• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.253-258
• /
• 2019

연소 후 이산화탄소 포집용 고속 유동층 공정에서 사용되는 흡수제를 대량생산할 때, 흡수제 강도를 위해 여러 가지 물질을 사용한다. 본 연구에서는 흡수제 설계시 사용하는 물질 중 하나인 Micro-cell C (MCC)를 사용하여 $K_2CO_3$ 기반 건식 흡수제(KMC)를 제조하였고, 흡수 및 재생 특성을 평가하였다. 흡수반응은 $60^{\circ}C$에서 실험하였고, 재생반응은 $200^{\circ}C$에서 실험하였다. KMC 흡수제의 연속실험 결과, 1 cycle임에도 불구하고 이론흡수능(95.4 mg $CO_2/g$ sorbent)의 약 22%인 21.6 mg $CO_2/g$ sorbent의 낮은 흡수능을 나타내었고, 5 cycle에서는 13.7 mg $CO_2/g$ sorbent의 낮은 흡수능을 나타내었다. XRD 및 TG 분석결과, MCC에 함유된 Ca계 성분으로 인해 제조 및 흡수 과정에서 부반응 물질인 $K_2Ca(CO_3)_2$ 구조가 생성됨에 따라 흡수제가 비활성화된 것을 확인하였다. 또한 흡수제 비활성화 문제를 해결하기 위해, MCC를 $850^{\circ}C$에서 먼저 소성하는 과정을 추가하여 흡수제(KM8)를 제조하였다. KM8 흡수제는 1 cycle에서 95.2 mg $CO_2/g$ sorbent의 높은 흡수능을 나타낼 뿐만 아니라 5 cycle 동안 우수한 재생성을 나타내었다. 따라서 소성단계를 추가함으로써 부반응 원인물질 제거방법을 통해 흡수제의 비활성화를 해결할 수 있음을 확인하였다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.152-156
• /
• 2003

Air pollution problems due to the emission of pollutants from the various industrial facilities become serious issues and lots of air pollution control processes have been developed. To remove the SO$_2$ and NOx emitted from the solid waste incinerator and coal fired power plants, we studied the Ca-based sorbent which was prepared by waste clam and limestone. The objectives of this study were to develop a clam-based sorbent for removal of SO$_2$ and NOx, and to investigate the physicochemical properties of the waste clam sorbent. In order to determine acid gas removal capacity of sorbent, the batch study on SO$_2$ and NOx removal was performed with the Ca-based sorbent in the fixed bed reactor. Results of the research revealed that clam-based sorbent can be used as the iron-manufacturing industry and chemical adsorbents for the removal of acid gases because the lime content of the waste calm was more than 53.92%. From physicochemical analysis and gas reaction experiments, it could be concluded that clam is good sorbent for the removal of SO$_2$ and NOx in waste incinerator and flue gas desulfurization processes.

• 공업화학
• /
• 제23권4호
• /
• pp.383-387
• /
• 2012

This paper presents an easy way to prepare carbon dioxide sorbent by using commercially available fumed silica particles (AEROSIL). AEROSIL was impregnated with various concentration of polyethyleneimine (PEI) in methanol and $CO_2$ capture ability was analyzed by thermo gravity analysis (TGA). The $CO_2$ adsorption capacity of 50 wt% PEI-impregnated AEROSIL was 126.2 mg/g-sorbent at $75^{\circ}C$ and this capacity was substantially higher than that of the mesoporous silica such as HMS (101.0 mg/g-sorbent) and MSU-J (66.1 mg/g-sorbent).

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1093-1097
• /
• 2020

A composite iodine sorbent was obtained in the form of porous polymer matrix with activated carbon particles impregnated with triethylenediamine deposited on its surface. A comparative assessment of the radioactive methyliodide capturing efficiency by the composite sorbent and a sample of industrial charcoal sorbent was conducted. It was shown that under the selected testing conditions, the hydraulic resistance of the composite sorbent is lower, and the sorption capacity is higher than that of the industrial charcoal sorbent. A method for comparing the effectiveness of iodine sorbents, based on the calculation of the ratio of the sorption capacity index to the minimum capacity index, needed for the required purification degree was proposed.

• Korean Chemical Engineering Research
• /
• 제44권3호
• /
• pp.307-313
• /
• 2006

본 연구에서는 석탄 등의 중질 탄소원으로부터 $H_2$를 생산하는 시스템의 일부인 메탄스팀개질 공정에 사용되는 개질촉매와 $CO_2$ 흡착제를 하나로 결합시킨 촉매흡착제를 제조하여 $H_2$ 생산성 및 에너지 효율을 향상시키고자 하였다. 흡착제의 다공성과 표면적 증가를 위해서 1, 5, 10 wt％ 카본블랙을 흡착제 제조 시 사용하였으며, 압축강도와 마모강 도를 증진시키기 위하여 5~10 wt％ $Al_2O_3$를 흡착제에 첨가하였다. SEM, TGA, BET, XRD, 마모측정기와 자체 제작한 흡탈착장치를 사용하여 제조된 흡착제의 열적, 물리적 특성들을 측정하였다. 측정결과, 5 wt％ $Al_2O_3$와 10 wt％ 카본블랙을 첨가한 흡착제가 $7.61kg_f$의 강도와 47％의 흡착능을 나타내어 가장 좋은 물성을 나타내었다. 제조된 흡착제에 메탄스팀개질반응에서 통상적으로 사용되는 Ni, Co, Fe를 10 wt％로 담지하여 촉매흡착제를 제조하였고 각 촉매흡착제에 대하여 메탄스팀개질반응을 수행한 결과, Ni/CaO 촉매흡착제의 반응효율이 가장 우수하였다. 결과적으로 본 연구에서 개발한 촉매흡착제에 의한 메탄스팀개질 반응시스템이 $700{\sim}750^{\circ}C$의 온도에서 기존의 촉매와 흡착제가 분리된 시스템에 비해 5~10％ 높은 $H_2$ 생산성을 나타내었다.

• 대한환경공학회지
• /
• 제29권1호
• /
• pp.47-53
• /
• 2007

본 연구의 목적은 대형 석탄 화력 발전소에 DSI(Dry Sorbent Injection)공법 적용 가능성에 대한 연구로서 전산유체역학(CFD; Computational Fluid Dynamics) 기법을 이용하여 N화력 S화력발전 본부에서 운용중인 500MW급 유연탄 발전시설의 보일러 후단에서 전기 집진기 전단까지 덕트 내의 배기가스에 대한 삼차원 유동장에 대한 전산 해석을 수행하였다. CFD상용코드를 이용하여 DSI공법적용 전 기술적 방향을 제시하였는데 덕트의 형상, 탈황제 분사 위치, 분사 속도에 따른 탈황제의 관내 분산 특성에 대한 연구를 중점으로 하였다. 그 결과 DSI공법 적용에 관한 최적의 조건을 확립하였고 그 중 탈황제의 분산에 가장 큰 영향을 미치는 인자는 덕트형상임을 확인하였으며 이에 Lobed-plate라는 탈황제 분산판을 적용한 결과 덕트 내 탈황제의 고른 분산을 유도할 수 있었다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.407-416
• /
• 2018

This study presents a novel complete solution starting with a synthesis of silica modified with potassium-nickel hexacyanoferrate and ethanolamine (SiEA-KNiFe) sorbent through radiocesium sorption in different process configurations and moving on to the vitrification of the spent sorbent, using the sol-gel method. The experimental data for deionized water solution, as well as seawater solution, correlates strongly with the Langmuir isotherm model. Moreover, the study also presents a method for spent sorbent solidification in the glass matrix. The cesium leaching test confirmed that spent sorbent can be stably bound in the glass matrix after radionuclide removal.

• 동굴
• /
• 제85호
• /
• pp.28-34
• /
• 2008

For trying to frontal attack of new solution by fusion of technical tasks and conditions with it's solving methods of the essential tasks of marine resource development and environmental conservation in addition with elements of electronic high-technologies, the magnetic oil spill adsorbent of Mag-Sorbent* has been prepared and proposed to dispose oil spill from the marine disaster for preventing oil pollution by using them and their system with sequentially circular collection of oil spill mag-sorbent powder and fabrics on the electronic equipment like as barge robot for the scheme of sustainable development of environment-friendly technology. Because of recent marine accident occurred at Tae-An cost and earthquake in Sichuan province were very large scale accident of disaster to prevent and manage of them. So, it was verified from the experiment of electronic demonstrator that the skimmer system of oil spill mag-sorbent powder and fabrics prepared was very effective and useful technique to collect oil spill samples on the water surface specially at the closed space of underground cave. At this point, the barge-based electronic remote control was very useful system operating easily on the marine fields but also water level at the small pool to skim it with the environment-friendly system of the disposing marine disaster and preventing oil pollution using magnetic adsorbents of Mag-Sorbent*.

• 한국환경보건학회지
• /
• 제29권1호
• /
• pp.34-42
• /
• 2003

The objective of this study is to investigate the waste recycling possibility, practicability, economic efficiency and acid gas sorbent use of the hard-shelled mussel. This study is to investigate the hydration/calcination reaction and fixed bed reactor. The physical-chemical characteristics of the hard-shelled mussel were analyzed by ICP SEM-EDX, BET and pore volume. Thus, the results could be summarized as follows; Hard-shelled mussel can be used as iron-manufacture and chemical sorbents considering more than 53.7% of the mussel is lime content. The SO$_2$removal efficiency of the hard-shelled mussel after calcined hydration increased thirty times as a result of the higher pore size, specific surface area and pore volume. Also, the CaO content, pore volume, pore size distribution and specific surface area greatly influenced the SO$_2$ and NOx removal reactivity. The optimum particle diameter average of hard-shelled mussel was $\pm$100 mesh, which was applied to the sorbent on the medium/small scale waste incinerator and flue gas desulfurization processes.

• Advances in environmental research
• /
• 제2권4호
• /
• pp.309-321
• /
• 2013

High AA new high capacity sorbent for preconcentration and determination of nickel in environmental samples was synthesized. The sorbent was synthesized by copolymerization of allyl glaycidyl ether / imminodiacetic acid with N,N-dimethylacrylamide as functional monomers in the presence of N,N-bismethylenacryl amid as cross linker and characterized by Fourier transform infra red spectroscopy, elemental analysis, thermogravimetric analysis and scanning electron microscopy. A recovery of 93.6% was obtained for the metal ion with 0.1 M, sulfuric acid as the eluting agent. The sorption capacity of the functionalized sorbent was 55.9 $mgg^{-1}$. The equilibrium sorption data of Ni(II) on polymeric sorbent were analyzed using Langmuir, Freundlich, Temkin and Redlich.Peterson models. Based on equilibrium adsorption data the Langmuir, Freundlich and Temkin constants were determined 0.87 (L mg-1), 25.87 ($mgg^{-1}$) $(Lmg^{-1})^{1/n}$ and 171.4 ($Jmol^{-1}$) respectively at pH 4.5 and $20^{\circ}C$.