• 제목/요약/키워드: solvent polarity

검색결과 177건 처리시간 0.023초

상전환법에 의한 다양한 기공크기를 갖는 폴리비닐리덴플루오라이드 막의 제조와 수계 및 비수계 용액 내에서의 막 성능 (Formation of Poly(vinylidene difluoride) Membranes with Various Pore Sizes by a Phase Inversion Process and Membrane Performance of Aqueous and Non-aqueous Solution System)

  • 이규호;김인철
    • 멤브레인
    • /
    • 제15권1호
    • /
    • pp.22-33
    • /
    • 2005
  • 비대칭 폴리비닐리덴플루오라이드(PVDF) 막을 상전환법으로 제조하였다. 도포용액은 PVDF를 용매인 N-ethyl-2-pyrrolidone (NMP)와 비용매인 1,4-dioxane, diethyleneglycol dimethyl ether (DGDE), acetone, (equation omitted)-butyrolactone(GBL)의 혼합용매에 녹여서 제조한다. 여러 첨가제가 도포용액 특성, 투과특성과 막 구조에 미치는 영향을 조사하였다. 응고제인 물과 1,4-dioxane, DGDE, acetone과의 상용성이 NMP보다 낮아서 기공크기가 작아진다. 첨가제의 양을 조절하여 기공크기를 변화시켰다. 혼합용매(수계 및 비수계)가 막의 투과성능에 미치는 영향을 살펴보았다. 용액점도뿐만 아니라 표면장력도 용매 투과특성에 영향을 끼침을 알 수 있었다.

Substituent Effect on Fluorescence and Photoisomerization of 1-(9-Anthryl)-2-(4-Pyridyl)ethenes

  • Shin, Eun-Ju;Lee, Sang-Ha
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권9호
    • /
    • pp.1309-1338
    • /
    • 2002
  • The fluorescence and photoisomerization quantum yields of trans-1-(9-anthryl)-2-(4-pyridyl)ethene (t-4-APyE), 1-(10-methyl-9-anthryl)-2-(4-pyridyl)ethene (t-4-MeAPyE), and 1-(10-chloro-9-anthryl)-2-(4- pyridyl)ethene (t-4-ClAPyE) were measured in cyclohexane, acetonitrile, and methanol at room temperature.Polar solvents result in the drastic reduction of fluorescence quantum yield and increase of photoisomerization quantum yield for all three compounds. These results are probably due to the stabilization of intramolecular charge transfer (ICT) excited state in polar solvent. The higher contribution of ICT in the presence of more electron-donating methyl substituent, manifested by largest positive fluorescence solvatochromism, indicates that the pyridine ring acts as an electron acceptor. Protonation or methylation makes pyridine ring stronger electron acceptor and causes long-wavelength ground state charge transfer absorption band and complete quenching of fluorescence. The fluorescence from t-4-APyE derivatives can be switched off responding external stimuli viz. medium polarity, protonation, or methylation.

Photoaddition Reactions of 1,2-Diketone

  • Park, Hea Jung;Seo, Jung Soo;Yoon, Ung Chan;Cho, Dae Won
    • Rapid Communication in Photoscience
    • /
    • 제1권1호
    • /
    • pp.17-18
    • /
    • 2012
  • Photoaddition reactions between 1,2-dicarbonyl compounds and silyl enol ethers in acetonitrile and benzene were explored. Irradiation of acetonitrile or benzene solutions containing 1,2-diketone, acenaphthalquinone, phenanthrene-quinone and silyl enol ethers is observed to promote the production of 1,4-dioxenes, oxetanes, and ${\beta}$-hydroxyketone by the [4+2]-cycloadditon, Paterno-Buchi processes, and SET promoted Claisen-type condensation. Among these competitive pathways leading to the generation of each types of products, SET promoted 1,4-dioxene and ${\beta}$-hydroxyketone formation are more favored regardless of solvent polarity.

박막 두께에 따른 청동유물 보존처리용 아크릴 수지의 코팅 특성 연구 (Characterization Study of Acrylic Resin for Bronze Artifacts Conservation as Film Thickness)

  • 조현경;조남철
    • 보존과학연구
    • /
    • 통권29호
    • /
    • pp.183-197
    • /
    • 2008
  • Paraloid B-72 of acrylic resins has been widely used as consolidant for bronze artifacts conservation. In previous study, xylene was appropriate for paraloid B-72 when bronze artifacts consolidated. In this study, we compared the coating properties of paraloid B-72 in various concentration levels. The surface before and after coating were observed by optical microscope and AFM. Thickness and adhesive strength of films were tested. For testing coating stability, we performed yellowing test and EIS. After these experiments, we concluded 15wt% paraloid B-72 was adequate concentration for bronze artifacts conservation when paraloid B-72 used in xylene as solvent. Because 15wt% paraloid B-72 has the lowest polarity and high hydrophobic.

  • PDF

2-Anilinonicotinic Acid 유도체 및 이들의 알루미늄 착화합물의 형광학적 고찰 (Native and Aluminum Chelate Fluorescence of 2-(Substituted anilino) nicotinic Acids)

  • 이강춘;이윤중;민신홍
    • 대한화학회지
    • /
    • 제26권3호
    • /
    • pp.142-147
    • /
    • 1982
  • 2-Anilinonicotinic acid를 기본 화합물로한 관련 유도체의 형광특성에 미치는 치환기의 영향을 검토하였다. 각 치환기의 Hammett substituent constant와 형광파장은 직선적인 정량적 관계를 나타내었으며 각 유도체의 알루미늄 착화합물에서도 동일한 경향성을 보였다. 측정용매의 영향은 유도체 및 알루미늄 착화합물에서 공히 용매의 polarity에 대해 정성적인 관련성을 나타내었다.

  • PDF

전착법에서 용액특성이 지르코니아 막형성에 미치는 영향 (Effect of Slurry Property on Preparation of Zirconia Film in Electrophoretic Deposition)

  • 김상우;이병호;손용배;송휴섭
    • 한국세라믹학회지
    • /
    • 제36권9호
    • /
    • pp.991-996
    • /
    • 1999
  • Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.

  • PDF

Dimethylsulfoxide와 몇 가지 유기분자와의 상호작용 (Interactions between Dimethylsulfoxide and Some Organic Molecules)

  • 김시중;신두순
    • 대한화학회지
    • /
    • 제15권6호
    • /
    • pp.352-358
    • /
    • 1971
  • 열가지 유기물질, 즉 니트로벤젠, m-디니트로벤젠, o-디니트로벤젠 1,3,5-트리니트로벤젠, m-크실렌, 메시틸렌, 비벤질, 비페닐, o-페난트린, 및 나프탈린등과 dimethylsulfoxide사이의 상호작용을 검토했다. 이 유기분자들은 모두 라울의 법칙에서 음의 편차를 나타내며, 전하전이착물을 형성한다고 생각된다. 그 착물의 안정도상수를 분광광도법으로 측정하고, 몇가지 열력학함수를 계산했으며 결합에너지가 대개 -1∼-4 kcal/몰임을 알았다. 한편 용매의 영향을 검토하여 착물의 안정도가 용매의 극성은 물론 염기도에 크게 의존함을 알았다.

  • PDF

Cartridge에 의한 지질과 폐놀물질 혼합산화물의 분리 (Separation in Oxdized Mixture of Lipids and Phenolics by Cartridge)

  • 김정숙
    • 동아시아식생활학회지
    • /
    • 제5권1호
    • /
    • pp.87-93
    • /
    • 1995
  • The oxidized mixture of lipid(methyl linoleate) and phenolics(phloroglucinol) at 37$^{\circ}C$, 82$m\ell$ O/min., for 9 days were separated each by C cartridge and silica cartridge making use of different eluting solvent. And the oxidation products were analyzed by HPLC. In conclusion, the oxidized mixture were separated into methyl linoleate and phloroglucinol by cartridge on HPLC. and also in this experiment, separated methyl linoleate and phloroglucinol could be analyzed in the common eluant, water and acetonitrile on HPLC. SEP-PAK cartridges were used almost sample purification until now, but under the various eluting solvents and conditions, cartridge will be expected to mini columns which can separate different polarity materials.

  • PDF

Synthesis of New N,N-Bis(5-acetylpyridin-2-yl)-phenylamine Derivatives and Their Solvatochromic Effects

  • El-Deeb, Ibrahim Mustafa;Lee, So-Ha
    • 한국응용과학기술학회지
    • /
    • 제25권4호
    • /
    • pp.411-417
    • /
    • 2008
  • A group of new N,N-bis(5-acetylpyridin-2-yl)phenylamine derivatives was synthesized in good yield applying an optimized Buchwald-Hartwig amination protocol. The synthesized compounds showed UV absorption maxima in the range of 320-360 nm, and showed good luminescence at dilute concentrations in the blue region of the spectra (in the range of 480-497 nm). They showed also a bathochromic shift associating the increase in solvent polarity. The synthesized compounds could be investigated for use in OLEDs or as potential monomers for PLEDs.

Solubility and density of p-dioxanone in organic solvent systems

  • Lee, Sang-Won;Kim, Sung-Il;Park, So-Jin
    • 한국응용과학기술학회지
    • /
    • 제25권4호
    • /
    • pp.429-437
    • /
    • 2008
  • The p-dioxanone can be used to make a variety of commercially useful products particularly where biodegradability is desired, such as fibers, sutures, molded articles, containers, medical devices and surgical clips, film and compostable trash bags. The mole fraction solubility of p-dioxanone in various solvents such as acetone, ethylacetate, tetrahydrofuran, methanol, ethanol, 1-propanol, 1-butanol and 1-pentanol were measured over the temperature range from 263.05 K to 288.45 K. The solubility of p-dioxanone increases with increasing polarity of the solvents.