• 제목/요약/키워드: sound change in Korean

검색결과 466건 처리시간 0.03초

성악인에서 발성 시 음의 높낮이에 따른 성도 길이의 변화 (The Change of the Length of Vocal Tract in Singers according to the Phonation at Different Levels of Pitch)

  • 반재호;김창규;이상혁;이경철;진성민
    • 대한후두음성언어의학회지
    • /
    • 제17권1호
    • /
    • pp.14-16
    • /
    • 2006
  • Background and Objectives: The purpose of this study is to investigate the change of vocal tract length according to the level of the pitch by the singers. Materials and Methods: Fifteen tenors were asked to produce successive /a/ sound in G4(382Hz) for the head register, C3(131Hz) for the chest register and usual speaking sound. The control group consisted of 15 males of an similar age who are not professional singers. The length of vocal tract was calculated by applying the formula of Fn=(2n-1) c/4L(F : formant frequency, c : the speed of sound in the vocal tract(350m/sec), L : length of vocal tract, $n=1,2,3,4,{\ldots}{\infty}$). Results: In singer's group, there showed no significant statistical difference of length among head and chest register and usual speaking sound. However in the control group, there showed statistically significant difference of length. Comparison of the absolute difference in the length of vocal tract by changing level of pitch in phonation, between the control group and the singers group. Changing from G4 phonation to C3 phonation and C3 phonation to usual speaking sound showed statistically difference of vocal tract length was less in the singers group than the control group. Conclusion: The change of vocal tract length, in either speaking or singing, was less in singers than the control group. We could assume that the singers maintain their larynx position constantly throughout the pitch range when phonation.

  • PDF

국악기 피리의 소리합성을 위한 음색분석 연구 (A Study on the Spectrum Analysis for the Sound Synthesis of Piri)

  • 김혜지;윤혜정;조형제;김준
    • 한국멀티미디어학회논문지
    • /
    • 제9권7호
    • /
    • pp.801-807
    • /
    • 2006
  • 본 연구는 국악기 피리의 소리합성을 위한 기초 단계로, 피리의 음색 특징을 분석하였다 분석은 세 가지로 나누어 첫째, 피리의 음색 특징을 스펙트럼 분석을 통하여 오보에와 비교하였고, 둘째, 피리 소리들의 어택(attack)부분의 시간대별 분석을 통하여 소리 발생과정에 따른 음색을 분석하였으며, 마지막으로 악기연주의 중요한 역할을 하는 비브라토의 특성을 분석해 보았다. 그 결과 피리 음색은 서양악기와 달리 높은 배음들의 음량이 높게 나타났고, 소리발생 초기단계(어택 부분)에서는 노이즈 양이 급격히 줄어드는 것과 반하여 배음들의 음량 값이 높아졌으며, 비브라토에서도 음량위주로 변화하는 서양악기와 달리 음고와 음량이 동시에 변화한다는 특성을 알 수 있었다. 이러한 배음에 따른 음색 특징과 소리 발생과정에서의 음색변화, 그리고 비브라토에서의 음고와 음량 변화는 피리의 독특한 음색을 잘 나타내 주는 특징들로써 소리합성에 있어서 반드시 적용되어져야 할 것이다.

  • PDF

기계소(機械騷) 음(音)과 회전(回轉) 속도(速度) (An Effect of Revolutions Per Minute (r.p.m) in the Noise Characteristics)

  • 차봉석
    • Journal of Preventive Medicine and Public Health
    • /
    • 제10권1호
    • /
    • pp.94-101
    • /
    • 1977
  • Noise pollution, both in the environment and in the workplace, has been recognized as a major health hazard -one that can impair not only a person's hearing but also his physical and mental well-being. As industrialization progresses, the prevalence rate of occupational diseases is increasing, especially hearing loss, which has the highest prevalence rate among the occupational diseases. The major cause of noise is the construction of various large industries without any regulation of noise sources. Therefor, we must establish an enactment to control mechanical noise sources. as soon as possible. For the purpose of controlling the noise source, we must have exact data about such things as the sound level, the frequency of the peak sound and the revolutions per minute (r.p.m.) of the machine (a measure of the power of its motor). This study was undertaken in order to define the noise characteristics, the power of the machine's motor, the change of the sound level and the peak sound as the r.p.m. increases, and the permissible exposure time. The sample size of this study was 74 machines at 11 plants in 6 industries. The results are as follows; 1. The breakdown of the types of mechanical noise noted was : 63.6% continuous normal sound, 26.9% intermittent sound, 4.7% continuous repeating sound and 4.6% impulsive sound. 2. With respect to the type of industry, the overall sound level was the highest in the mechanical industry, with $103.8{\pm}2.8dB(A)$, and lowest in the textile industry, with $89.2{\pm}1.43dB(A)$. 3. With respect to the type of machine, the highest sound level was 124 dB(A) caused by Gauzing(II), in the mechanical industry, and the lowest was 76 dB(A) caused by Attachment (Jup Chack) (I) in the timber industry. 4. The shortest permissible exposure time to Gauzing(II) in the mechanical industry was less than 15 minutes. 5. Among 74 machines, 68.2% of the peak sound was situated in the high frequency range (52.7% at 2 KHz, 4.1% at 4 KHz and 1.4% at 8 KHz). 41.8% of the peak sound was in the middle frequency range (4.1% at 250Hz, 14.8% at 500Hz and 22.9% at 1KHz). 6. If one machine had two motors or more, the peak sound was shifted to the low frequency range. 7. As the r.p.m. increased, the overall and peak sound levels were increased without any change of the frequency of the peak sound. 8. Whenever the machines had the same kind and the same r.p.m., the overall and peak sounds were changed by the physicochemical characteristics of the raw materials and the management.

  • PDF

비대칭 보에 의해 보강된 등방성 평판의 음향방상에 관한 연구 (A study on sound radiation from isotropic plates stiffened by unsymmetrical beams)

  • 김택현;오택열;김종태
    • 대한기계학회논문집A
    • /
    • 제22권4호
    • /
    • pp.753-761
    • /
    • 1998
  • The determination of sound pressure radiated from periodic plate structures is fundamental in the estimation of noise level in aircraft fuselages or ship hull structures. As a robust approach to this problem, here a very general and comprehensive analytical model is developed for predicting the sound radiated by a vibrating plate stiffened by periodically spaced orthogonal unsymmetrical beams subjected to a sinusoidally time varying point load. The plate is assumed to be infinite in extent, and the beams are considered to exert both line force and moment reactions on it. Using this theoretical model, the sound pressure levels on axis in a semi-infinited fluid (water) bounded by the plate were calculated using three numerical tools such as the Gauss-Jordan method, the LU decomposition method and the IMSL numberial package. Especially, the variation in the sound pressure levels and their modes were investigated according to the change in frequency, bay spacing and bay distance.

슬래브의 동특성과 중량충격음의 상관관계에 관한 연구 (Research about correlation of slab vibration mode and heavy-weight floor impact sound)

  • 정진연;이상우;임정빈;정갑철
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.839-843
    • /
    • 2008
  • Receiving room's floor impact sound level is been influenced to various factor of slab thickness, room size, structure etc. This study examined the noise of upper part slab and room mode in receiving room to be importance factor that influence in receiving room level among this factors. According to this study, vibration mode in slab and room mode are concentrated on frequency that is high level relatively. This causes bad effect in floor impact sound level. Therefore, method to reduce floor impact sound level is to change vibration mode using slab upper part's resilient material or reduce room mode in receiving room.

  • PDF

Measurement of Sound Speed Following the Fluid Temperature Using Acoustic Inspection Device

  • Jeon, E.S.;Kim, W.T.;Kim, I.S.;Park, H.
    • 비파괴검사학회지
    • /
    • 제30권3호
    • /
    • pp.207-211
    • /
    • 2010
  • In this paper, the fluid AID(acoustic inspection device) was developed to measure SOS(speed of sound) since fluids used in most of industrial fields have different properties and its equipment is highly expensive. From AID developed, it is intended to get potentially the capability to distinguish the kind of fluid using the measurement by the SOS at various fields. In order to measure the sound speed of specific fluids, the measurement system and ultrasonic sensors are composed. The fluid used in the experimental work are soybean oil, glycerin, diesel oil and the error of time difference due to the container wall is extracted for preliminary experiment. As results, the variations of sound speed according to the temperature change of target fluid were analyzed and the polynomial equations were proposed.

등간격으로 배열된 마이크로폰을 이용한 관내 유량측정 방법 (A Method for the Measurement of Flow Rate in a Pipe Using a Microphone Array)

  • 김용범;김양한
    • 소음진동
    • /
    • 제11권1호
    • /
    • pp.57-67
    • /
    • 2001
  • Proposed in this paper is a method of measurement of the flow rate in a pipe. The sound waves which are propagated within a pipe are characterized by that the wavenumber in the axial direction is changed according to the flow rate, and these characteristics are used in the present method of measurement of the flow rate. The amount of change in wavenumber of sound waves according to the flow rate can be obtained from the relationship among acoustic pressure signals within a pipe, which are measured by using a microphone array. The flow rate can be obtained by using the amount of change in wavenumber of sound waves and the relational equation of the flow rate. With respect to errors that can occur during the measurement of the flow rate, the types of errors and the method of correction of those errors are presented. This method of measurement of the flow rate has application limitation conditions due to the sensor interval, assumption of sound waves as plane waves, etc. The numerical simulation and experiments for measuring the flow rate of air in a pipe are performed in order to verify the applicability of this method of measurement of the flow rate. The experimental results are shown to be similar to those of the numerical simulation. And the flow rate measured is shown to be consistent with the actual value within 5% error bound.

  • PDF

서울 방언 단모음의 소리 변화와 음향 단서 연구: 단일지점 포먼트와 궤적 양상 (Static and dynamic spectral properties of the monophthong vowels in Seoul Korean: Implication on sound change)

  • 강지은;공은정
    • 말소리와 음성과학
    • /
    • 제8권4호
    • /
    • pp.39-47
    • /
    • 2016
  • While acoustic studies in the past decade documented a raised /o/ by showing their lowered first formants (F1) almost overlapped with those of high back vowel /u/, no consensus has been made in terms of how this /o/-raising affects the vowels as a system in Seoul Korean. The current study aimed to investigate the age- and gender-related differences of the relative distance among the vowels to better understand the influence of this on-going sound change on the vowel system. We measured the static and dynamic spectral characteristics (F1 and F2) of the seven Korean monophthong vowels /e a ʌ o u ɨ i/ in the spontaneous speech of Seoul Corpus, and depicted the patterns of 30 individual speakers (10 speakers in each group of teens, 20s and 40s) as a function of age and gender. The static spectral examination showed low F1 values of /o/ in the spontaneous speech corpus confirming the vowel /o/ raising, and also revealed greater F2 values of /u, ɨ/ suggesting their anterior articulations. The tendencies were stronger when the speakers were younger and female. The spectral trajectories further showed that the F1 and F2 between /o/ and /u/ were differentiated throughout the vowel mid-point although the trajectories gradually merged near the vowel mid point in the older male speakers' productions. The acoustic evidence of contrast among /o, u, ɨ/ supports that the raised /o/ is not indicative of a merger with /u/ but rather implying a chain-like vowel shift in the Seoul Korean.

동해에서 저주파 음파전파에 미치는 난수성 소용돌이의 영향 (Influence of a Warm Eddy on Low-frequency Sound Propagation in the East Sea)

  • 김봉채;최복경;김병남
    • Ocean and Polar Research
    • /
    • 제34권3호
    • /
    • pp.325-335
    • /
    • 2012
  • It is well known that sound waves in the sea propagates under the influence of sea surface and bottom roughness, the sound speed profile, the water depth, and the density of sea floor sediment. In particular, an abrupt change of sound speed with depth can greatly affect sound propagation through an eddy. Eddies are frequently generated in the East Sea near the Korean Peninsula. A warm eddy with diameter of about 150 km is often observed, and the sound speed profile is greatly changed within about 400 m of water depth at the center by the eddy around the Ulleung Basin in the East Sea. The characteristics of low-frequency sound propagation across a warm eddy are investigated by a sound propagation model in order to understand the influence of warm eddies. The acoustic rays and propagation losses are calculated by a range-dependent acoustic model in conditions where the eddy is both present and absent. We found that low-frequency sound propagation is affected by the warm eddy, and that the phenomena dominate the upper ocean within 800 m of water depth. The propagation losses of a 100 Hz frequency are variable within ${\pm}15$ dB with depth and range by the warm eddy. Such variations are more pronounced at the deep source near the sound channel axis than the shallow source. Furthermore, low-frequency sound propagation from the eddy center to the eddy edge is more affected by the warm eddy than sound propagation from the eddy edge to the eddy center.

굴곡형 흡입관에서의 소음 방사 해석 (Numerical Study of Sound Radiation from curved intake)

  • 심인보;이덕주;안창수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2002년도 추계 학술대회논문집
    • /
    • pp.88-94
    • /
    • 2002
  • Curved intakes are commonly used from commercial aircraft to military missile. Sound radiation from the intake of air vehicle affects cabin noise, community noise and military detection. In this paper, Sound radiation from curved intake is computed using the high order, high resolution scheme. The generalized characteristic boundary conditions, adaptive nonlinear artificial dissipation model and conformal mapping for high order, high resolution scheme are used. The geometric change of curved intake and the frequency of acoustic source are considered. Two dimensional Euler equations are solved for theses analyses.

  • PDF