• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5721-5727
• /
• 2015

페인트는 외부로부터 본체가 손상되는 것을 막아주며, 오랫동안 색깔과 마무리 상태를 유지해 준다. 유기용제와 물이 페인트의 용제로 사용되고 있으며, 유기용제는 VOCs의 인위적인 공급원으로 알려져 있다. 이러한 이유로 자동차 내장부품에서 유기용재 페인트의 사용은 줄어들고 있으며, 외장 부품에서는 계속 사용하고 있다. 수성페인트의 접착력은 유성페인트에 비하여 작아, 페인트가 기제로부터 박리되고 있어, 품질문제를 일으킨다. 본 연구에서는 수성페인트와 실린 혼합물의 접착 특성에 대하여 연구하였다. 수성페인트의 접착력을 향상시키기 위하여 접착제와 혼합이 필요하다. 접착력은 UTM을 이용하여 ASTM D1002 방법으로 측정하였고, 박리현상은 ASTM D1002를 사용하여 측정하였다. 수성페인트와 실란접착제의 최적 혼합조건은 $25^{\circ}C$, 500rpm, 20분 이었으며. 실란접착제 농도는 5wt% 이었다

• 한국의류학회지
• /
• 제23권7호
• /
• pp.1030-1039
• /
• 1999

The effect of surfactant mixture 9on detergency and soil redeposition in a dry-cleaning system was investigated employing Aerosol OT as an anionic surfactant and Span 80 as a nonionic surfactant. The effect of charge system on soil deposition was also investigated in order to determine the optimum condition at which soil redeposition is minimum,. Soil deposition instead of soil redeposition on cotton, polyester and wool fabrics was measured employing petroleum solvent and perchloroethylene as organic solvents. The results were as follows. 1. Surface tension or interfacial tension was not changed by the addition of any surfactant or surfactant mixtures. In petroleum solvent however interfacial tension between solrent and water decreased when surfactants were added and increased when surfactants were mixed,. 2. The maximum amount of water solubilization increased as the mole fraction of Aerosol OT increased and more water was solubilized in petroleum solvent than in perchloroethylene. 3. The detergency of cotton was greater and the soil deposition rate was lower in Span 80 solution than in Aerosol OT solution. The soil deposition on cotton fabric decreased when water was solubilized in Aersol OT solution 4. The detergency and soil deposition rate of polyester fabric did not change by the surfactant type of the addition of surfactant mixture and soil deposition rate increased bywater solubilization. 5. Soil deposition on wool fabric was very high when Arosol OT was employed in perchloroethylene and the soil deposition did not change greatly by water solubilization.

• 자원리싸이클링
• /
• 제25권1호
• /
• pp.16-23
• /
• 2016

황산용액에서 Alamine 336에 의한 몰리브덴과 텅스텐의 분리에 대해 수상의 pH와 추출제의 농도를 변화시키 며 조사했다. 수상의 pH가 3에서 5사이의 범위에서 낮은 농도의 아민에 의해 몰리브덴이 선택적으로 추출되었 다. Alamine 336과 양이온 추출제를 혼합하면 두 금속간의 분리인자가 다음 순서와 같이 증가했다 : D2EPHA > PC88A > Decanol > Versatic acid. Alamine 336과 D2EHPA의 혼합용매에서 몰리브덴과 텅스텐의 탈거율은 매 우 낮았으나, Alamine 336과 Decanol의 혼합용매의 경우 $NH_4OH$ 와 $NH_4Cl$의 혼합용액으로 두 금속을 모두 탈 거할 수 있었다.

• 품질경영학회지
• /
• 제52권2호
• /
• pp.377-394
• /
• 2024

Purpose: To derive the optimal conditions for the Rubber based colloidal suspension manufacturing process, which made using a stirrer, to apply the mixture design method. Methods: We used two process component and one process variable Mixture design to derive the optimal conditions for the process. The response variables were selected for rotational viscometer measures which can represent Rubber based colloidal suspension quality. The input variables were selected as the values of rubber-organic solvent expressed in proportions as process components and stirring amount as a process variable which are controllable factors in the process. Results: Based on the results of the experiment, rubber and organic solvent and the interaction between stirring amount and rubber and the interaction between stirring amount and rubber and organic solvent were significant. Reproducibility of the regression model was confirmed by the observation that the values obtained from the reproducibility experiment fell within the confidence interval. Additionally, the model predictions were found to be in close agreement with the field measurements. Conclusion: In this study, a regression model was developed to predict the viscosity change of colloidal suspensions based on the proportion of rubber based colloidal suspension. The developed regression model can lead to improved product quality.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.29-41
• /
• 2018

공비점이 존재하거나 상대휘발도 차이가 적은 2성분 혼합물은 단일 증류탑으로 분리하기 어렵다. 이때 혼합물에서 분리가 어려운 영역을 투과증발막을 사용하여 분리하면 효율적인 공정을 설계할 수 있다. 본 연구에서는 물-유기용매 혼합물을 분리하기 위한 증류-투과증발막 혼성공정을 제시하고, 물-초산 혼합물과 물-에탄올 혼합물의 분리공정을 각각 모사하였다. 증류탑 상부 흐름이 친수성 막을 통과하여 물을 높은 순도로 분리하는 공정을 모사하였다. 실험과 문헌에서 얻은 친수성 막의 투과도를 토대로 막 모델을 만들어 막 면적을 계산하였다. 제시한 공정의 최적화를 위해, 목적함수를 연간 총 비용으로 정하고 주요 설계 변수들을 최적화 변수로 하여 최적화 문제를 구성하였다. 또한, 혼성공정의 각 최적화 변수의 변화에 따른 목적함수 값의 변화 추세를 나타내고 최적화 변수를 최적점에 가까운 값으로 쉽게 추측할 수 있는 방법을 제안하였다.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.66-71
• /
• 2011

Various single solvents were tested to find the effective solvent for the extraction of algae oil from wet-form Chlorella minutissima. In the case of single solvents, their extractabilities for algae oil were increased with their polarity because the water in wet algae cell is to form a solvent shell around the lipids. Based on these results, the wet-form algae samples were treated with a polar alcohol solvent and then a nonpolar solvent was added in algae residue. In the algae oil extraction by ethanol/n-hexane, total lipid contents were 40-50% and composition of triglyceride in extracted oil was 46.50%. Considering solvent toxicity of conventional solvent mixture such as chloroform and methanol for algae oil extraction, the ethanol/n-hexane system was identified as the effective one for the oil extraction from wet-form Chlorella minutissima.

• Journal of Microbiology and Biotechnology
• /
• 제11권4호
• /
• pp.712-715
• /
• 2001

A new combined method including the enzymatic hydrolysis of $\beta$-cyclodextrin ($\beta$-CD) and solvent extraction fo cholesterol from the hydrolyzed mixture was developed to recover cholesterol from a $\beta$-CD-cholesterol complex prepared from dairy products, such as cream, milk, and cheese. Cyclomaltodextrinase (cyclomatodextrin dextrin hydrolase, EC 3.2.1.54, DCase_ prepared form alkalophilic Bacillus sp. KJ 133 hydrolyzed the $\beta$-DC of the $\beta$-CD-cholesterol complex, and then, free cholesterol was efficiently extracted from the hydrolyzed mixture by a nonpolar solvent such as ethyl acetate. To increase the stability of free CDase, immobilized CDase was developed using sodium alginate as a carrier. The immobilized CDase showed a high recovery yield of cholesterol in a time-dependent manner compared to the free CDase. A gas chromatography analysis showed that more than 70% of cholesterol was recovered from the $\beta$-DC-cholesterol complex of cream by the immobilized CDase, whereas only 3% and 29% of cholesterol were recovered when the solvent extraction and free CDase treatment were used, respectively. The cholesterol recovered can be used as a raw material for steroid synthesis. Furthermore, this method can be an efficient way to recover cholesterol or other organic compounds that are bound in a $\beta$ -DC-cholesterol or -organic compound complex.

• KSBB Journal
• /
• 제26권4호
• /
• pp.283-292
• /
• 2011

Solid dispersion is one of well-established pharmaceutical techniques to improve the dissolution and consequent bioavailability of poorly water soluble drugs. It is defined as a dispersion of drug in an inert carrier matrix. Solid dispersions can be classified into three generations according to the carrier used in the system. First and second generations consist of crystalline and amorphous substances, respectively. Third generation carriers are surfactant, mixture of polymer and surfactants, and mixture of polymers. Solid dispersions can be generallyprepared by melting method and solvent method. While melting method requires high temperature to melt carrier and dissolve drug, solvent method utilizes solvent to dissolve the components. The improvement in dissolution through solid dispersions is attributed to reduction in drug particle size, improvement in wettability, and/or formation of amorphous state. The primary characteristics of solid dispersions, the presenceof drug in amorphous state, could be determined by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and fourier-transformed infrared spectroscopy (FTIR). In spite of the significant improvement in dissolution by solid dispersion technique, some drawbacks have limited the commercial application of solid dispersions. Thus, further studies should be conducted in a direction to improve the congeniality to commercialization.

• 한국화재소방학회논문지
• /
• 제28권4호
• /
• pp.44-49
• /
• 2014

혼합물의 최소자연발화온도는 가연성액체의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 Propionic acid와 3-Hexanone 계의 최소자연발화온도와 발화지연시간을 측정하였다. 2성분계를 구성하는 순수물질인 Propionic acid와 3-Hexanone 계의 최소자연발화온도는 각 각 $511^{\circ}C$와 $425^{\circ}C$로 측정되었다. 그리고 측정된 Propionic acid와 3-Hexanone 혼합물의 최소자연발화온도 실험값은 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다. 그리고 Propionic acid와 3-Hexanone 계는 일부 혼합 조성에서 두 개의 순수물질 가운데 작은 AIT 보다 낮게 측정된 AIT를 보이는 최소자연발화온도거동(Minimum Autoignition Temperature Behavior, MAITB)을 보이고 있다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.145-148
• /
• 2000

Large-scale resolution of epoxides by the yeast Rhodotorula glutinis was demonstrated in an aqueous/organic two-phase cascade membrane bioreactor. Due to the chemical instability and low solubility of epoxides in aqueous phases, an organic solvent was introduced into the reaction mixture in order to enhance resolution of epoxide. A cascade hollow-fiber membrane bioreactor was used (i) to minimize the toxicity of organic solvents towards the epoxide hydrolase of Rhodotorula glutinis, and (ii) to remove inhibitory amounts of formed diol from the yeast cell containing aqueous phase. Dodecane was selected as a suitable solvent and 1,2-epoxyhexane as a model substrate. By use of this membrane bioreactor, highly concentrated (0.9 M in dodecane) enantiopure (>98% ee) (S)-1,2-epoxyhexane (6.5 g, 30% yield) was obtained from its racemic mixture.