• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1216-1222
• /
• 2010

Based on the MacDonald's analytic model for the diffracted sound field of a semi-infinite noise barrier, computer simulations were performed for various positions of error microphones for an active noise barrier system. The simulation process also included the effects of floor reflections on both sides of the barrier. The results were also compared with Niu's simulation results and showed a straight line arrangement of sensors and actuators, in the order of primary source, secondary source and error microphone is better than over the top arrangement of the error microphones.

• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.66-73
• /
• 2010

Vehicles experience the impact due to harsh road conditions. Contact with a barrier on a road induces vehicles to vibrate, which brings about an impact sound. The attenuation of the impact sound is an important issue since passengers may complain about the impact noise. However, the perfect removal of impact noise is not possible as most of impact noise is caused by external conditions. It is thus necessary to make vehicles to possess more desirable sound quality characteristic of impact sound. More research is needed on objective attributes of impact sound; it is not a simple matter since impact noise is transient in nature and has a high level of sound at an instantaneous moment. A new objective attribute of impact noise is designed by using wavelet transform. Wavelet transform is appropriate for the analysis of transient signals such as impact noise. The usefulness of new objective attribute, which is a sound metric, is examined by comparison with the mean subjective rating for real impact noise of passenger cars. The new sound metric has better correlation with the mean subjective rating than already existing sound metrics

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.891-896
• /
• 2005

On the basis of theoretical studies on the effect of the cylinders attached to semi-infinite screens, the tangential sound power-transport parallel to the surface of the attached cylinder is minimized by means of a secondary sound field, which is generated from a part of the attached cylinder. The numerical study shows the possibility of deflecting the incident sound by minimizing the sound field of the upper sections. The acoustical shadow region was more pronounced in both near- and far-field compared to the passive case with rigid surface, i.e. without active control. For a relatively wide frequency range it was possible to enhance shielding effects only with few secondary sources and error microphones. In this paper effects of control parameters on the actively controlled sound field near the top edge of noise barriers are studied. Results of numerical study and model measurements are shown and discussed.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.373-378
• /
• 2007

Today, the use of the sound absorptive material is increasing to improve the room acoustics in the auditorium and music hall, etc. Usually, the sound absorption materials have been used to enhance the performance of a noise barrier and improve the room acoustics in construction site. Generally, the sound absorbtion coefficients are the most important factor reflecting the sound absorbtion performance. There are two methods to measure the sound absorption coefficient. The first one is the reverberation room method, and the second is the impedance tube method. In this study, we measure the sound absorbtion coefficients using these two methods, and then we compared the results of the sound absorbtion coefficients to look into the difference of results between reverberation room method and impedance tube method. Also we compared the results of the sound absorbtion coefficients with respect to the size of sample and the volume of reverberation room. From the experiment, we could see that the sound absorbtion coefficients are measured equally for different sample size. But the sound absorbtion coefficients are measured differently according to test methods and test conditions.

• 한국분무공학회지
• /
• 제18권4호
• /
• pp.209-214
• /
• 2013

The present study aims to determine the optimized shape for the maximum electric energy production of building integrated photovoltaic system (BIPV) noise barrier through numerical analysis. The shape of BIPV noise barrier is one of the important factors in determining angle difference between direction vector of the sun and normal vector of the sound barrier surface. This study simulated numerically the flow and thermal fields for different angles in the range from $90^{\circ}$ to $180^{\circ}$, and from the results, the amount of isolation onto noise barrier surface was estimated along the angle between ground and top side of noise barrier. The commercial CFD code (Fluent V. 13.0) was used for calculation. It was found that the maximum amount of insolation per unit area was 19.6 MJ for $105^{\circ}$ case during a day in summer and was estimated 12.4 MJ in $150^{\circ}$ case during a day in winter. The results of the summer and winter cases showed the different tendency and this result would be useful in determining the appropriate shape of noise barrier which can be mounted under various circumstances.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.275-281
• /
• 2014

This study has been analyzed the sound performance of the noise barriers with respect to the configuration of the front perforated panel geometries and the filled absorption materials. Noise barriers' acoustic performance should be required to meet 0.7 of NRC value at least. The global absorbing performance of the barriers have been investigated by changing the opening ratio of the front perforated panel and the absorbing characteristics of the absorbing material using two microphone method. Therefore, It it possible to obtain to increase acoustic performance of the specific frequency ranges by designing the perforate rates of the front panel and absorbing characteristics of the absorbing materials inside, as well. This study try to find out the possibilities of applying the absorbing noise barrier to railway usage.

• The Journal of the Acoustical Society of Korea
• /
• 제23권2E호
• /
• pp.44-50
• /
• 2004

A theoretical formula that is based on the geometrical theory of diffraction (GTD) is proposed for computing sound diffraction by multiple wedges, barriers, and polygonal-like shapes. The formula can treat both convex and concave edges, where edges mayor may not be inter-connected. Comparisons of theoretical predictions with other results done by the BEM or experiments for scaled model confirm the accuracy of the present formula. Numerical examples such as double wedges and doubly inclined barrier show that when there exist several diffraction paths for given source and receiver positions, the insertion loss is dominated by the diffraction associated with the shortest propagation path.

• 농촌계획
• /
• 제11권2호
• /
• pp.59-69
• /
• 2005

Because of increasing numbers of cars many highways are being constructed lively, and the noise of passing cars has influenced surrounding areas. In consideration of this, some alternatives and researches for soundproof facilities are proceeding, but aesthetic approach hasn't been considered. Therefore, this research is focused on soundproof effects for each types, effectual simulation methods, visual assessment and estimation between the landscape before simulation and the landscape after. Soundproof facilities are divided largely by the soundproof barrier, the soundproof mounding, the soundproof grove. The soundproof grove has three main function. First, leaves and branches absorbs sound vibrations. Second, leaves absorbs sound, and branches obstruct sounds. Third, by means of sounds of shaking leaves, forest can offset noises. This research was proceeded by means of classification of soundproof grove types and investigation of visual simulation methods. We made visual simulation for each types, and estimated the landscape for each types.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.646-650
• /
• 2001

In this paper, it is presented that the effect of air gap insertion in testing the transmission loss of sound barrier using structural vibration system. In this study, we use the APAMAT based on the structure-borne-noise. The measured results show that air gap insertion improves transmission loss as results of test based on the air-borne-noise. The measured results are compared with the predicted transmission loss using the transfer matrix method. The predicted results were found to be in reasonable agreement with measured results.

• 한국강구조학회 논문집
• /
• 제21권6호
• /
• pp.553-561
• /
• 2009

고속도로표지판과 방음벽 등의 도로시설물에 대한 풍하중 위험도해석을 수행하였다. 풍하중의 확률모델은 풍속관측으로부터 추정한 극치분포를 사용하였으며 도로시설물의 구조변수에도 확률적 변동성을 부여하였다. 도로시설물의 안정성에 대한 한계상태함수를 정의하여 신뢰성해석을 수행하였으며 풍속재해도를 고려하여 도로시설물의 위험도 해석을 수행하였다. 고속도로 시설물의 위험도 평가결과 방음벽의 위험도가 도로표지판 보다 매우 높게 평가되었다. 이는 두 시설의 내풍설계 기준이 불일치하기 때문이며 위험도의 균일한 분산을 위해 설계풍압식의 통일 및 개선이 필요함을 보였다.