• Natural Product Sciences
• /
• v.27 no.1
• /
• pp.54-59
• /
• 2021

Bergenia ciliata (Family: Saxifragaceae) is a folklore remedy for the treatment of various ailments in Asian countries. Bergenin (1) has been isolated as an active constituent in many studies, however, the amount of bergenin has not been determined in all parts of the plant. A simple RP-HPLC method was developed to determine the amount of bergenin in methanol extracts of leaves, rhizomes and roots of the plant. Separation was achieved on an Agilent Eclipse XDB-C18 column maintained at 25 ℃ using isocratic solvent system (water: methanol: acetic acid; 62.5:37:0.5 v/v/v) adjusted at pH 2 0 at a flow rate of 1.0 mL/min. and detected at 275 nm. Correlation coefficient (0.9952) showed linearity of concentration (5-200 ㎍/mL) and response. The values of LOD (0.00947 ㎍/mL) and LOQ (0.02869 ㎍/mL) indicated that method was sensitive. The recovery of bergenin was 99.99-100% indicating accuracy of method. The methanol extract of rhizomes contained higher amount of bergenin (19.4%) than roots (9.2%) and leaves (6.9%). It is concluded that methanol extract of rhizomes is a better source of bergenin than other parts of the plant. The findings are useful for standardization of bergenin containing extracts and herbal preparations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.412-417
• /
• 2022

Capacitive-type humidity sensors with a high sensitivity and fast response/recovery times have attracted a great attention in non-contact respiration biological signal monitoring applications. However, complicated fabrication processes involving high-temperature heat treatment for the hygroscopic film is essential in the conventional ceramic-based humidity sensors. In this study, a non-toxic ceramic/metal halide (BaTiO₃(BT)/NaCl) humidity sensor was prepared at room temperature using a solvent-free aerosol deposition process (AD) without any additional process. Currently prepared BT/NaCl humidity sensor shows an excellent sensitivity (245 pF/RH%) and superior response/recovery times (3s/4s) due to the NaCl ionization effect resulting in an immense interfacial polarization. Furthermore, the non-contact respiration signal variation using the BT/NaCl sensor was determined to be over 700% by maintaining the distance of 20 cm between the individual and the sensor. Through the AD-fabricated sensor in this study, we expect to develop a non-contact biological signal monitoring system that can be applied to various fields such as respiratory disease detection and management, infant respiratory signal observation, and touchless skin moisture sensing button.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.78-89
• /
• 2022

ANODE-free Li-metal batteries (AFLMBs) operating with Li of cathode material have attracted enormous attention due to their exceptional energy density originating from anode-free structure in the confined cell volume. However, uncontrolled dendritic growth of lithium on a copper current collector can limit its practical application as it causes fatal issues for stable cycling such as dead Li formation, unstable solid electrolyte interphase, electrolyte exhaustion, and internal short-circuit. To overcome this limitation, here, we report a novel dual-salt electrolyte comprising of 0.2 M LiPF₆ + 3.8 M lithium bis(fluorosulfonyl)imide in a carbonate/ester co-solvent with 5 wt% fluoroethylene carbonate, 2 wt% vinylene carbonate, and 0.2 wt% LiNO₃ additives. Because the dual-salt electrolyte facilitates uniform/dense Li deposition on the current collector and can form robust/ionic conductive LiF-based SEI layer on the deposited Li, a Li/Li symmetrical cell exhibits improved cycling performance and low polarization for over 200 h operation. Furthermore, the anode-free LiFePO₄/Cu cells in the carbonate electrolyte shows significantly enhanced cycling stability compared to the counterparts consisting of different salt ratios. This study shows an importance of electrolyte design guiding uniform Li deposition and forming stable SEI layer for AFLMBs.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4097-4102
• /
• 2024

A dosimetry system's ability to monitor absorbed doses is crucial for the quality assurance and control of products that have been exposed to radiation. Here, we propose a polyvinyl chloride (PVC)-methyl yellow (MY) film as a potential dosimeter for irradiation facilities. The PVC-MY film was prepared with a simple solvent-casting method at different MY concentrations from 0.3 to 1.2 mM. To evaluate the dosimeter's performance, the film was exposed to gamma-irradiation with irradiation doses of 0-25 kGy. The optical characteristics of the films examined using a UV-Vis spectrophotometer showed that the color of the films changed from yellow to red with increasing irradiation doses, and the color change sensitivity of the films increased with increasing MY concentrations. The absorption spectra of the irradiated PVC-MY films showed three maximum absorption peaks at 417, 522, and 547 nm. As irradiation doses increased, the film absorption at 417 nm decreased, while the film absorption at 522 and 547 nm increased. The film's stability studies suggest storage of the irradiated film in a cold-dark conditions is recommended to prevent damage and maintain response stability. The findings in this study emphasize the potential of the PVC-MY film as a dosimeter for irradiation facilities.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.25-33
• /
• 2008

A selective separation of Actirlide(III) by a nPr-BTP/nitrobezene extraction system was studied. The nPr-BTP (2.6-Bis-(5.6-n-propyl-1.2.4-triazin-3-yl)-pyridine) of a environmentally -friendly CHN type was self-synthesized and its compatability with diluent and stability with nitric acid were investigated. At the 0.1M nPr-BTP/nitrobenzene-1M $HNO_3$ and O/A=2, extraction yields of Am used as a representative of Actinide(III) and Eu were about 85% and 8%, respectively, and the other RE elements such as Nd, Ce and Y were extracted less than 3% (separation factor of Am and Eu was about 60). Thus, there was no problems in the selective extraction of Actinide(III) from RE. The stripping yield of Am with 0.05M $HNO_3$ at O/A= 1, however, was about 43% and the maximum stripping yield was 65% at O/A=0.3. It is necessary to develop the stripping system including the stripping agent instead of nitric acid solution.

• Korean Journal of Food Science and Technology
• /
• v.48 no.4
• /
• pp.378-383
• /
• 2016

The glasswort is an edible halophyte demonstrating various physiological effects including anti-inflammatory activity. In the present study, the effects of glasswort extracts on inflammatory events and interactions of THP-1 monocytes with intestinal epithelial cells were investigated. Five solvent fractions, including the ethylether fraction (Fr.E), were prepared from a 70% methanol extract of glasswort. THP-1 monocytes underwent differentiation by phorbol 12-myristate 13-acetate treatment and were then activated by lipopolysaccharide (LPS), which induced cyclooxygenase (COX)-2 expression. None of the glasswort fractions tested alone induced COX-2 in differentiated THP-1 cells. Fr.E, however, enhanced LPS-induced COX-2 expression in differentiated THP-1 cells. Culture media of THP-1 cells treated with each fraction stimulated the growth of normal intestinal INT-407 cells more prominently than that of HT-29 colon cancer cells. COX-2 expression in HT-29 cells was inhibited when the cells were exposed to the THP-1 culture medium treated with Fr.E. Thus, glasswort could modulate the interaction between immune cells and intestinal cells.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.133-143
• /
• 2007

This study was performed to evaluate the co- and sequential separation of Tc, Np and U from the simulated multi-component HLW solution by a TBP (tributyl phosphate)-TOA (tri- octyl amine)/NDD $(n-dodecane)-HNO_3$ extraction system. An optimal condition of (30% TBP-0.5% TOA)/NDD-1 M $HNO_3$ was selected by taking account of a prevention of the 3rd phase and effects of concentration of TBP, TOA and nitric acid on the co-extraction of Tc, Np and U. In that condition, the extraction yields were 81% (Tc), 85% (Np), less than 9% (Am and RE elements), about 8% (Pd), and less than 5% (other elements) so that the system developed for the co-extraction of Tc, Np and U was proved to be available. For that, however, more than 99% of Zr was found to be pre-removed. The co-extracted Tc, Np and U were sequentially separated in order of Tc(stripping agent : 5 M $HNO_3$)${\rightarrow}Np$ by reductive stripping (reductive-stripping agent : 0.1 M AHA)${\rightarrow}U$ (stripping agent : 0.01 M $HNO_3$), and then their separation factors were evaluated. At these conditions, 95% of Tc, 98% of Np and 99% of U could be recovered in each step.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.279-284
• /
• 2001

This paper reports the purification of myomodulin A (MMA) and myomodulin E (MME) from the sea hare. The central nervous systems of 500 sea hare were extracted in an acidified solvent, after which four HPLC column systems were used to obtain pure peptides, The phasic contraction bioassay using a Mytilus edulis anterior byssus retractor muscle (ABRW) was applied to monitor all collected fractions. The pure peptides were submitted to Edman degradation based automated microsequencing. Mass spectrometry and chemical synthesis confirmed the sequence. The primary structures of MMA and MME were Pro-Met-Ser-Met-Leu-Arg-Leu-$NH_2$, (847.41 Da) and Cly-Leu-Gln-Met-Leu-Arg-Leu-$NH_2$, (830.50 Da), respectively. Synthetic peptides showed a modulating activity of phasic contraction in the ABRM of Mrtilus edulis.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.590-595
• /
• 1995

To examine the characteristics of antioxidative compounds from Capsella bursa-pastoris, ethanol extracts were separated into five organic solvent fractions; hexane(Fr.H), diethyl ether (Fr.E), ethyl acetate(Fr.EA), butanol (Fr.B), and water(Fr.D) fractions. Fr.B showed the greatest electron donating ability and inhibitory effect on lipid peroxidation. Whereas Fr.E had the most excellent activity in the superoxide radical scavenging activity by xanthine/xanthine oxidase-cytochrome c reduction system. The inhibitory effect of each fraction on xanthine oxidase was also measured. Fr.E had the strongest inhibitory effect on xanthine oxidase and $IC_{50}$ was $5.65\;{\mu}g$. The results indicate that the superoxide radical scavenging activity of Fr.E is caused by the inhibitory effect on radical generating system of xanthine oxidase. Also the order of inhibitory effect on xanthine oxidase was Fr.B