• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.273-273
• /
• 2006

Over the past years, a large number of acrylate polymers have been developed and the overcoat thin layer containing acrylate polymers have been used for TFT-LCD color filter. As forming thin layer using acrylate polymers, the existing acrylate polymers have some problems such as low hardness by low Tg temperature, coating uniformity and solubility in organic solvent. To solve these problems, we synthesized new polymer(Scheme.), containing olefin monomer, which has high Tg temperature, good coating uniformity and good solubility in organic solvent. The overcoat thin layer containing new polymer resulted in good coating uniformity, stain, spot, scratch, heat resistance, DOP(Degree Of Planarization) on RGB glass, transparency, hardness, adhesion, anti-chemicals(anti-acid, anti-base, anti-organic solvent), insulation and anti-humidity. Scheme. The structure of new polymer X = Olefin monomer contains ketone, ester, hydroxy, ether, halogen, nitrile, alkoxy, phenyl functional group $R_1$ and $R_2$= H or $CH_3$. Ratio=0<[1/(1+m+n)]<0.7,0.1[$\leq$[n/(1+m+n)]<0.5.

• Elastomers and Composites
• /
• 제46권4호
• /
• pp.290-294
• /
• 2011

전도성 고분자로 주목을 받고 있는 poly(3,4-ethylenedioxythiophene)- polystyrene sulfonate (PEDOT/PSS)는 분산 용매에 따라서 전기적 특성이 변화한다. 본 논문에서는 고형으로 최근 시판되고 있는 PEDOT/PSS를 물, 에탄올 (EtOH), 에틸렌 글리콜 (EG) 및 디메틸설폭사이드 (DMSO)에 분산시킨 용액을 PET 필름 상에 코팅하여 표면 저항을 측정한 결과, EG 및 DMSO를 사용하였을 경우에 약 100배 정도 더 낮은 표면 저항치를 나타내었다. 코팅된 필름의 열적 특성 및 화학적 특성을 TGA 및 XPS로 분석한 결과, 용매에 따른 차이는 발견되지 않았다. 그러나 분산액 자체의 입도를 분석한 결과, EG 및 DMSO 용액에서는 $1-3{\mu}m$ 정도의 입자로 존재하였으나, 물에서는 $0.1{\mu}m$ 이하의 미세 입자로 존재하는 것을 확인할 수 있었다. 전기적 특성의 차이는 분산 상태에서의 PEDOT/PSS 입자 크기에 영향을 받는 것으로 판단된다.

• 폴리머
• /
• 제25권2호
• /
• pp.246-253
• /
• 2001

야민 말단기를 가지는 PES(6k) 올리고머와 상용 CTBN (1300$\circ$13)으로부터 분자량이 15000g/mol인 PES-CTBN-PES 공중합체를 합성하였으며, 이를 에폭시 수지의 강인화제로 사용하였다. DDS를 경화제로 사용하였으며, 공중합체로 강인화된 에폭시 수지의 열특성, 강인성, 굴골 강도 및 내용매성을 측정하여, PES/CTBN 블렌드로 강인화된 에폭시 수지의 특성과 비교하였다. 공중합체는 용매의 사용없이 에폭시 수지에 40 wt%까지 첨가가 가능하였으며, 굴곡강도 및 내용매성의 저하 없이 40 wt%에서 2.21 mPa${\cdot}m^{0.5}$의 아주 높은 강인성을 보였다. 하지만 PES/CTBN 블렌드로 강인화된 에폭시 수지는 공중합체로 강인화된 시편보다 다소 낮은 강인성, 굴곡강도 및 내용매성을 보였다.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.279-286
• /
• 2013

Application properties of ultra light weight silica aerogel toward polyurethane membranes were investigated. From the results of pre-milling process of the silica aerogel, the solvent for dispersion of the aerogel was determined for methyl ethyl ketone and its content in the solvent was determined by 30%. Using this aerogel dispersion, the polyurethane membranes were prepared according to the mixing amount of silica aerogel and various properties of the membranes were investigated. As results, the optimum mixing amount of silica aerogel inside polyurethane membranes was decided at 11%, because the improvement of light weight property, air permeability, and moisture vapor permeability were improved upto 11% of silica aerogel content, maintaining the water penetration resistance almost unchanged.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권10호
• /
• pp.465-472
• /
• 2002

This paper presents a study on the aging and recovery of HTV (high temperature vulcanized) silicone rubber used for outdoor insulators. UV irradiation, corona discharge and water immersion were employed as factors of the artificial aging. The effects of changes derived from these stresses on the tracking and arc resistance of silicone rubber were examined. We have investigated the aging phenomena of HTV silicone rubber by the above stresses using the surface energy calculation with contact angle measurement, solvent-extraction, and surface/volume resistivity and so on. These results showed that UV irradiation and corona discharge lead to nearly the same surface oxidation, but the percentage change of mobile low molecular weight by these stresses was different. Furthermore, the oxidized layer induced under UV irradiation restricted the recovery of hydrophobic surface. Water immersion little lowered hydrophobicity level and leaded to a loss of tracking and arc resistance. The degradation mechanism based on our results was discussed.

• Journal of Welding and Joining
• /
• 제7권2호
• /
• pp.60-69
• /
• 1989

The present study was aimed at investigating the effect of welding parameters such as welding current, electrode force(or squeeze force) and parts cleaning on the sound weld, and establishing the most reliable weld conditions for HWP(Heavy Water Reactor) fuel end capping with the resistance upset butt welding. Major results obtained are as follows. 1. The amount of sound weld was increased with increasing weld current(5.0-11KA) because the activated diffusion with increasing heat generation played an important role in eliminating the porosity and weld line in the weld interface. 2. It was found that weld current was not significantly influenced by the electrode force although the increase of it caused a slight increase of weld current and upset deformation. 3. Acetone rinsing before drying for the Zircaloy-4 end cap cleaning produced the reliable sound weld because it would remove the remaining solvent and surface films, and provided the uniform contact between the end cap and the tube. 4. The optimum welding conditions for fuel end capping by a resistance upset hytt welding are obtained as follows. weld current: 10-11KA, electrode force: 62-90KPa parts cleaning: vapor degreasing.rarw.water, acetone rinsing.rarw.drying.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.53-61
• /
• 2015

PURPOSES : The objective of this study is to evaluate the SDAR (solvent deasphaltene residue), which is obtained from the solvent deasphalting (SDA) process, as a pavement material. METHODS : The physical properties of the SDAR were evaluated based on its chemical composition, and asphalt mixtures with the SDAR were fabricated and used for the evaluation of mechanical properties. Firstly, the chemical composition of SARA (saturate, aromatic, resin and asphaltene) was analyzed using the TLC-FID (thin-layer chromatography-flame ionization detector). Moreover, the basic material properties of the asphalt binder with the SDAR were evaluated by the penetration test, softening point test, ductility test, and PG (performance grade) grade test. The rheological properties of the asphalt binder with the SDAR were evaluated by the dynamic shear modulus ($G^*$) obtained using the time-temperature superposition (TTS) principle. Secondly, the mechanical properties of the asphalt mixtures with the SDAR were evaluated. The compactibility was evaluated using the gyratory compacter. Moreover, the tensile strength ratio (TSR) was used for evaluating the moisture susceptibility of the asphalt mixtures (i.e., susceptibility to pothole damage). The dynamic modulus $E^*$, which is a fundamental property of the asphalt mixture, obtained at different temperatures and loading cycles, was used to evaluate the mechanical properties of the asphalt mixtures. RESULTS AND CONCLUSION : The SDAR shows stiffer and more brittle behavior than the conventional asphalt binder. As the application of the SDAR directly in the field may cause early failures, such as cracks on pavements, it should be applied with modifiers that can favorably modify the brittleness property of the SDAR. Therefore, if appropriate additives are applied on the SDAR, it can be used as a pavement material because of its low cost and strong resistance to rutting.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.201-207
• /
• 2019

Tungsten heavy alloys (W-Ni-Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

• 멤브레인
• /
• 제31권5호
• /
• pp.363-370
• /
• 2021

본 연구에서는 유기용매에 저항성이 뛰어난 소재인 polyketone 고분자를 사용하여 열유도 상분리법(TIPS)으로 유기용매 저항성 중공사 분리막을 제조하였다. 희석제는 green solvent로 알려진 PEG300, DMSO₂, glycerine을 사용하였으며, 이때 사용된 diluent에 따라 나타나는 구정형 구조를 가지는 고-액 상분리와 bicontinuous한 구조를 가지는 액-액 상분리를 관찰하였다. 전반적인 분리막의 특성은 SEM, 수투과도, 기계적 강도, 내화학실험을 사용하여 고찰하였으며, 본 연구에서는 다양한 희석제가 적용된 polyketone 중공사 분리막의 제조와 그 상호관계에 대해 심도 있게 연구하였다.

• 한국수산과학회지
• /
• 제56권3호
• /
• pp.293-299
• /
• 2023

Acne vulgaris is often associated with acne-related bacteria such as Cutibacterium acnes. In this study, we investigated the antibacterial effects of the methanol extract of the algae Ecklonia cava and its solvent-soluble extract against C. acnes. Among five solvent fractions, the ethyl acetate (EtOAc) fraction exhibited the strongest antibacterial activity against C. acnes. Furthermore, the EtOAc-soluble extract exhibited the highest total phenolic contents among the five solvent fractions tested. The EtOAc subfraction 07 (Fr. 07) extract showed the highest antibacterial effect against C. acnes and isolated C. acnes along with minimum inhibitory concentration (MIC) ranging from 32 to 64 ㎍/mL. Additionally, MICs of antibiotics against antibiotic-resistant C. acnes strains were substantially reduced when antibiotics were combined with Fr. 07, suggesting that Fr. 07 restore the antibacterial activity of the antibiotics. The fractional inhibitory concentration indices clearly revealed an additive synergistic effect of Fr. 07 with antibiotics. The results of the present study suggest a potential role for E. cava in the control of infections related to acne vulgaris.