Lastly, the sound energy flow in each room is analyzed based on the acoustic diffusion model. After the early decay stage, the sound energy is observed to flow from the room with a long reverberation time to the room with a short one.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.580-584
• /
• 2011

Sound power is one of the most significant factors to predict and assess noise from sound source. However, many researchers developed indirect methods to calculate the sound power with noise level because it is impossible to measure sound power directly while a train is running. In this paper, we proposes a method to estimate separately each sound power for rolling noise and propulsive noise with the noise emitted from rolling stocks and verifies the validity of the estimation method using other sound power estimation formula.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.584-590
• /
• 1994

A theoretical model has been developed to analyze the jet-edge interaction and the sound radiation. The edge responding to the sinuous impinging jet is regarded as an array of dipoles and their strength is determined by the boundary condition on the edge surface. The surface pressure distribution and the edgeforce are estimated using these dipoles. Then the pressure amplitude and directivity of the sound field is obtained by summing the radiating sounds from the dipole sources. It is found that the effective source is located a little distance downstream from the edge tip. And the directivity of the sound radiation is cardioid pattern near the edge but dipole pattern far from the edge. The theoretical model is confirmed by comparing the theoretical prediction of the edgeforce and sound pressure level with available experimental data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.275-285
• /
• 1996

A noise measurement method of the multi-sound sources in a reverberation field with wave-guide is developed by experimental method. In the reverberation field, it is very hard to measure sound level or noise spectra of a certain sound source, when many sound sources generate noise simultaneously with a small space between them. Flexible wave-guide(tube) was used to measure noise level in a reverberation field. One end of the tube is attached to a sound source and the other end is closed with an anechoic terminal. Detailed method of the measurement and the source of error was considered as well.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.366-370
• /
• 2006

In this study, characteristics of impact force and impact sound of impact source such as bang machine, impact ball, and children's jumping were review. Results of review showed that impact ball has most similar characteristic to real impact sources in terms of objective properties such as impact force and impact sound. The effects of various isolator on floor impact sound were also investigated in apartment building and test facilities building using bang machine an impact ball. From the field measurement, it was found that the difference in reduction sound level between bang machine and impact ball was relatively large and the reduction sound level by impact ball was much larger than bang machine.